| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Issue summary: When the X509_VERIFY_PARAM_set1_email is called by an
application to validate a crafted e-mail address, such as during S/MIME
message validation, an out of bounds read can happen.
Impact summary: This out of bounds read will not directly exfiltrate
the data read to the attacker so the most likely result is a crash and
a Denial of Service.
An internal helper function called from X509_VERIFY_PARAM_[set|add]_email()
used a wrong length when validating the local part of an email address.
This could cause the 64 octet limit on the local part of an email address
to be not enforced, or cause an out of bound read and potentially a crash.
The bug is reachable via S-MIME validation with a crafted From: address
supplied in an email message that can potentially cause a crash.
No FIPS modules are affected by this issue as the affected code is outside
the OpenSSL FIPS module boundary. |
| Issue summary: When EVP_PKEY_derive_set_peer() is called with a DHX (X9.42)
peer key, the peer key is not properly checked for the subgroup membership.
Impact summary: A malicious peer which presents an X9.42 key carrying the
victim's p and g parameters, a forged q = r (a small prime factor of the
cofactor (p−1)/q_local), and a public value Y of order r can recover the
victim's private key after a small number of key exchange attempts.
When EVP_PKEY_derive_set_peer() is called with a DHX (X9.42) peer key, the
subgroup membership check Y^q ≡ 1 (mod p) is performed using the peer's
own q parameter, not the local key's q. The peer's domain parameters are
then matched against the domain parameters of the private key, but the value
of q is not compared.
A malicious peer who presents an X9.42 key carrying the victim's p, g,
a forged q = r (a small prime factor of the cofactor), and a public
value Y of order r passes all checks. The shared secret then takes only
r distinct values, leaking priv mod r. Repeating for each small-prime
factor of the cofactor and combining via CRT recovers the full private
key (Lim–Lee / small-subgroup-confinement attack).
The realistic attack surface is narrow: principally CMP deployments with
long-lived RA/CA DHX keys and bespoke enterprise or government applications
using X9.42 DHX static keys with interactive protocols and therefore this
issue was assigned Low severity.
The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are affected by this
issue. |
| Issue Summary: An error in the callback used to verify the certificate
provided in a Root CA key update Certificate Management Protocol (CMP)
message response rendered the certificate validation ineffectual, which
could lead to escalation of credentials from the Registration Authority (RA)
level to the root Certification Authority (root CA) level.
Impact Summary: The Registration Autority could replace the root CA
certificate for the CMP clients with an arbitrary root CA certificate.
One of the parts of the Certificate Management Protocol (CMP), specified in
RFC 9810, is Root Certification Authority (root CA) key Rollover,
which is sent by the server in a message with type 'id-it-rootCaKeyUpdate'.
As part of these messages, 'newWithOld' certificate, the new root CA
certificate signed with the old root CA key, is provided, and verifying its
signature is crucial for transferring the trust from the old CA key to the
new one.
The 'id-it-rootCaKeyUpdate' messages are expected to be processed with
OSSL_CMP_get1_rootCaKeyUpdate(), that is expected to verify the 'newWithOld'
certificate. A typo in the certificate chain building code led to adding
an incorrect certificate ('newWithOld' instead of 'oldRoot') to the
certificate chain, rendering the certificate verification process ineffectual
(only the issuer name and the algorithm OIDs were verified by other parts
of the verification code).
An attacker who already has credentials that satisfy the CMP message
protection checks can generate a new key pair and use a crafted self-signed
certificate in its 'id-it-rootCaKeyUpdate' CMP messages which affected CMP
clients would accept as a new trust anchor.
Significant preconditions for the attack (having valid RA-level credentials)
are the reason the issue was assigned Low severity.
The FIPS modules are not affected by this issue, as the affected code is
outside the OpenSSL FIPS module boundary. |
| Issue summary: The CMS_decrypt and PKCS7_decrypt functions are vulnerable to
Bleichenbacher-style attack when an attacker is able to provide the CMS or
S/MIME messages and observe the error code and/or decryption output.
Impact summary: The Bleichenbacher-style attack allows an attacker to use the
victim's vulnerable application as a way to decrypt or sign messages with the
victim's private RSA key.
The attack is possible in 2 variants.
1. The decryption API (CMS_decrypt(), PKCS7_decrypt()) is used without
providing the recipient certificate. In this case OpenSSL iterates over every
KeyTransRecipientInfo (KTRI) without stopping at the first success.
An attacker who authors a message with two KTRI entries — the first one
wrapping a real CEK under the victim's public key, the second with an
arbitrary probe ciphertext — obtains opportunity to iterate the 2nd KTRI to
get a valid PKCS#1 v1.5 padding if the error code of the application is
available.
That is a Bleichenbacher oracle (Bleichenbacher, CRYPTO '98): an
adaptive-chosen-ciphertext side channel from which the attacker decrypts any
RSA ciphertext to the victim's key or forges any PKCS#1 v1.5 signature under
it.
2. When the decryption API (CMS_decrypt(), PKCS7_decrypt()) is provided with
the recipient certificate, and the recipient is not found, a random
key is substituted.
An attacker who authors a message and is able to compare both error code and
the result of the decryption, can mount a Bleichenbacher oracle.
We are not aware of any applications that provide a remote attacker
an opportunity to mount an attack described in these scenarios. We consider
the existence of such application very unlikely, and for this reason this
CVE has been evaluated as Low severity.
To avoid these attacks, when RSA PKCS#1 v1.5 Key Transport is in use, the
invoked EVP_PKEY_decrypt() will use the implicit rejection mechanism described
in draft-irtf-cfrg-rsa-guidance. In previous OpenSSL releases the implicit
rejection was explicitly disabled.
The implicit rejection mechanism always returns a plaintext value,
the symmetric key. This result is deterministic for the ciphertext and the
private key. The length of the decryption result can happen to match the
length of the key of the symmetric cipher that was used for the content
encryption. When a certificate is not provided, the last RecipientInfo
producing a key that looks valid will be used. It may cause getting garbage
content on decryption. As a proper way to deal with this a recipient
certificate has to be provided to identify the particular RecipientInfo for
decryption.
The FIPS modules in 4.0, 3.6, 3.5, and 3.4 are not affected by this issue, as
CMS and S/MIME processing happens outside the OpenSSL FIPS module boundary. |
| Issue summary: An attacker-controlled CMP (Certificate Management Protocol)
server could trigger a NULL pointer dereference in a CMP client application.
Impact summary: A NULL pointer dereference causes a crash of the
application and a Denial of Service.
An attacker controlling a CMP server (or acting as a man-in-the-middle) could
craft a CMP response containing a CRMF (Certificate Request Message Format)
CertRepMessage with an EncryptedValue structure where the symmAlg field
has an algorithm OID but no parameters field. When the OpenSSL CMP client
processes this response, the NULL dereference occurs, causing a crash of
the CMP client.
Applications that process untrusted CMP/CRMF messages may be affected.
The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this
issue, as the affected code is outside the OpenSSL FIPS module boundary. |
| Issue summary: A specially crafted password-encrypted CMS message
can trigger a NULL pointer dereference during CMS decryption.
Impact summary: This NULL pointer dereference leads to an application crash
and a Denial of Service.
The CMS PasswordRecipientInfo.keyDerivationAlgorithm field is defined as
OPTIONAL in the ASN.1 specification and may therefore be absent in specially
crafted inputs. During the password-based CMS decryption the OpenSSL
CMS implementation dereferences this field without first checking whether it
was present.
An attacker who supplies such a CMS message to an application performing
password-based CMS decryption can trigger an application crash, leading to
a Denial of Service.
Applications that process password-encrypted CMS messages may be affected.
The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this
issue, as the affected code is outside the OpenSSL FIPS module boundary. |
| Issue summary: When a partial-chain certificate verification is enabled
together with OCSP response checking for the whole chain, a NULL dereference
will happen if the verified chain does not have a self-signed trusted anchor,
crashing the process.
Impact summary: A NULL pointer dereference can trigger a crash which leads to a
Denial of Service for an application.
When performing OCSP response checking for certificates in the verification
chain, the code always tries to access the next certificate as the issuer.
There is a check for a self-signed certificate. However with the partial
chain verification enabled when the chain does not have a self-signed trusted
anchor, the issuer will be NULL for the last certificate in the chain. A NULL
pointer dereference then happens.
This issue affects only applications which enable both OCSP verification
of the certificate chain (X509_V_FLAG_OCSP_RESP_CHECK_ALL) and partial
chain verification (X509_V_FLAG_PARTIAL_CHAIN) in the certificate
verification. Both flags are disabled by default. For that reason, we have
assigned Low severity to the issue.
No FIPS modules are affected by this issue as the affected code is outside
the OpenSSL FIPS module boundary. |
| Issue summary: Receiving a QUIC initial packet with an invalid token may
trigger a NULL pointer dereference in the OpenSSL QUIC server with
address validation disabled.
Impact summary: NULL pointer dereference typically causes abnormal termination
of the affected QUIC server process and a Denial of Service.
If the address validation is disabled in the OpenSSL QUIC server
implementation, an attacker can crash the server by sending an initial
packet with an invalid or expired token.
By default, the client address validation is enabled in the OpenSSL QUIC server
implementation, which makes the default configuration not vulnerable
to this issue. However if the SSL_LISTENER_FLAG_NO_VALIDATE is used with
the SSL_new_listener() call, the address validation is disabled making the
vulnerable code reachable.
The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this
issue, as the affected code is outside the OpenSSL FIPS module boundary. |
| Issue summary: A malicious server can exploit TLS OCSP stapling by delivering
a crafted response through the status_request extension, triggering a
double-free in the client's certificate verification path.
Impact summary: Successful exploitation allows an attacker to corrupt heap
memory via a double-free, potentially leading to a Denial of Service or
possibly an attacker controlled code execution or other undefined behavior.
If OCSP stapling is enabled and the TLS client connects to a malicious server,
a crafted OCSP stapled response can trigger a double free in the TLS client
when the stapled response is checked.
The OCSP stapling is not enabled by default. Reliable code execution
through a double-free is technically complex and highly environment-dependent
but the Denial of Service impact is straightforward to achieve, warranting
Moderate severity.
No FIPS modules are affected by this issue as the affected code is outside
the OpenSSL FIPS module boundary. |
| Issue summary: Remote peer may exhaust heap memory of the QUIC
server or client by flooding it with packets containing PATH_CHALLENGE
frames.
Impact summary: A malicious remote peer can cause an unbounded
memory allocation which can lead to an abnormal termination of the
application acting as a QUIC client or server and a Denial of Service.
A remote peer may exhaust heap memory by flooding the local
QUIC stack with PATH_CHALLENGE frames. The local QUIC stack
allocates a PATH_RESPONSE frame for every PATH_CHALLENGE it receives.
The allocated PATH_RESPONSE frame gets freed only when the remote
peer acknowledges reception of the PATH_RESPONSE frame which will
not be done by a malicious peer.
The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by
this issue. The QUIC stack is outside of OpenSSL FIPS module
boundary. |
| Issue Summary: Cryptographic Message Services (CMS) processing fails to perform
sufficient input validation on the cipher and tag length fields of
AuthEnvelopedData containers, leading to various potential compromises.
Impact Summary: Attackers making use of these vulnerabilities may achieve
key-equivalent functionality for a given CMS recipient and/or bypass integrity
validation for a given message.
In one use case, an attacker may send a CMS message containing
AuthEnvelopedData with the cipher specified as a non-AEAD cipher. OpenSSL
erroneously allows this selection, and attempts to decrypt and validate the
message.
An on-path attacker who captures one legitimate AES-GCM AuthEnvelopedData
addressed to the victim can re-emit it with the recipientInfos set left
byte-for-byte intact, so the victim's private key still unwraps the genuine CEK
(the content-encryption key), but with the inner OID rewritten to AES-256-OFB
(Output Feedback Mode, an unauthenticated keystream mode) and with an
attacker-chosen IV and ciphertext. The victim initializes AES-256-OFB under the
real CEK, never consults the MAC field, and CMS_decrypt() returns success.
If the application under attack responds to the attacker with any indicator
showing success or failure of the decryption effort, it is possible for the
attacker to use this as an oracle to obtain key equivalent functionality for the
CEK used for the chosen recipient of the message.
In another use case, an attacker can reduce the tag length of the chosen AEAD
cipher for a given AuthEnvelopedData container to be a single byte long,
allowing an attacker to brute force CMS decryption, producing an integrity
bypass for applications that trust CMS_decrypt() to reject modified content.
The FIPS modules are not affected by this issue. |
| Issue Summary: The PKCS#12 file processing fails to perform sufficient input
validation for files that use Password-Based Message Authentication Code 1
(PBMAC1) integrity mechanism allowing a certificate and private key forgery.
Impact Summary: An attacker impersonating a user can cause a service reading
PKCS#12 files to accept forged certificates and private keys with a 1 in 256
probability.
If a service accepting PKCS#12 files is using passwords for authenticating
the received files, the attacker can create unencrypted PKCS#12 files that
use PBMAC1 authentication that specifies an HMAC key of only one byte, allowing
them to craft a file that will be accepted with a 1 in 256 probability.
That would then cause the service to accept a certificate and private key
controlled by the attacker.
The FIPS modules are not affected by this issue, as the affected code is
outside the OpenSSL FIPS module boundary. |
| Issue summary: Parsing a crafted DER-encoded ASN.1 structure with a primitive
element whose content exceeds 2 gigabytes in length may cause a heap buffer
over-read on 64-bit Unix and Unix-like platforms.
Impact summary: The heap buffer over-read may crash the application (Denial of
Service) or to load into the decoded ASN.1 object contents of memory beyond the
end of the input buffer. More typically such ASN.1 elements would instead be
truncated.
An integer truncation in OpenSSL's ASN.1 decoder causes the content length of
an ASN.1 primitive element to be mishandled when it exceeds 2 gigabytes. In the
worst case the truncated length is treated as a request to scan the binary
content for a terminating zero byte, possibly causing OpenSSL to read either
less than or beyond the end of the allocated buffer.
Applications that pass attacker-supplied data to d2i_X509(), d2i_PKCS7(), or
any other d2i_* decoding function are affected. OpenSSL's own command-line
tools are not vulnerable, as data read through the BIO layer is checked before
it reaches the affected code. The issue only affects 64-bit Unix and Unix-like
platforms; 32-bit platforms and 64-bit Windows are not affected.
The FIPS modules in 4.0, 3.6, 3.5, 3.4 and 3.0 are not affected by this issue,
as the affected code is outside the OpenSSL FIPS module boundary. |
| Issue summary: When CMS password-based decryption (RFC 3211 / PWRI key unwrap)
processes attacker-supplied CMS data, an attacker-chosen stream-mode KEK
cipher can trigger a heap out-of-bounds read in kek_unwrap_key().
Impact summary: A heap buffer over-read may trigger a crash which leads to
Denial of Service for an application if the input buffer ends at a memory
page boundary and the following page is unmapped. There is no information
disclosure as the over-read bytes are not revealed to the attacker.
The key unwrapping function performs a check-byte test as specified in the
RFC that reads 7 bytes from a heap allocation that is based on the wrapped
key length from the message. There is a minimum length check based on the
block length of the wrapping cipher. However the cipher is selected from
an OID carried in the attacker's PWRI keyEncryptionAlgorithm with no
requirement that the cipher be a block cipher. When an attacker selects
a stream-mode cipher the guard will be ineffective and the allocated buffer
containing the unwrapped key can be too small to fit the check-bytes
specified in the RFC and a buffer over-read can happen.
Applications calling CMS_decrypt() or CMS_decrypt_set1_password()
(equivalently openssl cms -decrypt -pwri_password ...) on untrusted CMS
data are vulnerable to this issue. No password knowledge is required: the
over-read happens during the unwrap attempt before any authentication
succeeds.
The over-read is limited to a few bytes and is not written to output, so
there is no information disclosure. Triggering a crash requires the
allocation to border unmapped memory, which is unlikely with the normal
allocator.
The FIPS modules are not affected by this issue. |
| FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to version 1.11.1, mod_verto's WebSocket frame loop intercepts a #-prefixed speed-test protocol (#SPU / #SPB / #SPE) before any authentication check. The declared payload size in #SPU was parsed with atoi() and only rejected non-positive values, so an unauthenticated peer could request up to INT_MAX bytes. The server then wrote roughly size * 10 bytes back during the download phase, on the order of 20 GB per request, yielding strong outbound bandwidth amplification from a short request. This issue has been patched in version 1.11.1. |
| The kk blog card plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'blog-card' shortcode in all versions up to, and including, 1.3. This is due to insufficient input sanitization and output escaping on the shortcode's 'href' and 'type' attributes, which are concatenated directly into HTML attribute contexts in the shortcode callback registered in kk-blog-card-shortcode.php. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| A vulnerability has been found in tittuvarghese CollegeManagementSystem 3e476335cfbfb9a049e09f474c7ec885f69a9df3/a38852979f7e27ae67b610dce5979500ef8ebe01. Affected is an unknown function of the file dashboard_page/admin_page.php of the component Admin Interface. The manipulation of the argument UserAuthData leads to improper authorization. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The project was informed of the problem early through an issue report but has not responded yet. |
| FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to version 1.11.1, the mod_verto HTTP request handler allocates a fixed 2 MiB buffer for a POST application/x-www-form-urlencoded body but accepts Content-Length up to just under 10 MiB. The body-read loop is bounded by Content-Length rather than the buffer size, producing an attacker-controlled heap overflow of up to ~8 MiB -- before the HTTP basic-auth check runs. This issue has been patched in version 1.11.1. |
| The Helpfulcrowd Product Reviews plugin for WordPress is vulnerable to Authorization Bypass via PHP Type Juggling in versions up to, and including, 1.2.9. This is due to the `helpfulcrowd_validate_token()` function using a loose comparison operator (`!=`) instead of a strict comparison (`!==`) when validating the `token` parameter, while the corresponding REST route `/wp-json/helpfulcrowd/v1/update-settings` is registered with a `permission_callback` of `__return_true`, making it reachable by unauthenticated users; submitting a JSON boolean `true` as the `token` value causes PHP's loose comparison to evaluate as equal to the non-empty base64-encoded secret string, bypassing the check entirely. This makes it possible for unauthenticated attackers to invoke `helpfulcrowd_settings_endpoint()` and write arbitrary attacker-controlled key-value pairs directly into the `helpfulcrowd_options` WordPress database option via `update_option()` without any sanitization or allowlist filtering, enabling full unauthenticated modification of the plugin's stored configuration. |
| The WP Meta Sort Posts plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 0.9. This is due to missing or incorrect nonce validation on the top-level included script in msp-options.php. This makes it possible for unauthenticated attackers to change the plugin's msp_loop_file and msp_nav_location settings via a forged request via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
