| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: prevent out-of-bounds stream writes by validating *pos
ksmbd_vfs_stream_write() did not validate whether the write offset
(*pos) was within the bounds of the existing stream data length (v_len).
If *pos was greater than or equal to v_len, this could lead to an
out-of-bounds memory write.
This patch adds a check to ensure *pos is less than v_len before
proceeding. If the condition fails, -EINVAL is returned. |
| The rtsol(8) and rtsold(8) programs do not validate the domain search list options provided in router advertisement messages; the option body is passed to resolvconf(8) unmodified.
resolvconf(8) is a shell script which does not validate its input. A lack of quoting meant that shell commands pass as input to resolvconf(8) may be executed. |
| In some cases, the `tcp-setmss` handler may free the packet data and throw an error without halting the rule processing engine. A subsequent rule can then allow the traffic after the packet data is gone, resulting in a NULL pointer dereference.
Maliciously crafted packets sent from a remote host may result in a Denial of Service (DoS) if the `tcp-setmss` directive is used and a subsequent rule would allow the traffic to pass. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: Fix kernel crash due to PR_SET_TAGGED_ADDR_CTRL
When userspace does PR_SET_TAGGED_ADDR_CTRL, but Supm extension is not
available, the kernel crashes:
Oops - illegal instruction [#1]
[snip]
epc : set_tagged_addr_ctrl+0x112/0x15a
ra : set_tagged_addr_ctrl+0x74/0x15a
epc : ffffffff80011ace ra : ffffffff80011a30 sp : ffffffc60039be10
[snip]
status: 0000000200000120 badaddr: 0000000010a79073 cause: 0000000000000002
set_tagged_addr_ctrl+0x112/0x15a
__riscv_sys_prctl+0x352/0x73c
do_trap_ecall_u+0x17c/0x20c
andle_exception+0x150/0x15c
Fix it by checking if Supm is available. |
| The rtsock_msg_buffer() function serializes routing information into a buffer. As a part of this, it copies sockaddr structures into a sockaddr_storage structure on the stack. It assumes that the source sockaddr length field had already been validated, but this is not necessarily the case, and it's possible for a malicious userspace program to craft a request which triggers a 127-byte overflow.
In practice, this overflow immediately overwrites the canary for the rtsock_msg_buffer() stack frame, resulting in a panic once the function returns.
The bug allows an unprivileged user to crash the kernel by triggering a stack buffer overflow in rtsock_msg_buffer(). In particular, the overflow will corrupt a stack canary value that is verified when the function returns; this mitigates the impact of the stack overflow by triggering a kernel panic.
Other kernel bugs may exist which allow userspace to find the canary value and thus defeat the mitigation, at which point local privilege escalation may be possible. |
| By default, jailed processes cannot mount filesystems, including nullfs(4). However, the allow.mount.nullfs option enables mounting nullfs filesystems, subject to privilege checks.
If a privileged user within a jail is able to nullfs-mount directories, a limitation of the kernel's path lookup logic allows that user to escape the jail's chroot, yielding access to the full filesystem of the host or parent jail.
In a jail configured to allow nullfs(4) mounts from within the jail, the jailed root user can escape the jail's filesystem root. |
| If two sibling jails are restricted to separate filesystem trees, which is to say that neither of the two jail root directories is an ancestor of the other, jailed processes may nonetheless be able to access a shared directory via a nullfs mount, if the administrator has configured one.
In this case, cooperating processes in the two jails may establish a connection using a unix domain socket and exchange directory descriptors with each other.
When performing a filesystem name lookup, at each step of the lookup, the kernel checks whether the lookup would descend below the jail root of the current process. If the jail root directory is not encountered, the lookup continues.
In a configuration where processes in two different jails are able to exchange file descriptors using a unix domain socket, it is possible for a jailed process to receive a directory for a descriptor that is below that process' jail root. This enables full filesystem access for a jailed process, breaking the chroot.
Note that the system administrator is still responsible for ensuring that an unprivileged user on the jail host is not able to pass directory descriptors to a jailed process, even in a patched kernel. |
| Due to a programming error, blocklistd leaks a socket descriptor for each adverse event report it receives.
Once a certain number of leaked sockets is reached, blocklistd becomes unable to run the helper script: a child process is forked, but this child dereferences a null pointer and crashes before it is able to exec the helper. At this point, blocklistd still records adverse events but is unable to block new addresses or unblock addresses whose database entries have expired.
Once a second, much higher number of leaked sockets is reached, blocklistd becomes unable to receive new adverse event reports.
An attacker may take advantage of this by triggering a large number of adverse events from sacrificial IP addresses to effectively disable blocklistd before launching an attack.
Even in the absence of attacks or probes by would-be attackers, adverse events will occur regularly in the course of normal operations, and blocklistd will gradually run out file descriptors and become ineffective.
The accumulation of open sockets may have knock-on effects on other parts of the system, resulting in a general slowdown until blocklistd is restarted. |
| OpenProject is an open-source, web-based project management software. Prior to 17.2.0, an authenticated project member with BCF import permissions can upload a crafted .bcf archive where the <Snapshot> value in markup.bcf is manipulated to contain an absolute or traversal local path (for example: /etc/passwd or ../../../../etc/passwd). During import, this untrusted <Snapshot> value is used as file.path during attachment processing. As a result, local filesystem content can be read outside the intended ZIP scope. This results in an Arbitrary File Read (AFR) within the read permissions of the OpenProject application user. This vulnerability is fixed in 17.2.0. |
| libexpat before 2.7.5 allows a NULL pointer dereference in the function setContext on retry after an earlier ouf-of-memory condition. |
| libexpat before 2.7.5 allows an infinite loop while parsing DTD content. |
| The qtdemux_tag_add_str_full function in gst/isomp4/qtdemux.c in gst-plugins-good in GStreamer before 1.10.3 allows remote attackers to cause a denial of service (out-of-bounds read and crash) via a crafted tag value. |
| Integer overflow in the gst_vorbis_tag_add_coverart function (gst-libs/gst/tag/gstvorbistag.c) in vorbistag in gst-plugins-base (aka gstreamer-plugins-base) before 0.10.23 in GStreamer allows context-dependent attackers to execute arbitrary code via a crafted COVERART tag that is converted from a base64 representation, which triggers a heap-based buffer overflow. |
| In GStreamer through 1.26.1, the isomp4 plugin's qtdemux_parse_tree function may read past the end of a heap buffer while parsing an MP4 file, leading to information disclosure. |
| The gst_asf_demux_process_ext_content_desc function in gst/asfdemux/gstasfdemux.c in gst-plugins-ugly in GStreamer allows remote attackers to cause a denial of service (out-of-bounds heap read) via vectors involving extended content descriptors. |
| GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been discovered in the gst_jpeg_dec_negotiate function in gstjpegdec.c. This function does not check for a NULL return value from gst_video_decoder_set_output_state. When this happens, dereferences of the outstate pointer will lead to a null pointer dereference. This vulnerability can result in a Denial of Service (DoS) by triggering a segmentation fault (SEGV). This vulnerability is fixed in 1.24.10. |
| GStreamer AV1 Video Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation.
The specific flaw exists within the parsing of tile list data within AV1-encoded video files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-22873. |
| GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference has been discovered in the id3v2_read_synch_uint function, located in id3v2.c. If id3v2_read_synch_uint is called with a null work->hdr.frame_data, the pointer guint8 *data is accessed without validation, resulting in a null pointer dereference. This vulnerability can result in a Denial of Service (DoS) by triggering a segmentation fault (SEGV). This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read has been detected in the function qtdemux_parse_samples within qtdemux.c. This issue arises when the function qtdemux_parse_samples reads data beyond the boundaries of the stream->stco buffer. The following code snippet shows the call to qt_atom_parser_get_offset_unchecked, which leads to the OOB-read when parsing the provided GHSL-2024-245_crash1.mp4 file. This issue may lead to read up to 8 bytes out-of-bounds. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been discovered in the gst_matroska_demux_parse_blockgroup_or_simpleblock function within matroska-demux.c. This function does not properly check the validity of the GstBuffer *sub pointer before performing dereferences. As a result, null pointer dereferences may occur. This vulnerability is fixed in 1.24.10. |
