| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-fsl-lpspi: fix teardown order issue (UAF)
There is a teardown order issue in the driver. The SPI controller is
registered using devm_spi_register_controller(), which delays
unregistration of the SPI controller until after the fsl_lpspi_remove()
function returns.
As the fsl_lpspi_remove() function synchronously tears down the DMA
channels, a running SPI transfer triggers the following NULL pointer
dereference due to use after free:
| fsl_lpspi 42550000.spi: I/O Error in DMA RX
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[...]
| Call trace:
| fsl_lpspi_dma_transfer+0x260/0x340 [spi_fsl_lpspi]
| fsl_lpspi_transfer_one+0x198/0x448 [spi_fsl_lpspi]
| spi_transfer_one_message+0x49c/0x7c8
| __spi_pump_transfer_message+0x120/0x420
| __spi_sync+0x2c4/0x520
| spi_sync+0x34/0x60
| spidev_message+0x20c/0x378 [spidev]
| spidev_ioctl+0x398/0x750 [spidev]
[...]
Switch from devm_spi_register_controller() to spi_register_controller() in
fsl_lpspi_probe() and add the corresponding spi_unregister_controller() in
fsl_lpspi_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
spi: use generic driver_override infrastructure
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1]
Also note that we do not enable the driver_override feature of struct
bus_type, as SPI - in contrast to most other buses - passes "" to
sysfs_emit() when the driver_override pointer is NULL. Thus, printing
"\n" instead of "(null)\n". |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: clamp SCO altsetting table indices
btusb_work() maps the number of active SCO links to USB alternate
settings through a three-entry lookup table when CVSD traffic uses
transparent voice settings. The lookup currently indexes alts[] with
data->sco_num - 1 without first constraining sco_num to the number of
available table entries.
While the table only defines alternate settings for up to three SCO
links, data->sco_num comes from hci_conn_num() and is used directly.
Cap the lookup to the last table entry before indexing it so the
driver keeps selecting the highest supported alternate setting without
reading past alts[]. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix ERTM re-init and zero pdu_len infinite loop
l2cap_config_req() processes CONFIG_REQ for channels in BT_CONNECTED
state to support L2CAP reconfiguration (e.g. MTU changes). However,
since both CONF_INPUT_DONE and CONF_OUTPUT_DONE are already set from
the initial configuration, the reconfiguration path falls through to
l2cap_ertm_init(), which re-initializes tx_q, srej_q, srej_list, and
retrans_list without freeing the previous allocations and sets
chan->sdu to NULL without freeing the existing skb. This leaks all
previously allocated ERTM resources.
Additionally, l2cap_parse_conf_req() does not validate the minimum
value of remote_mps derived from the RFC max_pdu_size option. A zero
value propagates to l2cap_segment_sdu() where pdu_len becomes zero,
causing the while loop to never terminate since len is never
decremented, exhausting all available memory.
Fix the double-init by skipping l2cap_ertm_init() and
l2cap_chan_ready() when the channel is already in BT_CONNECTED state,
while still allowing the reconfiguration parameters to be updated
through l2cap_parse_conf_req(). Also add a pdu_len zero check in
l2cap_segment_sdu() as a safeguard. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix deadlock in l2cap_conn_del()
l2cap_conn_del() calls cancel_delayed_work_sync() for both info_timer
and id_addr_timer while holding conn->lock. However, the work functions
l2cap_info_timeout() and l2cap_conn_update_id_addr() both acquire
conn->lock, creating a potential AB-BA deadlock if the work is already
executing when l2cap_conn_del() takes the lock.
Move the work cancellations before acquiring conn->lock and use
disable_delayed_work_sync() to additionally prevent the works from
being rearmed after cancellation, consistent with the pattern used in
hci_conn_del(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: serialize btintel_hw_error() with hci_req_sync_lock
btintel_hw_error() issues two __hci_cmd_sync() calls (HCI_OP_RESET
and Intel exception-info retrieval) without holding
hci_req_sync_lock(). This lets it race against
hci_dev_do_close() -> btintel_shutdown_combined(), which also runs
__hci_cmd_sync() under the same lock. When both paths manipulate
hdev->req_status/req_rsp concurrently, the close path may free the
response skb first, and the still-running hw_error path hits a
slab-use-after-free in kfree_skb().
Wrap the whole recovery sequence in hci_req_sync_lock/unlock so it
is serialized with every other synchronous HCI command issuer.
Below is the data race report and the kasan report:
BUG: data-race in __hci_cmd_sync_sk / btintel_shutdown_combined
read of hdev->req_rsp at net/bluetooth/hci_sync.c:199
by task kworker/u17:1/83:
__hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200
__hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223
btintel_hw_error+0x114/0x670 drivers/bluetooth/btintel.c:254
hci_error_reset+0x348/0xa30 net/bluetooth/hci_core.c:1030
write/free by task ioctl/22580:
btintel_shutdown_combined+0xd0/0x360
drivers/bluetooth/btintel.c:3648
hci_dev_close_sync+0x9ae/0x2c10 net/bluetooth/hci_sync.c:5246
hci_dev_do_close+0x232/0x460 net/bluetooth/hci_core.c:526
BUG: KASAN: slab-use-after-free in
sk_skb_reason_drop+0x43/0x380 net/core/skbuff.c:1202
Read of size 4 at addr ffff888144a738dc
by task kworker/u17:1/83:
__hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200
__hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223
btintel_hw_error+0x186/0x670 drivers/bluetooth/btintel.c:260 |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: fix circular locking dependency in nci_close_device
nci_close_device() flushes rx_wq and tx_wq while holding req_lock.
This causes a circular locking dependency because nci_rx_work()
running on rx_wq can end up taking req_lock too:
nci_rx_work -> nci_rx_data_packet -> nci_data_exchange_complete
-> __sk_destruct -> rawsock_destruct -> nfc_deactivate_target
-> nci_deactivate_target -> nci_request -> mutex_lock(&ndev->req_lock)
Move the flush of rx_wq after req_lock has been released.
This should safe (I think) because NCI_UP has already been cleared
and the transport is closed, so the work will see it and return
-ENETDOWN.
NIPA has been hitting this running the nci selftest with a debug
kernel on roughly 4% of the runs. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Validate PDU length before reading SDU length in l2cap_ecred_data_rcv()
l2cap_ecred_data_rcv() reads the SDU length field from skb->data using
get_unaligned_le16() without first verifying that skb contains at least
L2CAP_SDULEN_SIZE (2) bytes. When skb->len is less than 2, this reads
past the valid data in the skb.
The ERTM reassembly path correctly calls pskb_may_pull() before reading
the SDU length (l2cap_reassemble_sdu, L2CAP_SAR_START case). Apply the
same validation to the Enhanced Credit Based Flow Control data path. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix exception exit lock checking for subprogs
process_bpf_exit_full() passes check_lock = !curframe to
check_resource_leak(), which is false in cases when bpf_throw() is
called from a static subprog. This makes check_resource_leak() to skip
validation of active_rcu_locks, active_preempt_locks, and
active_irq_id on exception exits from subprogs.
At runtime bpf_throw() unwinds the stack via ORC without releasing any
user-acquired locks, which may cause various issues as the result.
Fix by setting check_lock = true for exception exits regardless of
curframe, since exceptions bypass all intermediate frame
cleanup. Update the error message prefix to "bpf_throw" for exception
exits to distinguish them from normal BPF_EXIT.
Fix reject_subprog_with_rcu_read_lock test which was previously
passing for the wrong reason. Test program returned directly from the
subprog call without closing the RCU section, so the error was
triggered by the unclosed RCU lock on normal exit, not by
bpf_throw. Update __msg annotations for affected tests to match the
new "bpf_throw" error prefix.
The spin_lock case is not affected because they are already checked [1]
at the call site in do_check_insn() before bpf_throw can run.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/kernel/bpf/verifier.c?h=v7.0-rc4#n21098 |
| In the Linux kernel, the following vulnerability has been resolved:
driver core: platform: use generic driver_override infrastructure
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1] |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Fix leakage in __construct_region()
Failing the first sysfs_update_group() needs to explicitly
kfree the resource as it is too early for cxl_region_iomem_release()
to do so. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: convert inline data to extents when truncate exceeds inline size
Add a check in ext4_setattr() to convert files from inline data storage
to extent-based storage when truncate() grows the file size beyond the
inline capacity. This prevents the filesystem from entering an
inconsistent state where the inline data flag is set but the file size
exceeds what can be stored inline.
Without this fix, the following sequence causes a kernel BUG_ON():
1. Mount filesystem with inode that has inline flag set and small size
2. truncate(file, 50MB) - grows size but inline flag remains set
3. sendfile() attempts to write data
4. ext4_write_inline_data() hits BUG_ON(write_size > inline_capacity)
The crash occurs because ext4_write_inline_data() expects inline storage
to accommodate the write, but the actual inline capacity (~60 bytes for
i_block + ~96 bytes for xattrs) is far smaller than the file size and
write request.
The fix checks if the new size from setattr exceeds the inode's actual
inline capacity (EXT4_I(inode)->i_inline_size) and converts the file to
extent-based storage before proceeding with the size change.
This addresses the root cause by ensuring the inline data flag and file
size remain consistent during truncate operations. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: prevent immediate PASID reuse case
PASID resue could cause interrupt issue when process
immediately runs into hw state left by previous
process exited with the same PASID, it's possible that
page faults are still pending in the IH ring buffer when
the process exits and frees up its PASID. To prevent the
case, it uses idr cyclic allocator same as kernel pid's.
(cherry picked from commit 8f1de51f49be692de137c8525106e0fce2d1912d) |
| In the Linux kernel, the following vulnerability has been resolved:
HID: magicmouse: avoid memory leak in magicmouse_report_fixup()
The magicmouse_report_fixup() function was returning a
newly kmemdup()-allocated buffer, but never freeing it.
The caller of report_fixup() does not take ownership of the returned
pointer, but it *is* permitted to return a sub-portion of the input
rdesc, whose lifetime is managed by the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: ensure we're polling a polled queue
A user can change the polled queue count at run time. There's a brief
window during a reset where a hipri task may try to poll that queue
before the block layer has updated the queue maps, which would race with
the now interrupt driven queue and may cause double completions. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: asus: avoid memory leak in asus_report_fixup()
The asus_report_fixup() function was returning a newly allocated
kmemdup()-allocated buffer, but never freeing it. Switch to
devm_kzalloc() to ensure the memory is managed and freed automatically
when the device is removed.
The caller of report_fixup() does not take ownership of the returned
pointer, but it is permitted to return a pointer whose lifetime is at
least that of the input buffer.
Also fix a harmless out-of-bounds read by copying only the original
descriptor size. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: meson-spicc: Fix double-put in remove path
meson_spicc_probe() registers the controller with
devm_spi_register_controller(), so teardown already drops the
controller reference via devm cleanup.
Calling spi_controller_put() again in meson_spicc_remove()
causes a double-put. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/efa: Fix use of completion ctx after free
On admin queue completion handling, if the admin command completed with
error we print data from the completion context. The issue is that we
already freed the completion context in polling/interrupts handler which
means we print data from context in an unknown state (it might be
already used again).
Change the admin submission flow so alloc/dealloc of the context will be
symmetric and dealloc will be called after any potential use of the
context. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Fix memory leak when a wq is reset
idxd_wq_disable_cleanup() which is called from the reset path for a
workqueue, sets the wq type to NONE, which for other parts of the
driver mean that the wq is empty (all its resources were released).
Only set the wq type to NONE after its resources are released. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: replace BUG_ON with proper error handling in ext4_read_inline_folio
Replace BUG_ON() with proper error handling when inline data size
exceeds PAGE_SIZE. This prevents kernel panic and allows the system to
continue running while properly reporting the filesystem corruption.
The error is logged via ext4_error_inode(), the buffer head is released
to prevent memory leak, and -EFSCORRUPTED is returned to indicate
filesystem corruption. |
