| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix call removal to use RCU safe deletion
Fix rxrpc call removal from the rxnet->calls list to use list_del_rcu()
rather than list_del_init() to prevent stuffing up reading
/proc/net/rxrpc/calls from potentially getting into an infinite loop.
This, however, means that list_empty() no longer works on an entry that's
been deleted from the list, making it harder to detect prior deletion. Fix
this by:
Firstly, make rxrpc_destroy_all_calls() only dump the first ten calls that
are unexpectedly still on the list. Limiting the number of steps means
there's no need to call cond_resched() or to remove calls from the list
here, thereby eliminating the need for rxrpc_put_call() to check for that.
rxrpc_put_call() can then be fixed to unconditionally delete the call from
the list as it is the only place that the deletion occurs. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Use scratch field in MMIO fragment to hold small write values
When exiting to userspace to service an emulated MMIO write, copy the
to-be-written value to a scratch field in the MMIO fragment if the size
of the data payload is 8 bytes or less, i.e. can fit in a single chunk,
instead of pointing the fragment directly at the source value.
This fixes a class of use-after-free bugs that occur when the emulator
initiates a write using an on-stack, local variable as the source, the
write splits a page boundary, *and* both pages are MMIO pages. Because
KVM's ABI only allows for physically contiguous MMIO requests, accesses
that split MMIO pages are separated into two fragments, and are sent to
userspace one at a time. When KVM attempts to complete userspace MMIO in
response to KVM_RUN after the first fragment, KVM will detect the second
fragment and generate a second userspace exit, and reference the on-stack
variable.
The issue is most visible if the second KVM_RUN is performed by a separate
task, in which case the stack of the initiating task can show up as truly
freed data.
==================================================================
BUG: KASAN: use-after-free in complete_emulated_mmio+0x305/0x420
Read of size 1 at addr ffff888009c378d1 by task syz-executor417/984
CPU: 1 PID: 984 Comm: syz-executor417 Not tainted 5.10.0-182.0.0.95.h2627.eulerosv2r13.x86_64 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 Call Trace:
dump_stack+0xbe/0xfd
print_address_description.constprop.0+0x19/0x170
__kasan_report.cold+0x6c/0x84
kasan_report+0x3a/0x50
check_memory_region+0xfd/0x1f0
memcpy+0x20/0x60
complete_emulated_mmio+0x305/0x420
kvm_arch_vcpu_ioctl_run+0x63f/0x6d0
kvm_vcpu_ioctl+0x413/0xb20
__se_sys_ioctl+0x111/0x160
do_syscall_64+0x30/0x40
entry_SYSCALL_64_after_hwframe+0x67/0xd1
RIP: 0033:0x42477d
Code: <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007faa8e6890e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000004d7338 RCX: 000000000042477d
RDX: 0000000000000000 RSI: 000000000000ae80 RDI: 0000000000000005
RBP: 00000000004d7330 R08: 00007fff28d546df R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004d733c
R13: 0000000000000000 R14: 000000000040a200 R15: 00007fff28d54720
The buggy address belongs to the page:
page:0000000029f6a428 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x9c37
flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc0000000 0000000000000000 ffffea0000270dc8 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888009c37780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888009c37800: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff888009c37880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff888009c37900: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888009c37980: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================
The bug can also be reproduced with a targeted KVM-Unit-Test by hacking
KVM to fill a large on-stack variable in complete_emulated_mmio(), i.e. by
overwrite the data value with garbage.
Limit the use of the scratch fields to 8-byte or smaller accesses, and to
just writes, as larger accesses and reads are not affected thanks to
implementation details in the emulator, but add a sanity check to ensure
those details don't change in the future. Specifically, KVM never uses
on-stack variables for accesses larger that 8 bytes, e.g. uses an operand
in the emulator context, and *al
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: qcom: q6apm: move component registration to unmanaged version
q6apm component registers dais dynamically from ASoC toplology, which
are allocated using device managed version apis. Allocating both
component and dynamic dais using managed version could lead to incorrect
free ordering, dai will be freed while component still holding references
to it.
Fix this issue by moving component to unmanged version so
that the dai pointers are only freeded after the component is removed.
==================================================================
BUG: KASAN: slab-use-after-free in snd_soc_del_component_unlocked+0x3d4/0x400 [snd_soc_core]
Read of size 8 at addr ffff00084493a6e8 by task kworker/u48:0/3426
Tainted: [W]=WARN
Hardware name: LENOVO 21N2ZC5PUS/21N2ZC5PUS, BIOS N42ET57W (1.31 ) 08/08/2024
Workqueue: pdr_notifier_wq pdr_notifier_work [pdr_interface]
Call trace:
show_stack+0x28/0x7c (C)
dump_stack_lvl+0x60/0x80
print_report+0x160/0x4b4
kasan_report+0xac/0xfc
__asan_report_load8_noabort+0x20/0x34
snd_soc_del_component_unlocked+0x3d4/0x400 [snd_soc_core]
snd_soc_unregister_component_by_driver+0x50/0x88 [snd_soc_core]
devm_component_release+0x30/0x5c [snd_soc_core]
devres_release_all+0x13c/0x210
device_unbind_cleanup+0x20/0x190
device_release_driver_internal+0x350/0x468
device_release_driver+0x18/0x30
bus_remove_device+0x1a0/0x35c
device_del+0x314/0x7f0
device_unregister+0x20/0xbc
apr_remove_device+0x5c/0x7c [apr]
device_for_each_child+0xd8/0x160
apr_pd_status+0x7c/0xa8 [apr]
pdr_notifier_work+0x114/0x240 [pdr_interface]
process_one_work+0x500/0xb70
worker_thread+0x630/0xfb0
kthread+0x370/0x6c0
ret_from_fork+0x10/0x20
Allocated by task 77:
kasan_save_stack+0x40/0x68
kasan_save_track+0x20/0x40
kasan_save_alloc_info+0x44/0x58
__kasan_kmalloc+0xbc/0xdc
__kmalloc_node_track_caller_noprof+0x1f4/0x620
devm_kmalloc+0x7c/0x1c8
snd_soc_register_dai+0x50/0x4f0 [snd_soc_core]
soc_tplg_pcm_elems_load+0x55c/0x1eb8 [snd_soc_core]
snd_soc_tplg_component_load+0x4f8/0xb60 [snd_soc_core]
audioreach_tplg_init+0x124/0x1fc [snd_q6apm]
q6apm_audio_probe+0x10/0x1c [snd_q6apm]
snd_soc_component_probe+0x5c/0x118 [snd_soc_core]
soc_probe_component+0x44c/0xaf0 [snd_soc_core]
snd_soc_bind_card+0xad0/0x2370 [snd_soc_core]
snd_soc_register_card+0x3b0/0x4c0 [snd_soc_core]
devm_snd_soc_register_card+0x50/0xc8 [snd_soc_core]
x1e80100_platform_probe+0x208/0x368 [snd_soc_x1e80100]
platform_probe+0xc0/0x188
really_probe+0x188/0x804
__driver_probe_device+0x158/0x358
driver_probe_device+0x60/0x190
__device_attach_driver+0x16c/0x2a8
bus_for_each_drv+0x100/0x194
__device_attach+0x174/0x380
device_initial_probe+0x14/0x20
bus_probe_device+0x124/0x154
deferred_probe_work_func+0x140/0x220
process_one_work+0x500/0xb70
worker_thread+0x630/0xfb0
kthread+0x370/0x6c0
ret_from_fork+0x10/0x20
Freed by task 3426:
kasan_save_stack+0x40/0x68
kasan_save_track+0x20/0x40
__kasan_save_free_info+0x4c/0x80
__kasan_slab_free+0x78/0xa0
kfree+0x100/0x4a4
devres_release_all+0x144/0x210
device_unbind_cleanup+0x20/0x190
device_release_driver_internal+0x350/0x468
device_release_driver+0x18/0x30
bus_remove_device+0x1a0/0x35c
device_del+0x314/0x7f0
device_unregister+0x20/0xbc
apr_remove_device+0x5c/0x7c [apr]
device_for_each_child+0xd8/0x160
apr_pd_status+0x7c/0xa8 [apr]
pdr_notifier_work+0x114/0x240 [pdr_interface]
process_one_work+0x500/0xb70
worker_thread+0x630/0xfb0
kthread+0x370/0x6c0
ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: 6fire: fix use-after-free on disconnect
In usb6fire_chip_abort(), the chip struct is allocated as the card's
private data (via snd_card_new with sizeof(struct sfire_chip)). When
snd_card_free_when_closed() is called and no file handles are open, the
card and embedded chip are freed synchronously. The subsequent
chip->card = NULL write then hits freed slab memory.
Call trace:
usb6fire_chip_abort sound/usb/6fire/chip.c:59 [inline]
usb6fire_chip_disconnect+0x348/0x358 sound/usb/6fire/chip.c:182
usb_unbind_interface+0x1a8/0x88c drivers/usb/core/driver.c:458
...
hub_event+0x1a04/0x4518 drivers/usb/core/hub.c:5953
Fix by moving the card lifecycle out of usb6fire_chip_abort() and into
usb6fire_chip_disconnect(). The card pointer is saved in a local
before any teardown, snd_card_disconnect() is called first to prevent
new opens, URBs are aborted while chip is still valid, and
snd_card_free_when_closed() is called last so chip is never accessed
after the card may be freed. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix NULL i_assoc_inode dereference in nilfs_mdt_save_to_shadow_map
The DAT inode's btree node cache (i_assoc_inode) is initialized lazily
during btree operations. However, nilfs_mdt_save_to_shadow_map()
assumes i_assoc_inode is already initialized when copying dirty pages
to the shadow map during GC.
If NILFS_IOCTL_CLEAN_SEGMENTS is called immediately after mount before
any btree operation has occurred on the DAT inode, i_assoc_inode is
NULL leading to a general protection fault.
Fix this by calling nilfs_attach_btree_node_cache() on the DAT inode
in nilfs_dat_read() at mount time, ensuring i_assoc_inode is always
initialized before any GC operation can use it. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: serialize btintel_hw_error() with hci_req_sync_lock
btintel_hw_error() issues two __hci_cmd_sync() calls (HCI_OP_RESET
and Intel exception-info retrieval) without holding
hci_req_sync_lock(). This lets it race against
hci_dev_do_close() -> btintel_shutdown_combined(), which also runs
__hci_cmd_sync() under the same lock. When both paths manipulate
hdev->req_status/req_rsp concurrently, the close path may free the
response skb first, and the still-running hw_error path hits a
slab-use-after-free in kfree_skb().
Wrap the whole recovery sequence in hci_req_sync_lock/unlock so it
is serialized with every other synchronous HCI command issuer.
Below is the data race report and the kasan report:
BUG: data-race in __hci_cmd_sync_sk / btintel_shutdown_combined
read of hdev->req_rsp at net/bluetooth/hci_sync.c:199
by task kworker/u17:1/83:
__hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200
__hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223
btintel_hw_error+0x114/0x670 drivers/bluetooth/btintel.c:254
hci_error_reset+0x348/0xa30 net/bluetooth/hci_core.c:1030
write/free by task ioctl/22580:
btintel_shutdown_combined+0xd0/0x360
drivers/bluetooth/btintel.c:3648
hci_dev_close_sync+0x9ae/0x2c10 net/bluetooth/hci_sync.c:5246
hci_dev_do_close+0x232/0x460 net/bluetooth/hci_core.c:526
BUG: KASAN: slab-use-after-free in
sk_skb_reason_drop+0x43/0x380 net/core/skbuff.c:1202
Read of size 4 at addr ffff888144a738dc
by task kworker/u17:1/83:
__hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200
__hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223
btintel_hw_error+0x186/0x670 drivers/bluetooth/btintel.c:260 |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/core) Protect regulator operations with mutex
The regulator operations pmbus_regulator_get_voltage(),
pmbus_regulator_set_voltage(), and pmbus_regulator_list_voltage()
access PMBus registers and shared data but were not protected by
the update_lock mutex. This could lead to race conditions.
However, adding mutex protection directly to these functions causes
a deadlock because pmbus_regulator_notify() (which calls
regulator_notifier_call_chain()) is often called with the mutex
already held (e.g., from pmbus_fault_handler()). If a regulator
callback then calls one of the now-protected voltage functions,
it will attempt to acquire the same mutex.
Rework pmbus_regulator_notify() to utilize a worker function to
send notifications outside of the mutex protection. Events are
stored as atomics in a per-page bitmask and processed by the worker.
Initialize the worker and its associated data during regulator
registration, and ensure it is cancelled on device removal using
devm_add_action_or_reset().
While at it, remove the unnecessary include of linux/of.h. |
| Use after free in Views in Google Chrome prior to 148.0.7778.216 allowed a remote attacker who convinced a user to engage in specific UI gestures to execute arbitrary code via a crafted HTML page. (Chromium security severity: High) |
| Use after free in SVG in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use after free in WebGL in Google Chrome prior to 148.0.7778.216 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Use after free in DOM in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: ADD_ADDR rtx: fix potential data-race
This mptcp_pm_add_timer() helper is executed as a timer callback in
softirq context. To avoid any data races, the socket lock needs to be
held with bh_lock_sock().
If the socket is in use, retry again soon after, similar to what is done
with the keepalive timer. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: remove station if connection prep fails
If connection preparation fails for MLO connections, then the
interface is completely reset to non-MLD. In this case, we must
not keep the station since it's related to the link of the vif
being removed. Delete an existing station. Any "new_sta" is
already being removed, so that doesn't need changes.
This fixes a use-after-free/double-free in debugfs if that's
enabled, because a vif going from MLD (and to MLD, but that's
not relevant here) recreates its entire debugfs. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: fix potential UAF in create_big_sync
Add hci_conn_valid() check in create_big_sync() to detect stale
connections before proceeding with BIG creation. Handle the
resulting -ECANCELED in create_big_complete() and re-validate the
connection under hci_dev_lock() before dereferencing, matching the
pattern used by create_le_conn_complete() and create_pa_complete().
Keep the hci_conn object alive across the async boundary by taking
a reference via hci_conn_get() when queueing create_big_sync(), and
dropping it in the completion callback. The refcount and the lock
are complementary: the refcount keeps the object allocated, while
hci_dev_lock() serializes hci_conn_hash_del()'s list_del_rcu() on
hdev->conn_hash, as required by hci_conn_del().
hci_conn_put() is called outside hci_dev_unlock() so the final put
(which resolves to kfree() via bt_link_release) does not run under
hdev->lock, though the release path would be safe either way.
Without this, create_big_complete() would unconditionally
dereference the conn pointer on error, causing a use-after-free
via hci_connect_cfm() and hci_conn_del(). |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: defio: Disconnect deferred I/O from the lifetime of struct fb_info
Hold state of deferred I/O in struct fb_deferred_io_state. Allocate an
instance as part of initializing deferred I/O and remove it only after
the final mapping has been closed. If the fb_info and the contained
deferred I/O meanwhile goes away, clear struct fb_deferred_io_state.info
to invalidate the mapping. Any access will then result in a SIGBUS
signal.
Fixes a long-standing problem, where a device hot-unplug happens while
user space still has an active mapping of the graphics memory. The hot-
unplug frees the instance of struct fb_info. Accessing the memory will
operate on undefined state. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Hold mm structure across iommu_sva_unbind_device()
Some tests trigger a crash in iommu_sva_unbind_device() due to
accessing iommu_mm after the associated mm structure has been
freed.
Fix this by taking an explicit reference to the mm structure
after successfully binding the device, and releasing it only
after the device is unbound. This ensures the mm remains valid
for the entire SVA bind/unbind lifetime. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: fix possible use-after-free in ovpn_net_xmit
When building the skb_list in ovpn_net_xmit, skb_share_check will free
the original skb if it is shared. The current implementation continues
to use the stale skb pointer for subsequent operations:
- peer lookup,
- skb_dst_drop (even though all segments produced by skb_gso_segment
will have a dst attached),
- ovpn_peer_stats_increment_tx.
Fix this by moving the peer lookup and skb_dst_drop before segmentation
so that the original skb is still valid when used. Return early if all
segments fail skb_share_check and the list ends up empty.
Also switch ovpn_peer_stats_increment_tx to use skb_list.next; the next
patch fixes the stats logic. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: mediatek: Drop __initconst from gates
Since commit 8ceff24a754a ("clk: mediatek: clk-gate: Refactor
mtk_clk_register_gate to use mtk_gate struct") the mtk_gate structs
are no longer just used for initialization/registration, but also at
runtime. So drop __initconst annotations. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Flush cache for PASID table before using it
When writing the address of a freshly allocated zero-initialized PASID
table to a PASID directory entry, do that after the CPU cache flush for
this PASID table, not before it, to avoid the time window when this
PASID table may be already used by non-coherent IOMMU hardware while
its contents in RAM is still some random old data, not zero-initialized. |
| Espressif Shared GitHub DangerJS is a reusable GitHub Action CI DangerJS workflow for Espressif GitHub projects. Prior to 1.0.1, the action's entrypoint.sh invoked DangerJS from the caller's workspace after copying the fork's checkout into it, creating an untrusted search path for both binary resolution and Node.js module resolution. A fork pull request processed by a pull_request_target workflow could therefore cause fork-supplied code to execute inside the action container in place of the action's own code. This vulnerability is fixed in 1.0.1. |
