| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| There is a heap-based buffer overflow at fromsixel.c (function: image_buffer_resize) in libsixel 1.8.2 that will cause a denial of service or possibly unspecified other impact. |
| A resample query can be used to trigger out-of-memory crashes in Grafana. |
| In the Linux kernel, the following vulnerability has been resolved:
xdp: produce a warning when calculated tailroom is negative
Many ethernet drivers report xdp Rx queue frag size as being the same as
DMA write size. However, the only user of this field, namely
bpf_xdp_frags_increase_tail(), clearly expects a truesize.
Such difference leads to unspecific memory corruption issues under certain
circumstances, e.g. in ixgbevf maximum DMA write size is 3 KB, so when
running xskxceiver's XDP_ADJUST_TAIL_GROW_MULTI_BUFF, 6K packet fully uses
all DMA-writable space in 2 buffers. This would be fine, if only
rxq->frag_size was properly set to 4K, but value of 3K results in a
negative tailroom, because there is a non-zero page offset.
We are supposed to return -EINVAL and be done with it in such case, but due
to tailroom being stored as an unsigned int, it is reported to be somewhere
near UINT_MAX, resulting in a tail being grown, even if the requested
offset is too much (it is around 2K in the abovementioned test). This later
leads to all kinds of unspecific calltraces.
[ 7340.337579] xskxceiver[1440]: segfault at 1da718 ip 00007f4161aeac9d sp 00007f41615a6a00 error 6
[ 7340.338040] xskxceiver[1441]: segfault at 7f410000000b ip 00000000004042b5 sp 00007f415bffecf0 error 4
[ 7340.338179] in libc.so.6[61c9d,7f4161aaf000+160000]
[ 7340.339230] in xskxceiver[42b5,400000+69000]
[ 7340.340300] likely on CPU 6 (core 0, socket 6)
[ 7340.340302] Code: ff ff 01 e9 f4 fe ff ff 0f 1f 44 00 00 4c 39 f0 74 73 31 c0 ba 01 00 00 00 f0 0f b1 17 0f 85 ba 00 00 00 49 8b 87 88 00 00 00 <4c> 89 70 08 eb cc 0f 1f 44 00 00 48 8d bd f0 fe ff ff 89 85 ec fe
[ 7340.340888] likely on CPU 3 (core 0, socket 3)
[ 7340.345088] Code: 00 00 00 ba 00 00 00 00 be 00 00 00 00 89 c7 e8 31 ca ff ff 89 45 ec 8b 45 ec 85 c0 78 07 b8 00 00 00 00 eb 46 e8 0b c8 ff ff <8b> 00 83 f8 69 74 24 e8 ff c7 ff ff 8b 00 83 f8 0b 74 18 e8 f3 c7
[ 7340.404334] Oops: general protection fault, probably for non-canonical address 0x6d255010bdffc: 0000 [#1] SMP NOPTI
[ 7340.405972] CPU: 7 UID: 0 PID: 1439 Comm: xskxceiver Not tainted 6.19.0-rc1+ #21 PREEMPT(lazy)
[ 7340.408006] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014
[ 7340.409716] RIP: 0010:lookup_swap_cgroup_id+0x44/0x80
[ 7340.410455] Code: 83 f8 1c 73 39 48 ba ff ff ff ff ff ff ff 03 48 8b 04 c5 20 55 fa bd 48 21 d1 48 89 ca 83 e1 01 48 d1 ea c1 e1 04 48 8d 04 90 <8b> 00 48 83 c4 10 d3 e8 c3 cc cc cc cc 31 c0 e9 98 b7 dd 00 48 89
[ 7340.412787] RSP: 0018:ffffcc5c04f7f6d0 EFLAGS: 00010202
[ 7340.413494] RAX: 0006d255010bdffc RBX: ffff891f477895a8 RCX: 0000000000000010
[ 7340.414431] RDX: 0001c17e3fffffff RSI: 00fa070000000000 RDI: 000382fc7fffffff
[ 7340.415354] RBP: 00fa070000000000 R08: ffffcc5c04f7f8f8 R09: ffffcc5c04f7f7d0
[ 7340.416283] R10: ffff891f4c1a7000 R11: ffffcc5c04f7f9c8 R12: ffffcc5c04f7f7d0
[ 7340.417218] R13: 03ffffffffffffff R14: 00fa06fffffffe00 R15: ffff891f47789500
[ 7340.418229] FS: 0000000000000000(0000) GS:ffff891ffdfaa000(0000) knlGS:0000000000000000
[ 7340.419489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7340.420286] CR2: 00007f415bfffd58 CR3: 0000000103f03002 CR4: 0000000000772ef0
[ 7340.421237] PKRU: 55555554
[ 7340.421623] Call Trace:
[ 7340.421987] <TASK>
[ 7340.422309] ? softleaf_from_pte+0x77/0xa0
[ 7340.422855] swap_pte_batch+0xa7/0x290
[ 7340.423363] zap_nonpresent_ptes.constprop.0.isra.0+0xd1/0x270
[ 7340.424102] zap_pte_range+0x281/0x580
[ 7340.424607] zap_pmd_range.isra.0+0xc9/0x240
[ 7340.425177] unmap_page_range+0x24d/0x420
[ 7340.425714] unmap_vmas+0xa1/0x180
[ 7340.426185] exit_mmap+0xe1/0x3b0
[ 7340.426644] __mmput+0x41/0x150
[ 7340.427098] exit_mm+0xb1/0x110
[ 7340.427539] do_exit+0x1b2/0x460
[ 7340.427992] do_group_exit+0x2d/0xc0
[ 7340.428477] get_signal+0x79d/0x7e0
[ 7340.428957] arch_do_signal_or_restart+0x34/0x100
[ 7340.429571] exit_to_user_mode_loop+0x8e/0x4c0
[ 7340.430159] do_syscall_64+0x188/
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: Fix fragment node deletion to prevent buffer leak
After commit b692bf9a7543 ("xsk: Get rid of xdp_buff_xsk::xskb_list_node"),
the list_node field is reused for both the xskb pool list and the buffer
free list, this causes a buffer leak as described below.
xp_free() checks if a buffer is already on the free list using
list_empty(&xskb->list_node). When list_del() is used to remove a node
from the xskb pool list, it doesn't reinitialize the node pointers.
This means list_empty() will return false even after the node has been
removed, causing xp_free() to incorrectly skip adding the buffer to the
free list.
Fix this by using list_del_init() instead of list_del() in all fragment
handling paths, this ensures the list node is reinitialized after removal,
allowing the list_empty() to work correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: Fix possible oob access in mt76_connac2_mac_write_txwi_80211()
Check frame length before accessing the mgmt fields in
mt76_connac2_mac_write_txwi_80211 in order to avoid a possible oob
access.
[fix check to also cover mgmt->u.action.u.addba_req.capab,
correct Fixes tag] |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (macsmc) Fix regressions in Apple Silicon SMC hwmon driver
The recently added macsmc-hwmon driver contained several critical
bugs in its sensor population logic and float conversion routines.
Specifically:
- The voltage sensor population loop used the wrong prefix ("volt-"
instead of "voltage-") and incorrectly assigned sensors to the
temperature sensor array (hwmon->temp.sensors) instead of the
voltage sensor array (hwmon->volt.sensors). This would lead to
out-of-bounds memory access or data corruption when both temperature
and voltage sensors were present.
- The float conversion in macsmc_hwmon_write_f32() had flawed exponent
logic for values >= 2^24 and lacked masking for the mantissa, which
could lead to incorrect values being written to the SMC.
Fix these issues to ensure correct sensor registration and reliable
manual fan control.
Confirm that the reported overflow in FIELD_PREP is fixed by declaring
macsmc_hwmon_write_f32() as __always_inline for a compile test. |
| A heap buffer overflow in the av_bprint_finalize() function of FFmpeg v8.0.1 allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| A heap buffer overflow vulnerability exists in the Netwide Assembler (NASM) due to a lack of bounds checking in the obj_directive() function. This vulnerability can be exploited by a user assembling a malicious .asm file, potentially leading to heap memory corruption, denial of service (crash), and arbitrary code execution. |
| Calling the scanf family of functions with a %mc (malloc'd character match) in the GNU C Library version 2.7 to version 2.43 with a format width specifier with an explicit width greater than 1024 could result in a one byte heap buffer overflow. |
| Heap-based buffer overflow in SCMPX 1.5.1 allows remote attackers to cause a denial of service (application crash) or execute arbitrary code via a long string in a .m3u playlist file. |
| Stack-based buffer overflow in the giomgr process in ESRI ArcSDE service 9.2, as used with ArcGIS, allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via a large number that requires more than 8 bytes to represent in ASCII, which triggers the overflow in an sprintf function call. |
| Opera before 10.01 allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption and application crash) via a crafted domain name. |
| Stack-based buffer overflow in phgrafx in QNX Momentics (aka RTOS) 6.3.2 and earlier allows local users to gain privileges via a long .pal filename in palette/. |
| Stack-based buffer overflow in the String_parse::get_nonspace_quoted function in lib-src/allegro/strparse.cpp in Audacity 1.2.6 and other versions before 1.3.6 allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via a .gro file containing a long string. |
| Stack-based buffer overflow in Hamster Audio Player 0.3a allows remote attackers to execute arbitrary code via a long string in a (1) .m3u or (2) .hpl playlist file. |
| Heap-based buffer overflow in Golden FTP Server (goldenftpd) 1.92 allows remote attackers to cause a denial of service (application crash) and possibly execute arbitrary code via a long PASS command. NOTE: it was later reported that 4.70 is also affected. NOTE: the USER vector is already covered by CVE-2005-0634. |
| Stack-based buffer overflow in the set_color_table function in sunras.c in the SUNRAS plugin in Gimp 2.2.14 allows user-assisted remote attackers to execute arbitrary code via a crafted RAS file. |
| Heap-based buffer overflow in pcre_compile.c in the Perl-Compatible Regular Expression (PCRE) library 7.7 allows context-dependent attackers to cause a denial of service (crash) or possibly execute arbitrary code via a regular expression that begins with an option and contains multiple branches. |
| The License Logging Server (llssrv.exe) in Microsoft Windows 2000 SP4 allows remote attackers to execute arbitrary code via an RPC message containing a string without a null terminator, which triggers a heap-based buffer overflow in the LlsrLicenseRequestW method, aka "License Logging Server Heap Overflow Vulnerability." |
| Buffer underflow in redlight.sys in BufferZone 2.1 and 2.5 allows local users to cause a denial of service (crash) and possibly execute arbitrary code by sending a small buffer size value to the FsSetVolumeInformation IOCTL handler code with a FsSetDirectoryInformation subcode containing a large buffer. |
