| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: csum: Fix OoB access in IP checksum code for negative lengths
Commit 69e3a6aa6be2 ("LoongArch: Add checksum optimization for 64-bit
system") would cause an undefined shift and an out-of-bounds read.
Commit 8bd795fedb84 ("arm64: csum: Fix OoB access in IP checksum code
for negative lengths") fixes the same issue on ARM64. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: add missing cpu_to_node to kvzalloc_node in mlx5e_open_xdpredirect_sq
kvzalloc_node is not doing a runtime check on the node argument
(__alloc_pages_node_noprof does have a VM_BUG_ON, but it expands to
nothing on !CONFIG_DEBUG_VM builds), so doing any ethtool/netlink
operation that calls mlx5e_open on a CPU that's larger that MAX_NUMNODES
triggers OOB access and panic (see the trace below).
Add missing cpu_to_node call to convert cpu id to node id.
[ 165.427394] mlx5_core 0000:5c:00.0 beth1: Link up
[ 166.479327] BUG: unable to handle page fault for address: 0000000800000010
[ 166.494592] #PF: supervisor read access in kernel mode
[ 166.505995] #PF: error_code(0x0000) - not-present page
...
[ 166.816958] Call Trace:
[ 166.822380] <TASK>
[ 166.827034] ? __die_body+0x64/0xb0
[ 166.834774] ? page_fault_oops+0x2cd/0x3f0
[ 166.843862] ? exc_page_fault+0x63/0x130
[ 166.852564] ? asm_exc_page_fault+0x22/0x30
[ 166.861843] ? __kvmalloc_node_noprof+0x43/0xd0
[ 166.871897] ? get_partial_node+0x1c/0x320
[ 166.880983] ? deactivate_slab+0x269/0x2b0
[ 166.890069] ___slab_alloc+0x521/0xa90
[ 166.898389] ? __kvmalloc_node_noprof+0x43/0xd0
[ 166.908442] __kmalloc_node_noprof+0x216/0x3f0
[ 166.918302] ? __kvmalloc_node_noprof+0x43/0xd0
[ 166.928354] __kvmalloc_node_noprof+0x43/0xd0
[ 166.938021] mlx5e_open_channels+0x5e2/0xc00
[ 166.947496] mlx5e_open_locked+0x3e/0xf0
[ 166.956201] mlx5e_open+0x23/0x50
[ 166.963551] __dev_open+0x114/0x1c0
[ 166.971292] __dev_change_flags+0xa2/0x1b0
[ 166.980378] dev_change_flags+0x21/0x60
[ 166.988887] do_setlink+0x38d/0xf20
[ 166.996628] ? ep_poll_callback+0x1b9/0x240
[ 167.005910] ? __nla_validate_parse.llvm.10713395753544950386+0x80/0xd70
[ 167.020782] ? __wake_up_sync_key+0x52/0x80
[ 167.030066] ? __mutex_lock+0xff/0x550
[ 167.038382] ? security_capable+0x50/0x90
[ 167.047279] rtnl_setlink+0x1c9/0x210
[ 167.055403] ? ep_poll_callback+0x1b9/0x240
[ 167.064684] ? security_capable+0x50/0x90
[ 167.073579] rtnetlink_rcv_msg+0x2f9/0x310
[ 167.082667] ? rtnetlink_bind+0x30/0x30
[ 167.091173] netlink_rcv_skb+0xb1/0xe0
[ 167.099492] netlink_unicast+0x20f/0x2e0
[ 167.108191] netlink_sendmsg+0x389/0x420
[ 167.116896] __sys_sendto+0x158/0x1c0
[ 167.125024] __x64_sys_sendto+0x22/0x30
[ 167.133534] do_syscall_64+0x63/0x130
[ 167.141657] ? __irq_exit_rcu.llvm.17843942359718260576+0x52/0xd0
[ 167.155181] entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue
The TQP BAR space is divided into two segments. TQPs 0-1023 and TQPs
1024-1279 are in different BAR space addresses. However,
hclge_fetch_pf_reg does not distinguish the tqp space information when
reading the tqp space information. When the number of TQPs is greater
than 1024, access bar space overwriting occurs.
The problem of different segments has been considered during the
initialization of tqp.io_base. Therefore, tqp.io_base is directly used
when the queue is read in hclge_fetch_pf_reg.
The error message:
Unable to handle kernel paging request at virtual address ffff800037200000
pc : hclge_fetch_pf_reg+0x138/0x250 [hclge]
lr : hclge_get_regs+0x84/0x1d0 [hclge]
Call trace:
hclge_fetch_pf_reg+0x138/0x250 [hclge]
hclge_get_regs+0x84/0x1d0 [hclge]
hns3_get_regs+0x2c/0x50 [hns3]
ethtool_get_regs+0xf4/0x270
dev_ethtool+0x674/0x8a0
dev_ioctl+0x270/0x36c
sock_do_ioctl+0x110/0x2a0
sock_ioctl+0x2ac/0x530
__arm64_sys_ioctl+0xa8/0x100
invoke_syscall+0x4c/0x124
el0_svc_common.constprop.0+0x140/0x15c
do_el0_svc+0x30/0xd0
el0_svc+0x1c/0x2c
el0_sync_handler+0xb0/0xb4
el0_sync+0x168/0x180 |
| In the Linux kernel, the following vulnerability has been resolved:
sched: sch_cake: add bounds checks to host bulk flow fairness counts
Even though we fixed a logic error in the commit cited below, syzbot
still managed to trigger an underflow of the per-host bulk flow
counters, leading to an out of bounds memory access.
To avoid any such logic errors causing out of bounds memory accesses,
this commit factors out all accesses to the per-host bulk flow counters
to a series of helpers that perform bounds-checking before any
increments and decrements. This also has the benefit of improving
readability by moving the conditional checks for the flow mode into
these helpers, instead of having them spread out throughout the
code (which was the cause of the original logic error).
As part of this change, the flow quantum calculation is consolidated
into a helper function, which means that the dithering applied to the
ost load scaling is now applied both in the DRR rotation and when a
sparse flow's quantum is first initiated. The only user-visible effect
of this is that the maximum packet size that can be sent while a flow
stays sparse will now vary with +/- one byte in some cases. This should
not make a noticeable difference in practice, and thus it's not worth
complicating the code to preserve the old behaviour. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rtrs-srv: Bound RDMA-Write length to chunk size in rdma_write_sg
When the server answers an RTRS READ, rdma_write_sg() builds the source
scatter/gather entry for the IB_WR_RDMA_WRITE that returns data to the
peer. Its length is taken directly from the wire descriptor:
plist->length = le32_to_cpu(id->rd_msg->desc[0].len);
rd_msg points into the chunk buffer that the remote peer filled via
RDMA-WRITE-WITH-IMM (rtrs_srv_rdma_done() -> process_io_req() ->
process_read()), so desc[0].len is attacker-controlled and, before this
change, was only rejected when zero. The source address is the fixed
chunk start (dma_addr[msg_id]) and the source lkey is the PD-wide
local_dma_lkey, which is not tied to the chunk's MR mapping, so the verbs
layer does not constrain the transfer length to max_chunk_size. msg_id
and off are bounded against queue_depth and max_chunk_size in
rtrs_srv_rdma_done(), but desc[0].len is a separate field that was not
checked against the chunk size.
A peer that advertises desc[0].len larger than max_chunk_size can make
the posted RDMA write read past the chunk's mapped region. The resulting
behaviour depends on the IOMMU configuration: with no IOMMU or in
passthrough mode the read may extend into memory adjacent to the chunk
and be returned to the peer, which can disclose host memory; with a
translating IOMMU the out-of-range access is expected to fault and abort
the connection. In either case the transfer exceeds what the protocol
permits and is driven by a remote peer.
Reject a descriptor length above max_chunk_size, mirroring the existing
off >= max_chunk_size bound in rtrs_srv_rdma_done(). Legitimate clients
do not exceed it: the client sets desc[0].len to its MR length, which is
capped at the negotiated max_io_size (max_chunk_size - MAX_HDR_SIZE). |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-auth: validate reply message payload bounds against transfer length
nvmet_auth_reply() accesses the variable-length rval[] array using
attacker-controlled hl (hash length) and dhvlen (DH value length) fields
without verifying they fit within the allocated buffer of tl bytes.
A malicious NVMe-oF initiator can craft a DHCHAP_REPLY message with a
small transfer length but large hl/dhvlen values, causing out-of-bounds
heap reads when the target processes the DH public key (rval + 2*hl) or
performs the host response memcmp.
With DH authentication configured, the OOB pointer is passed directly to
sg_init_one() and read by crypto_kpp_compute_shared_secret(), reaching
up to 526 bytes past the buffer. This is exploitable pre-authentication.
Add bounds validation ensuring sizeof(*data) + 2*hl + dhvlen <= tl before
any access to the variable-length fields.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: kalmia: bound RX frame length in kalmia_rx_fixup()
kalmia_rx_fixup() computes usb_packet_length = skb->len - (2 *
KALMIA_HEADER_LENGTH) as a u16, guarded only by a pre-loop check that
skb->len is at least KALMIA_HEADER_LENGTH, which is 6. A device can
deliver a short bulk-IN frame with skb->len in the 6 to 11 range, or
leave a short trailing remainder on a later loop iteration. Either case
underflows usb_packet_length to about 65530.
That bypasses the usb_packet_length < ether_packet_length truncation path.
The device-supplied ether_packet_length, a le16 up to 65535 read from
header_start[2], then drives a memcmp() and the following skb_trim() and
skb_pull() past the end of the rx buffer. The rx buffer is hard_mtu * 10,
which is 14000 bytes. That is an out of bounds read.
Require both the start and end framing headers to be present before
subtracting them, on every loop iteration. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Fix out-of-bounds firmware read in nxp_recv_fw_req_v3()
During the v3 firmware download the controller sends a v3_data_req with a
32 bit offset and a 16 bit len. nxp_recv_fw_req_v3() checks only the lower
bound of the offset and then sends firmware from that offset.
nxpdev->fw_dnld_v3_offset = offset - nxpdev->fw_v3_offset_correction;
serdev_device_write_buf(nxpdev->serdev, nxpdev->fw->data +
nxpdev->fw_dnld_v3_offset, len);
Nothing checks that fw_dnld_v3_offset + len stays within nxpdev->fw->size,
so a controller that asks for an offset or length past the firmware image
makes the driver read past the end of nxpdev->fw->data and send that
memory back over UART.
nxp_recv_fw_req_v1() already bounds the same write. Add the equivalent
check to the v3 path, reject the request when it falls outside the firmware
image, and zero len on the error path so the fw_v3_prev_sent bookkeeping at
free_skb stays consistent. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: fix out-of-bounds read in the Traktor Kontrol S4 input parser
snd_usb_caiaq_tks4_dispatch() decodes the Traktor Kontrol S4 input
stream in fixed 16-byte (TKS4_MSGBLOCK_SIZE) message blocks. On every
iteration it advances buf and subtracts the block size while looping on
"while (len)".
len is urb->actual_length. That value is supplied by the device and is
not guaranteed to be a multiple of 16. When a final short block leaves
len between 1 and 15, the loop runs once more, reads up to buf[15], and
then does "len -= TKS4_MSGBLOCK_SIZE". As len is unsigned this underflows
to a huge value. The loop then keeps iterating and walking buf far past
the end of the 512-byte ep4_in_buf, reading out of bounds until a bogus
block id happens to be hit.
Iterate only while a full message block is available. This stops the
unsigned underflow and silently drops any trailing partial block, which
carries no complete control value anyway.
The sibling endpoint-4 parsers are not affected. The Traktor Kontrol X1
and Maschine arms in snd_usb_caiaq_ep4_reply_dispatch() floor
urb->actual_length before dispatching. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in iOS 26.6 and iPadOS 26.6, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6, watchOS 26.6. An app may be able to cause unexpected system termination. |
| An out-of-bounds read issue was addressed with improved input validation. This issue is fixed in iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6. A remote attacker may cause an unexpected app termination. |
| The issue was addressed with improved memory handling. This issue is fixed in iOS 26.6 and iPadOS 26.6, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6, watchOS 26.6. An attacker in physical proximity may be able to corrupt process memory. |
| The issue was addressed with improved memory handling. This issue is fixed in iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6, watchOS 26.6. Processing a maliciously crafted audio file may corrupt process memory. |
| In subsys/debug/coredump/coredump_shell.c, print_coredump_hdr() used the 16-bit tgt_code field of a stored Zephyr coredump header directly as an index into coredump_target_code2str[], a fixed 7-element array of string pointers, with no bounds check.
A stored coredump whose tgt_code is >= 7 causes an out-of-bounds read of a char* up to ~64K entries past the array; that value is passed as the %s argument to shell_print, which dereferences and walks it as a string. The result is either disclosure of device memory contents to the shell user or a crash when the out-of-bounds pointer is unmapped.
The defect is reached via the coredump print shell command (cmd_coredump_print_stored_dump -> pretty_print_coredump -> parse_and_print_coredump -> print_coredump_hdr). The tgt_code field is device-generated and in-range during normal crash handling, so triggering requires local shell access plus the ability to stage or corrupt the stored coredump in the flash/in-memory backend.
Introduced in v4.2.0 (commit 13abd7fe730) and present through v4.4.0; fixed by clamping out-of-range codes to the 'unknown' (index 0) entry. |
| A maliciously crafted DWG or DXF file, when parsed through Autodesk AutoCAD, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash or disclose sensitive information. |
| A maliciously crafted DWG or DXF file, when parsed through Autodesk AutoCAD, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash or disclose sensitive information. |
| Apache Traffic Server reads out of bounds while parsing DNS answers.
This issue affects Apache Traffic Server: from 8.0.0 through 8.1.9, from 9.0.0 through 9.2.14, from 10.0.0 through 10.1.3.
Users are recommended to upgrade to version 9.2.15 or 10.1.4, which fix the issue. |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_ssi_module module. This vulnerability may exist when the Server-Side Includes (SSI), proxy_pass, and proxy_buffering off directives are configured. With this configuration, an unauthenticated attacker with man-in-the-middle (MITM) ability to control responses from an upstream server may be able to cause a use-after-free in the NGINX worker process. This issue may lead to limited modification of memory or a restart of the NGINX worker process.
Impact:
This vulnerability may allow remote attackers to have limited control to modify memory contents or restart the NGINX worker process. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Fix CRC overread and double-free in iscsit_handle_text_cmd()
Two latent bugs in the Text-phase handler, both present since the
original LIO integration in commit e48354ce078c ("iscsi-target: Add
iSCSI fabric support for target v4.1"):
1) DataDigest CRC buffer overread (4 bytes past text_in).
text_in is kzalloc()'d at ALIGN(payload_length, 4). rx_size is then
incremented by ISCSI_CRC_LEN to make room for the received DataDigest
in the iovec, but the same (now-bumped) rx_size is passed as the
buffer length to iscsit_crc_buf():
if (conn->conn_ops->DataDigest) {
...
rx_size += ISCSI_CRC_LEN;
}
...
if (conn->conn_ops->DataDigest) {
data_crc = iscsit_crc_buf(text_in, rx_size, 0, NULL);
iscsit_crc_buf() walks rx_size bytes of text_in with crc32c(), so
when DataDigest is negotiated it reads 4 bytes past the end of the
text_in allocation. KASAN reproduces this directly on the unpatched
mainline tree as slab-out-of-bounds in crc32c() called from the Text
PDU path. The OOB bytes feed crc32c() and are then compared against
the initiator-supplied checksum, so the value does not flow back to
the attacker, but the kernel does read past the buffer on every Text
PDU with DataDigest=CRC32C.
Fix by passing the actual padded payload length
(ALIGN(payload_length, 4)) that was used for the kzalloc().
2) Stale cmd->text_in_ptr re-free (double-free) on ERL>0 bad DataDigest
drop.
On DataDigest mismatch with ErrorRecoveryLevel > 0 the handler
silently drops the PDU and lets the initiator plug the CmdSN gap:
kfree(text_in);
return 0;
cmd->text_in_ptr still points at the freed buffer. The next Text
Request on the same ITT re-enters iscsit_setup_text_cmd(), which
unconditionally does
kfree(cmd->text_in_ptr);
cmd->text_in_ptr = NULL;
freeing the same pointer a second time. Session teardown via
iscsit_release_cmd() has the same shape and hits the same double-free
if the connection is dropped before a second Text Request arrives.
On an unmodified mainline tree the bug-1 CRC overread fires first on
the initial valid Text Request and perturbs the subsequent state, so
#4 was isolated by building a kernel with only the bug-1 hunk of this
patch applied plus temporary printk() observability around the three
relevant kfree() sites. The observability prints are not part of
this patch. On that build, a three-PDU Text Request sequence after
login produces two back-to-back splats:
BUG: KASAN: double-free in iscsit_setup_text_cmd+0x??
BUG: KASAN: double-free in iscsit_release_cmd+0x??
showing the same pointer freed in the ERL>0 drop path and again in
iscsit_setup_text_cmd() (next Text Request on the same ITT) and once
more in iscsit_release_cmd() (session teardown). On distro kernels
with CONFIG_SLAB_FREELIST_HARDENED=y (default) the double-free
becomes a remote kernel BUG(); on non-hardened kernels it corrupts
the slab freelist.
Fix by clearing cmd->text_in_ptr after the kfree() in the ERL>0 drop
path. With both hunks applied #4 is directly observable on the stock
tree without observability printks; fixing bug-1 alone would mask #4
less, not more, so the hunks are submitted together.
Both fixes are one-liners. The Text PDU state machine is unchanged and
the wire protocol is unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: property: Reject dir_len < 4 to prevent size_t underflow
On the non-root path, __tb_property_parse_dir() takes dir_len from
entry->length (u16 widened to size_t). Two distinct OOB conditions
follow when entry->length < 4:
1. The non-root path begins with kmemdup(&block[dir_offset],
sizeof(*dir->uuid), ...) which always reads 4 dwords from
dir_offset. tb_property_entry_valid() only enforces
dir_offset + entry->length <= block_len, so a crafted entry
with dir_offset close to the end of the property block and
entry->length in 0..3 passes that gate but lets the UUID copy
run off the block (e.g. dir_offset = 497, dir_len = 3 in a
500-dword block reads block[497..501]).
2. After the kmemdup, content_len = dir_len - 4 underflows size_t
to ~SIZE_MAX, nentries becomes SIZE_MAX / 4, and the entry
walk runs OOB on each iteration until an entry fails
validation or the kernel oopses on an unmapped page.
Reject dir_len < 4 on the non-root path *before* the UUID kmemdup,
which closes both holes.
Also move INIT_LIST_HEAD(&dir->properties) up to immediately after
the dir allocation so the new error-return path (and the existing
uuid-alloc failure path) calling tb_property_free_dir() sees a
walkable list rather than the zero-initialized NULL next/prev that
list_for_each_entry_safe() would oops on. |
