| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: fix NULL pointer dereferences in nvmet_tcp_build_pdu_iovec
Commit efa56305908b ("nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length")
added ttag bounds checking and data_offset
validation in nvmet_tcp_handle_h2c_data_pdu(), but it did not validate
whether the command's data structures (cmd->req.sg and cmd->iov) have
been properly initialized before processing H2C_DATA PDUs.
The nvmet_tcp_build_pdu_iovec() function dereferences these pointers
without NULL checks. This can be triggered by sending H2C_DATA PDU
immediately after the ICREQ/ICRESP handshake, before
sending a CONNECT command or NVMe write command.
Attack vectors that trigger NULL pointer dereferences:
1. H2C_DATA PDU sent before CONNECT → both pointers NULL
2. H2C_DATA PDU for READ command → cmd->req.sg allocated, cmd->iov NULL
3. H2C_DATA PDU for uninitialized command slot → both pointers NULL
The fix validates both cmd->req.sg and cmd->iov before calling
nvmet_tcp_build_pdu_iovec(). Both checks are required because:
- Uninitialized commands: both NULL
- READ commands: cmd->req.sg allocated, cmd->iov NULL
- WRITE commands: both allocated |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix refcount bug and potential UAF in perf_mmap
Syzkaller reported a refcount_t: addition on 0; use-after-free warning
in perf_mmap.
The issue is caused by a race condition between a failing mmap() setup
and a concurrent mmap() on a dependent event (e.g., using output
redirection).
In perf_mmap(), the ring_buffer (rb) is allocated and assigned to
event->rb with the mmap_mutex held. The mutex is then released to
perform map_range().
If map_range() fails, perf_mmap_close() is called to clean up.
However, since the mutex was dropped, another thread attaching to
this event (via inherited events or output redirection) can acquire
the mutex, observe the valid event->rb pointer, and attempt to
increment its reference count. If the cleanup path has already
dropped the reference count to zero, this results in a
use-after-free or refcount saturation warning.
Fix this by extending the scope of mmap_mutex to cover the
map_range() call. This ensures that the ring buffer initialization
and mapping (or cleanup on failure) happens atomically effectively,
preventing other threads from accessing a half-initialized or
dying ring buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: ntfs3: fix infinite loop triggered by zero-sized ATTR_LIST
We found an infinite loop bug in the ntfs3 file system that can lead to a
Denial-of-Service (DoS) condition.
A malformed NTFS image can cause an infinite loop when an ATTR_LIST attribute
indicates a zero data size while the driver allocates memory for it.
When ntfs_load_attr_list() processes a resident ATTR_LIST with data_size set
to zero, it still allocates memory because of al_aligned(0). This creates an
inconsistent state where ni->attr_list.size is zero, but ni->attr_list.le is
non-null. This causes ni_enum_attr_ex to incorrectly assume that no attribute
list exists and enumerates only the primary MFT record. When it finds
ATTR_LIST, the code reloads it and restarts the enumeration, repeating
indefinitely. The mount operation never completes, hanging the kernel thread.
This patch adds validation to ensure that data_size is non-zero before memory
allocation. When a zero-sized ATTR_LIST is detected, the function returns
-EINVAL, preventing a DoS vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: ntfs3: check return value of indx_find to avoid infinite loop
We found an infinite loop bug in the ntfs3 file system that can lead to a
Denial-of-Service (DoS) condition.
A malformed dentry in the ntfs3 filesystem can cause the kernel to hang
during the lookup operations. By setting the HAS_SUB_NODE flag in an
INDEX_ENTRY within a directory's INDEX_ALLOCATION block and manipulating the
VCN pointer, an attacker can cause the indx_find() function to repeatedly
read the same block, allocating 4 KB of memory each time. The kernel lacks
VCN loop detection and depth limits, causing memory exhaustion and an OOM
crash.
This patch adds a return value check for fnd_push() to prevent a memory
exhaustion vulnerability caused by infinite loops. When the index exceeds the
size of the fnd->nodes array, fnd_push() returns -EINVAL. The indx_find()
function checks this return value and stops processing, preventing further
memory allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: ntfs3: fix infinite loop in attr_load_runs_range on inconsistent metadata
We found an infinite loop bug in the ntfs3 file system that can lead to a
Denial-of-Service (DoS) condition.
A malformed NTFS image can cause an infinite loop when an attribute header
indicates an empty run list, while directory entries reference it as
containing actual data. In NTFS, setting evcn=-1 with svcn=0 is a valid way
to represent an empty run list, and run_unpack() correctly handles this by
checking if evcn + 1 equals svcn and returning early without parsing any run
data. However, this creates a problem when there is metadata inconsistency,
where the attribute header claims to be empty (evcn=-1) but the caller
expects to read actual data. When run_unpack() immediately returns success
upon seeing this condition, it leaves the runs_tree uninitialized with
run->runs as a NULL. The calling function attr_load_runs_range() assumes
that a successful return means that the runs were loaded and sets clen to 0,
expecting the next run_lookup_entry() call to succeed. Because runs_tree
remains uninitialized, run_lookup_entry() continues to fail, and the loop
increments vcn by zero (vcn += 0), leading to an infinite loop.
This patch adds a retry counter to detect when run_lookup_entry() fails
consecutively after attr_load_runs_vcn(). If the run is still not found on
the second attempt, it indicates corrupted metadata and returns -EINVAL,
preventing the Denial-of-Service (DoS) vulnerability. |
| Jenkins LoadNinja Plugin 2.1 and earlier does not mask LoadNinja API keys displayed on the job configuration form, increasing the potential for attackers to observe and capture them. |
| Jenkins LoadNinja Plugin 2.1 and earlier stores LoadNinja API keys unencrypted in job config.xml files on the Jenkins controller where they can be viewed by users with Item/Extended Read permission or access to the Jenkins controller file system. |
| Jenkins 2.442 through 2.554 (both inclusive), LTS 2.426.3 through LTS 2.541.2 (both inclusive) performs origin validation of requests made through the CLI WebSocket endpoint by computing the expected origin for comparison using the Host or X-Forwarded-Host HTTP request headers, making it vulnerable to DNS rebinding attacks that allow bypassing origin validation. |
| The KiviCare – Clinic & Patient Management System (EHR) plugin for WordPress is vulnerable to Privilege Escalation due to missing authorization on the `/wp-json/kivicare/v1/setup-wizard/clinic` REST API endpoint in all versions up to, and including, 4.1.2. This makes it possible for unauthenticated attackers to create a new clinic and a WordPress user with clinic admin privileges. |
| The KiviCare – Clinic & Patient Management System (EHR) plugin for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 4.1.2. This is due to the `patientSocialLogin()` function not verifying the social provider access token before authenticating a user. This makes it possible for unauthenticated attackers to log in as any patient registered on the system by providing only their email address and an arbitrary value for the access token, bypassing all credential verification. The attacker gains access to sensitive medical records, appointments, prescriptions, and billing information (PII/PHI breach). Additionally, authentication cookies are set before the role check, meaning the auth cookies for non-patient users (including administrators) are also set in the HTTP response headers, even though a 403 response is returned. |
| When a plugin is installed using the Arturia Software Center (MacOS), it also installs an uninstall.sh bash script in a root owned path. This script is written to disk with the file permissions 777, meaning it is writable by any user. When uninstalling a plugin via the Arturia Software Center the Privileged Helper gets instructed to execute this script. When the bash script is manipulated by an attacker this scenario will lead to privilege escalation. |
| The "Privileged Helper" component of the Arturia Software Center (MacOS) does not perform sufficient client code signature validation when a client connects. This leads to an attacker being able to connect to the helper and execute privileged actions leading to local privilege escalation. |
| A JSONPath injection vulnerability in Spring AI's AbstractFilterExpressionConverter allows authenticated users to bypass metadata-based access controls through crafted filter expressions. User-controlled input passed to FilterExpressionBuilder is concatenated into JSONPath queries without proper escaping, enabling attackers to inject arbitrary JSONPath logic and access unauthorized documents.
This vulnerability affects applications using vector stores that extend AbstractFilterExpressionConverter for multi-tenant isolation, role-based access control, or document filtering based on metadata.
The vulnerability occurs when user-supplied values in filter expressions are not escaped before being inserted into JSONPath queries. Special characters like ", ||, and && are passed through unescaped, allowing injection of arbitrary JSONPath logic that can alter the intended query semantics. |
| A flaw was found in Hibernate. A remote attacker with low privileges could exploit a second-order SQL injection vulnerability by providing specially crafted, unsanitized non-alphanumeric characters in the ID column when the InlineIdsOrClauseBuilder is used. This could lead to sensitive information disclosure, such as reading system files, and allow for data manipulation or deletion within the application's database, resulting in an application level denial of service. |
| A flaw was found in Undertow where malformed client requests can trigger server-side stream resets without triggering abuse counters. This issue, referred to as the "MadeYouReset" attack, allows malicious clients to induce excessive server workload by repeatedly causing server-side stream aborts. While not a protocol bug, this highlights a common implementation weakness that can be exploited to cause a denial of service (DoS). |
| Mura before 10.1.14 allows beanFeed.cfc getQuery sortDirection SQL injection. |
| There is a Stack overflow Vulnerability in the device Search and Discovery feature of Hikvision Access Control Products. If exploited, an attacker on the same local area network (LAN) could cause the device to malfunction by sending specially crafted packets to an unpatched device. |
| MuraCMS through 10.1.10 contains a CSRF vulnerability that allows attackers to permanently destroy all deleted content stored in the trash system through a simple CSRF attack. The vulnerable cTrash.empty function lacks CSRF token validation, enabling malicious websites to forge requests that irreversibly delete all trashed content when an authenticated administrator visits a crated webpage. Successful exploitation of the CSRF vulnerability results in potentially catastrophic data loss within the MuraCMS system. When an authenticated administrator visits a malicious page containing the CSRF exploit, their browser automatically submits a hidden form that permanently empties the entire trash system without any validation, confirmation dialog, or user consent. |
| The update address CSRF vulnerability in MuraCMS through 10.1.10 allows attackers to manipulate user address information through CSRF. The vulnerable cUsers.updateAddress function lacks CSRF token validation, enabling malicious websites to forge requests that add, modify, or delete user addresses when an authenticated administrator visits a crafted webpage. Successful exploitation of the update address CSRF vulnerability results in unauthorized manipulation of user address information within the MuraCMS system, potentially compromising user data integrity and organizational communications. When an authenticated administrator visits a malicious webpage containing the CSRF exploit, their browser automatically submits a hidden form that can add malicious addresses with attacker-controlled email addresses and phone numbers, update existing addresses to redirect communications to attacker-controlled locations or deleted legitimate address records to disrupt business operations. This can lead to misdirected sensitive communications, compromise of user privacy through injection of attacker contact information, disruption of legitimate business correspondence, and potential social engineering attacks via the corrupted address data. |
| The Trash Restore CSRF vulnerability in MuraCMS through 10.1.10 allows attackers to restore deleted content from the trash to unauthorized locations through CSRF. The vulnerable cTrash.restore function lacks CSRF token validation, enabling malicious websites to forge requests that restore content to arbitrary parent locations when an authenticated administrator visits a crafted webpage. Successful exploitation of the Trash Restore CSRF vulnerability results in unauthorized restoration of deleted content to potentially inappropriate or malicious locations within the MuraCMS website structure. When an authenticated administrator visits a malicious webpage containing the CSRF exploit, their browser automatically submits a hidden form that restores specified content from the trash to a location determined by the attacker through the parentid parameter. This can lead to restoration of previously deleted malicious content, placement of sensitive documents in public areas, manipulation of website navigation structure, or restoration of outdated content that was intentionally removed for security or compliance reasons. |
