| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
misc: ibmasm: fix OOB MMIO read in ibmasm_handle_mouse_interrupt()
ibmasm_handle_mouse_interrupt() performs an out-of-bounds MMIO read
when the queue reader or writer index from hardware exceeds
REMOTE_QUEUE_SIZE (60).
A compromised service processor can trigger this by writing an
out-of-range value to the reader or writer MMIO register before
asserting an interrupt. Since writer is re-read from hardware on
every loop iteration, it can also be set to an out-of-range value
after the loop has already started.
The root cause is that get_queue_reader() and get_queue_writer() return
raw readl() values that are passed directly into get_queue_entry(),
which computes:
queue_begin + reader * sizeof(struct remote_input)
with no bounds check. This unchecked MMIO address is then passed to
memcpy_fromio(), reading 8 bytes from unintended device registers.
For sufficiently large values the address falls outside the PCI BAR
mapping entirely, triggering a machine check exception.
Fix by checking both indices against REMOTE_QUEUE_SIZE at the top of
the loop body, before any call to get_queue_entry(). On an out-of-range
value, reset the reader register to 0 via set_queue_reader() before
breaking, so that normal queue operation can resume if the corrupted
hardware state is transient. |
| In the Linux kernel, the following vulnerability has been resolved:
dm mirror: fix integer overflow in create_dirty_log()
The argument count calculation in create_dirty_log() performs
`*args_used = 2 + param_count` before validating against argc. When a
user provides a param_count close to UINT_MAX via the device mapper
table string, this unsigned addition wraps around to a small value,
causing the subsequent `argc < *args_used` check to be bypassed.
The overflowed param_count is then passed as argc to dm_dirty_log_create(),
where it can cause out-of-bounds reads on the argv array.
Fix by comparing param_count against argc - 2 before performing the
addition, following the same pattern used by parse_features() in the
same file. Since argc >= 2 is already guaranteed, the subtraction is
safe. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: ns: Limit the maximum number of lookups
Current code does no bound checking on the number of lookups a client can
perform. Though the code restricts the lookups to local clients, there is
still a possibility of a malicious local client sending a flood of
NEW_LOOKUP messages over the same socket.
Fix this issue by limiting the maximum number of lookups to 64 globally.
Since the nameserver allows only atmost one local observer, this global
lookup count will ensure that the lookups stay within the limit.
Note that, limit of 64 is chosen based on the current platform
requirements. If requirement changes in the future, this limit can be
increased. |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/versalnet: Fix device_node leak in mc_probe()
of_parse_phandle() returns a device_node reference that must be released with
of_node_put(). The original code never freed r5_core_node on any exit path,
causing a memory leak.
Fix this by using the automatic cleanup attribute __free(device_node) which
ensures of_node_put() is called when the variable goes out of scope. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Triple fault if restore host CR3 fails on nested #VMEXIT
If loading L1's CR3 fails on a nested #VMEXIT, nested_svm_vmexit()
returns an error code that is ignored by most callers, and continues to
run L1 with corrupted state. A sane recovery is not possible in this
case, and HW behavior is to cause a shutdown. Inject a triple fault
instead, and do not return early from nested_svm_vmexit(). Continue
cleaning up the vCPU state (e.g. clear pending exceptions), to handle
the failure as gracefully as possible.
From the APM:
Upon #VMEXIT, the processor performs the following actions in order to
return to the host execution context:
...
if (illegal host state loaded, or exception while loading host state)
shutdown
else
execute first host instruction following the VMRUN
Remove the return value of nested_svm_vmexit(), which is mostly
unchecked anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/cdx: Fix NULL pointer dereference in interrupt trigger path
Add validation to ensure MSI is configured before accessing cdx_irqs
array in vfio_cdx_set_msi_trigger(). Without this check, userspace
can trigger a NULL pointer dereference by calling VFIO_DEVICE_SET_IRQS
with VFIO_IRQ_SET_DATA_BOOL or VFIO_IRQ_SET_DATA_NONE flags before
ever setting up interrupts via VFIO_IRQ_SET_DATA_EVENTFD.
The vfio_cdx_msi_enable() function allocates the cdx_irqs array and
sets config_msi to 1 only when called through the EVENTFD path. The
trigger loop (for DATA_BOOL/DATA_NONE) assumed this had already been
done, but there was no enforcement of this call ordering.
This matches the protection used in the PCI VFIO driver where
vfio_pci_set_msi_trigger() checks irq_is() before the trigger loop. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi:ssif: Clean up kthread on errors
If an error occurs after the ssif kthread is created, but before the
main IPMI code starts the ssif interface, the ssif kthread will not
be stopped.
So make sure the kthread is stopped on an error condition if it is
running. |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-llbitmap: skip reading rdevs that are not in_sync
When reading bitmap pages from member disks, the code iterates through
all rdevs and attempts to read from the first available one. However,
it only checks for raid_disk assignment and Faulty flag, missing the
In_sync flag check.
This can cause bitmap data to be read from spare disks that are still
being rebuilt and don't have valid bitmap information yet. Reading
stale or uninitialized bitmap data from such disks can lead to
incorrect dirty bit tracking, potentially causing data corruption
during recovery or normal operation.
Add the In_sync flag check to ensure bitmap pages are only read from
fully synchronized member disks that have valid bitmap data. |
| Budibase is an open-source low-code platform. Prior to 3.38.2, the public API role unassignment endpoint (POST /api/public/v1/roles/unassign) updates user documents in CouchDB but does not invalidate the corresponding Redis user cache entries. Because the authentication middleware resolves user identity and permissions from this cache (TTL: 3600 seconds), a user whose admin, builder, or app-level roles have been revoked via the public API retains those privileges for up to 1 hour. This vulnerability is fixed in 3.38.2. |
| Budibase is an open-source low-code platform. Prior to 3.38.1, the V1 Views API (POST /api/views) accepts a calculation parameter from the request body that is interpolated directly into a CouchDB reduce function definition without validation. Although an internal SCHEMA_MAP object defines the valid calculation types (sum, count, stats), no actual validation is performed against this map before the value is used in string interpolation. A user with Builder permissions can inject arbitrary JavaScript code that will be executed within the CouchDB JavaScript engine when the view is queried. This vulnerability is fixed in 3.38.1. |
| Budibase is an open-source low-code platform. Prior to 3.38.1, Budibase exposes a REST API for datasource management. The route PUT /api/datasources/:datasourceId is registered in the authorizedRoutes group with TABLE/READ permission. This is the same authorization level as the read endpoint (GET /api/datasources/:datasourceId). Every authenticated Budibase app user with the BASIC built-in role or higher carries TABLE/WRITE (and therefore TABLE/READ) permissions, and the datasource update controller performs no additional builder check. As a result, any authenticated non-builder app user can submit a PUT request to rewrite a datasource's config object — including the connection host, port, database credentials, or the base url of a REST datasource. Because no network-level SSRF protection is applied to SQL driver connections, redirecting a PostgreSQL/MySQL/MongoDB datasource to an internal IP address succeeds and the attacker can probe or interact with internal services on arbitrary ports. This vulnerability is fixed in 3.38.1. |
| Budibase is an open-source low-code platform. Prior to 3.38.1, the REST datasource integration (packages/server/src/integrations/rest.ts) follows HTTP redirects without re-checking the IP blacklist, allowing an authenticated Builder to access internal services (cloud metadata, databases) by redirecting through an attacker-controlled server. This vulnerability is fixed in 3.38.1. |
| Budibase is an open-source low-code platform. Prior to 3.34.8, the processUrlFile function in packages/server/src/automations/steps/ai/extract.ts uses fetch(fileUrl) directly without the IP blacklist validation that is consistently applied to all other automation steps. This allows an authenticated user to trigger server-side requests to internal network addresses. This vulnerability is fixed in 3.34.8. |
| Budibase is an open-source low-code platform. Prior to 3.35.3, the VectorDB configuration endpoint in Budibase accepts a host parameter that undergoes no validation against internal IP ranges, reserved hostnames, or URL schemes. Any authenticated user with builder-level access can supply an arbitrary host value such as 169.254.169.254 or localhost, causing the server to initiate outbound TCP connections to internal network addresses or cloud metadata endpoints on their behalf.This vulnerability is fixed in 3.35.3. |
| Frappe HR is an open-source human resources management solution (HRMS). Prior to 16.5.0, authenticated employees could access other employees’ leave details due to improper authorization checks. This vulnerability is fixed in 16.5.0. |
| BentoML is a Python library for building online serving systems optimized for AI apps and model inference. Prior to 1.4.39, a malicious bentofile.yaml containing a newline-injected value in envs[*].name produces unquoted RUN directives in the BentoML-generated Dockerfile. When the victim runs bentoml containerize on the imported bento, those RUN directives execute on the host during docker build. This vulnerability is fixed in 1.4.39. |
| Kysely is a type-safe TypeScript SQL query builder. From 0.26.0 to 0.28.16, DefaultQueryCompiler.visitJSONPathLeg does not escape JSON-path metacharacters (., [, ], *, **, ?). When attacker-controlled input flows into eb.ref(col, '->$').key(input) or .at(input) — including type-safe code where the JSON column is shaped like Record<string, T> so K extends string is the inferred type — every dot becomes a path-leg separator, letting an attacker traverse from the intended key into sibling and child fields the developer never meant to expose. The result is read access (and, in update statements, write access) to JSON sub-fields outside the intended scope across MySQL, PostgreSQL ->$/->>$, and SQLite. This vulnerability is fixed in 0.28.17. |
| FacturaScripts is an open source accounting and invoicing software. In 2025.81 and earlier, an authenticated unrestricted file upload vulnerability exists in FacturaScripts' product image upload functionality. An attacker with valid credentials can upload a PHP file disguised as a GIF image (using a GIF89a header), bypassing MIME type validation. The file is stored with its original extension, including executable extensions such as .php. The vulnerability exists the addImageAction() method of Core/Lib/ExtendedController/ProductImagesTrait.php. |
| RELATE is a web-based courseware package. Versions prior to commit 555f0efb1c5bd7531c07cd73724d7e566a81f620 have a stored cross-site scripting vulnerability that allows any enrolled student to execute arbitrary JavaScript in an administrator's browser session, potentially leading to full admin account takeover. The `get_user()` method in `ParticipationAdmin` renders user-controlled input using `mark_safe` combined with Python's % string formatting. This bypasses Django\'s automatic HTML escaping entirely. The value returned by `get_full_name` is derived directly from the `first_name` and `last_name` fields of the User model. These fields are freely editable by any authenticated user through the profile page (`/profile/`) with no sanitization applied. When an admin views the Participation list in the Django admin panel, the unsanitized value is rendered directly into the HTML response, causing the injected script to execute in the admin's browser. Commit 555f0efb1c5bd7531c07cd73724d7e566a81f620 fixes the issue. |
| RELATE is a web-based courseware package. Prior to commit d66ba5659b459bf1ba56b7109b5f9ecf197cbefb, RELATE LMS configures its Celery workers to accept and deserialize untrusted 'pickle' data. An attacker who can reach the message broker can execute arbitrary commands on the host server. Combined with missing network isolation in the code execution sandbox, this allows an authenticated student to achieve full Remote Code Execution (RCE) on the host system. Commit d66ba5659b459bf1ba56b7109b5f9ecf197cbefb fixes the issue. |
