| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: aqc111: Do not perform PM inside suspend callback
syzbot reports "task hung in rpm_resume"
This is caused by aqc111_suspend calling
the PM variant of its write_cmd routine.
The simplified call trace looks like this:
rpm_suspend()
usb_suspend_both() - here udev->dev.power.runtime_status == RPM_SUSPENDING
aqc111_suspend() - called for the usb device interface
aqc111_write32_cmd()
usb_autopm_get_interface()
pm_runtime_resume_and_get()
rpm_resume() - here we call rpm_resume() on our parent
rpm_resume() - Here we wait for a status change that will never happen.
At this point we block another task which holds
rtnl_lock and locks up the whole networking stack.
Fix this by replacing the write_cmd calls with their _nopm variants |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: processor: Fix previous acpi_processor_errata_piix4() fix
After commi f132e089fe89 ("ACPI: processor: Fix NULL-pointer dereference
in acpi_processor_errata_piix4()"), device pointers may be dereferenced
after dropping references to the device objects pointed to by them,
which may cause a use-after-free to occur.
Moreover, debug messages about enabling the errata may be printed
if the errata flags corresponding to them are unset.
Address all of these issues by moving message printing to the points
in the code where the errata flags are set. |
| In the Linux kernel, the following vulnerability has been resolved:
udp_tunnel: fix NULL deref caused by udp_sock_create6 when CONFIG_IPV6=n
When CONFIG_IPV6 is disabled, the udp_sock_create6() function returns 0
(success) without actually creating a socket. Callers such as
fou_create() then proceed to dereference the uninitialized socket
pointer, resulting in a NULL pointer dereference.
The captured NULL deref crash:
BUG: kernel NULL pointer dereference, address: 0000000000000018
RIP: 0010:fou_nl_add_doit (net/ipv4/fou_core.c:590 net/ipv4/fou_core.c:764)
[...]
Call Trace:
<TASK>
genl_family_rcv_msg_doit.constprop.0 (net/netlink/genetlink.c:1114)
genl_rcv_msg (net/netlink/genetlink.c:1194 net/netlink/genetlink.c:1209)
[...]
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
genl_rcv (net/netlink/genetlink.c:1219)
netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sock_sendmsg (net/socket.c:727 (discriminator 1) net/socket.c:742 (discriminator 1))
__sys_sendto (./include/linux/file.h:62 (discriminator 1) ./include/linux/file.h:83 (discriminator 1) net/socket.c:2183 (discriminator 1))
__x64_sys_sendto (net/socket.c:2213 (discriminator 1) net/socket.c:2209 (discriminator 1) net/socket.c:2209 (discriminator 1))
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (net/arch/x86/entry/entry_64.S:130)
This patch makes udp_sock_create6 return -EPFNOSUPPORT instead, so
callers correctly take their error paths. There is only one caller of
the vulnerable function and only privileged users can trigger it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: guard flow control update with global_tx_fc in buffer switching
mvpp2_bm_switch_buffers() unconditionally calls
mvpp2_bm_pool_update_priv_fc() when switching between per-cpu and
shared buffer pool modes. This function programs CM3 flow control
registers via mvpp2_cm3_read()/mvpp2_cm3_write(), which dereference
priv->cm3_base without any NULL check.
When the CM3 SRAM resource is not present in the device tree (the
third reg entry added by commit 60523583b07c ("dts: marvell: add CM3
SRAM memory to cp11x ethernet device tree")), priv->cm3_base remains
NULL and priv->global_tx_fc is false. Any operation that triggers
mvpp2_bm_switch_buffers(), for example an MTU change that crosses
the jumbo frame threshold, will crash:
Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000000
Mem abort info:
ESR = 0x0000000096000006
EC = 0x25: DABT (current EL), IL = 32 bits
pc : readl+0x0/0x18
lr : mvpp2_cm3_read.isra.0+0x14/0x20
Call trace:
readl+0x0/0x18
mvpp2_bm_pool_update_fc+0x40/0x12c
mvpp2_bm_pool_update_priv_fc+0x94/0xd8
mvpp2_bm_switch_buffers.isra.0+0x80/0x1c0
mvpp2_change_mtu+0x140/0x380
__dev_set_mtu+0x1c/0x38
dev_set_mtu_ext+0x78/0x118
dev_set_mtu+0x48/0xa8
dev_ifsioc+0x21c/0x43c
dev_ioctl+0x2d8/0x42c
sock_ioctl+0x314/0x378
Every other flow control call site in the driver already guards
hardware access with either priv->global_tx_fc or port->tx_fc.
mvpp2_bm_switch_buffers() is the only place that omits this check.
Add the missing priv->global_tx_fc guard to both the disable and
re-enable calls in mvpp2_bm_switch_buffers(), consistent with the
rest of the driver. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: serialize lock/unlock against other NAND operations
nand_lock() and nand_unlock() call into chip->ops.lock_area/unlock_area
without holding the NAND device lock. On controllers that implement
SET_FEATURES via multiple low-level PIO commands, these can race with
concurrent UBI/UBIFS background erase/write operations that hold the
device lock, resulting in cmd_pending conflicts on the NAND controller.
Add nand_get_device()/nand_release_device() around the lock/unlock
operations to serialize them against all other NAND controller access. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free of share_conf in compound request
smb2_get_ksmbd_tcon() reuses work->tcon in compound requests without
validating tcon->t_state. ksmbd_tree_conn_lookup() checks t_state ==
TREE_CONNECTED on the initial lookup path, but the compound reuse path
bypasses this check entirely.
If a prior command in the compound (SMB2_TREE_DISCONNECT) sets t_state
to TREE_DISCONNECTED and frees share_conf via ksmbd_share_config_put(),
subsequent commands dereference the freed share_conf through
work->tcon->share_conf.
KASAN report:
[ 4.144653] ==================================================================
[ 4.145059] BUG: KASAN: slab-use-after-free in smb2_write+0xc74/0xe70
[ 4.145415] Read of size 4 at addr ffff88810430c194 by task kworker/1:1/44
[ 4.145772]
[ 4.145867] CPU: 1 UID: 0 PID: 44 Comm: kworker/1:1 Not tainted 7.0.0-rc3+ #60 PREEMPTLAZY
[ 4.145871] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 4.145875] Workqueue: ksmbd-io handle_ksmbd_work
[ 4.145888] Call Trace:
[ 4.145892] <TASK>
[ 4.145894] dump_stack_lvl+0x64/0x80
[ 4.145910] print_report+0xce/0x660
[ 4.145919] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 4.145928] ? smb2_write+0xc74/0xe70
[ 4.145931] kasan_report+0xce/0x100
[ 4.145934] ? smb2_write+0xc74/0xe70
[ 4.145937] smb2_write+0xc74/0xe70
[ 4.145939] ? __pfx_smb2_write+0x10/0x10
[ 4.145942] ? _raw_spin_unlock+0xe/0x30
[ 4.145945] ? ksmbd_smb2_check_message+0xeb2/0x24c0
[ 4.145948] ? smb2_tree_disconnect+0x31c/0x480
[ 4.145951] handle_ksmbd_work+0x40f/0x1080
[ 4.145953] process_one_work+0x5fa/0xef0
[ 4.145962] ? assign_work+0x122/0x3e0
[ 4.145964] worker_thread+0x54b/0xf70
[ 4.145967] ? __pfx_worker_thread+0x10/0x10
[ 4.145970] kthread+0x346/0x470
[ 4.145976] ? recalc_sigpending+0x19b/0x230
[ 4.145980] ? __pfx_kthread+0x10/0x10
[ 4.145984] ret_from_fork+0x4fb/0x6c0
[ 4.145992] ? __pfx_ret_from_fork+0x10/0x10
[ 4.145995] ? __switch_to+0x36c/0xbe0
[ 4.145999] ? __pfx_kthread+0x10/0x10
[ 4.146003] ret_from_fork_asm+0x1a/0x30
[ 4.146013] </TASK>
[ 4.146014]
[ 4.149858] Allocated by task 44:
[ 4.149953] kasan_save_stack+0x33/0x60
[ 4.150061] kasan_save_track+0x14/0x30
[ 4.150169] __kasan_kmalloc+0x8f/0xa0
[ 4.150274] ksmbd_share_config_get+0x1dd/0xdd0
[ 4.150401] ksmbd_tree_conn_connect+0x7e/0x600
[ 4.150529] smb2_tree_connect+0x2e6/0x1000
[ 4.150645] handle_ksmbd_work+0x40f/0x1080
[ 4.150761] process_one_work+0x5fa/0xef0
[ 4.150873] worker_thread+0x54b/0xf70
[ 4.150978] kthread+0x346/0x470
[ 4.151071] ret_from_fork+0x4fb/0x6c0
[ 4.151176] ret_from_fork_asm+0x1a/0x30
[ 4.151286]
[ 4.151332] Freed by task 44:
[ 4.151418] kasan_save_stack+0x33/0x60
[ 4.151526] kasan_save_track+0x14/0x30
[ 4.151634] kasan_save_free_info+0x3b/0x60
[ 4.151751] __kasan_slab_free+0x43/0x70
[ 4.151861] kfree+0x1ca/0x430
[ 4.151952] __ksmbd_tree_conn_disconnect+0xc8/0x190
[ 4.152088] smb2_tree_disconnect+0x1cd/0x480
[ 4.152211] handle_ksmbd_work+0x40f/0x1080
[ 4.152326] process_one_work+0x5fa/0xef0
[ 4.152438] worker_thread+0x54b/0xf70
[ 4.152545] kthread+0x346/0x470
[ 4.152638] ret_from_fork+0x4fb/0x6c0
[ 4.152743] ret_from_fork_asm+0x1a/0x30
[ 4.152853]
[ 4.152900] The buggy address belongs to the object at ffff88810430c180
[ 4.152900] which belongs to the cache kmalloc-96 of size 96
[ 4.153226] The buggy address is located 20 bytes inside of
[ 4.153226] freed 96-byte region [ffff88810430c180, ffff88810430c1e0)
[ 4.153549]
[ 4.153596] The buggy address belongs to the physical page:
[ 4.153750] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff88810430ce80 pfn:0x10430c
[ 4.154000] flags: 0x
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: Fix interrupt storm after receiving bad if_id in IRQ handler
Commit 31a7a0bbeb00 ("dpaa2-switch: add bounds check for if_id in IRQ
handler") introduces a range check for if_id to avoid an out-of-bounds
access. If an out-of-bounds if_id is detected, the interrupt status is
not cleared. This may result in an interrupt storm.
Clear the interrupt status after detecting an out-of-bounds if_id to avoid
the problem.
Found by an experimental AI code review agent at Google. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wlcore: Fix a locking bug
Make sure that wl->mutex is locked before it is unlocked. This has been
detected by the Clang thread-safety analyzer. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix race between freeing data and fs accessing it
AppArmor was putting the reference to i_private data on its end after
removing the original entry from the file system. However the inode
can aand does live beyond that point and it is possible that some of
the fs call back functions will be invoked after the reference has
been put, which results in a race between freeing the data and
accessing it through the fs.
While the rawdata/loaddata is the most likely candidate to fail the
race, as it has the fewest references. If properly crafted it might be
possible to trigger a race for the other types stored in i_private.
Fix this by moving the put of i_private referenced data to the correct
place which is during inode eviction. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix race on rawdata dereference
There is a race condition that leads to a use-after-free situation:
because the rawdata inodes are not refcounted, an attacker can start
open()ing one of the rawdata files, and at the same time remove the
last reference to this rawdata (by removing the corresponding profile,
for example), which frees its struct aa_loaddata; as a result, when
seq_rawdata_open() is reached, i_private is a dangling pointer and
freed memory is accessed.
The rawdata inodes weren't refcounted to avoid a circular refcount and
were supposed to be held by the profile rawdata reference. However
during profile removal there is a window where the vfs and profile
destruction race, resulting in the use after free.
Fix this by moving to a double refcount scheme. Where the profile
refcount on rawdata is used to break the circular dependency. Allowing
for freeing of the rawdata once all inode references to the rawdata
are put. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix differential encoding verification
Differential encoding allows loops to be created if it is abused. To
prevent this the unpack should verify that a diff-encode chain
terminates.
Unfortunately the differential encode verification had two bugs.
1. it conflated states that had gone through check and already been
marked, with states that were currently being checked and marked.
This means that loops in the current chain being verified are treated
as a chain that has already been verified.
2. the order bailout on already checked states compared current chain
check iterators j,k instead of using the outer loop iterator i.
Meaning a step backwards in states in the current chain verification
was being mistaken for moving to an already verified state.
Move to a double mark scheme where already verified states get a
different mark, than the current chain being kept. This enables us
to also drop the backwards verification check that was the cause of
the second error as any already verified state is already marked. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: Fix double free of ns_name in aa_replace_profiles()
if ns_name is NULL after
1071 error = aa_unpack(udata, &lh, &ns_name);
and if ent->ns_name contains an ns_name in
1089 } else if (ent->ns_name) {
then ns_name is assigned the ent->ns_name
1095 ns_name = ent->ns_name;
however ent->ns_name is freed at
1262 aa_load_ent_free(ent);
and then again when freeing ns_name at
1270 kfree(ns_name);
Fix this by NULLing out ent->ns_name after it is transferred to ns_name
") |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix missing bounds check on DEFAULT table in verify_dfa()
The verify_dfa() function only checks DEFAULT_TABLE bounds when the state
is not differentially encoded.
When the verification loop traverses the differential encoding chain,
it reads k = DEFAULT_TABLE[j] and uses k as an array index without
validation. A malformed DFA with DEFAULT_TABLE[j] >= state_count,
therefore, causes both out-of-bounds reads and writes.
[ 57.179855] ==================================================================
[ 57.180549] BUG: KASAN: slab-out-of-bounds in verify_dfa+0x59a/0x660
[ 57.180904] Read of size 4 at addr ffff888100eadec4 by task su/993
[ 57.181554] CPU: 1 UID: 0 PID: 993 Comm: su Not tainted 6.19.0-rc7-next-20260127 #1 PREEMPT(lazy)
[ 57.181558] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 57.181563] Call Trace:
[ 57.181572] <TASK>
[ 57.181577] dump_stack_lvl+0x5e/0x80
[ 57.181596] print_report+0xc8/0x270
[ 57.181605] ? verify_dfa+0x59a/0x660
[ 57.181608] kasan_report+0x118/0x150
[ 57.181620] ? verify_dfa+0x59a/0x660
[ 57.181623] verify_dfa+0x59a/0x660
[ 57.181627] aa_dfa_unpack+0x1610/0x1740
[ 57.181629] ? __kmalloc_cache_noprof+0x1d0/0x470
[ 57.181640] unpack_pdb+0x86d/0x46b0
[ 57.181647] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181653] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181656] ? aa_unpack_nameX+0x1a8/0x300
[ 57.181659] aa_unpack+0x20b0/0x4c30
[ 57.181662] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181664] ? stack_depot_save_flags+0x33/0x700
[ 57.181681] ? kasan_save_track+0x4f/0x80
[ 57.181683] ? kasan_save_track+0x3e/0x80
[ 57.181686] ? __kasan_kmalloc+0x93/0xb0
[ 57.181688] ? __kvmalloc_node_noprof+0x44a/0x780
[ 57.181693] ? aa_simple_write_to_buffer+0x54/0x130
[ 57.181697] ? policy_update+0x154/0x330
[ 57.181704] aa_replace_profiles+0x15a/0x1dd0
[ 57.181707] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181710] ? __kvmalloc_node_noprof+0x44a/0x780
[ 57.181712] ? aa_loaddata_alloc+0x77/0x140
[ 57.181715] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181717] ? _copy_from_user+0x2a/0x70
[ 57.181730] policy_update+0x17a/0x330
[ 57.181733] profile_replace+0x153/0x1a0
[ 57.181735] ? rw_verify_area+0x93/0x2d0
[ 57.181740] vfs_write+0x235/0xab0
[ 57.181745] ksys_write+0xb0/0x170
[ 57.181748] do_syscall_64+0x8e/0x660
[ 57.181762] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 57.181765] RIP: 0033:0x7f6192792eb2
Remove the MATCH_FLAG_DIFF_ENCODE condition to validate all DEFAULT_TABLE
entries unconditionally. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix side-effect bug in match_char() macro usage
The match_char() macro evaluates its character parameter multiple
times when traversing differential encoding chains. When invoked
with *str++, the string pointer advances on each iteration of the
inner do-while loop, causing the DFA to check different characters
at each iteration and therefore skip input characters.
This results in out-of-bounds reads when the pointer advances past
the input buffer boundary.
[ 94.984676] ==================================================================
[ 94.985301] BUG: KASAN: slab-out-of-bounds in aa_dfa_match+0x5ae/0x760
[ 94.985655] Read of size 1 at addr ffff888100342000 by task file/976
[ 94.986319] CPU: 7 UID: 1000 PID: 976 Comm: file Not tainted 6.19.0-rc7-next-20260127 #1 PREEMPT(lazy)
[ 94.986322] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 94.986329] Call Trace:
[ 94.986341] <TASK>
[ 94.986347] dump_stack_lvl+0x5e/0x80
[ 94.986374] print_report+0xc8/0x270
[ 94.986384] ? aa_dfa_match+0x5ae/0x760
[ 94.986388] kasan_report+0x118/0x150
[ 94.986401] ? aa_dfa_match+0x5ae/0x760
[ 94.986405] aa_dfa_match+0x5ae/0x760
[ 94.986408] __aa_path_perm+0x131/0x400
[ 94.986418] aa_path_perm+0x219/0x2f0
[ 94.986424] apparmor_file_open+0x345/0x570
[ 94.986431] security_file_open+0x5c/0x140
[ 94.986442] do_dentry_open+0x2f6/0x1120
[ 94.986450] vfs_open+0x38/0x2b0
[ 94.986453] ? may_open+0x1e2/0x2b0
[ 94.986466] path_openat+0x231b/0x2b30
[ 94.986469] ? __x64_sys_openat+0xf8/0x130
[ 94.986477] do_file_open+0x19d/0x360
[ 94.986487] do_sys_openat2+0x98/0x100
[ 94.986491] __x64_sys_openat+0xf8/0x130
[ 94.986499] do_syscall_64+0x8e/0x660
[ 94.986515] ? count_memcg_events+0x15f/0x3c0
[ 94.986526] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986540] ? handle_mm_fault+0x1639/0x1ef0
[ 94.986551] ? vma_start_read+0xf0/0x320
[ 94.986558] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986561] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986563] ? fpregs_assert_state_consistent+0x50/0xe0
[ 94.986572] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986574] ? arch_exit_to_user_mode_prepare+0x9/0xb0
[ 94.986587] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986588] ? irqentry_exit+0x3c/0x590
[ 94.986595] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 94.986597] RIP: 0033:0x7fda4a79c3ea
Fix by extracting the character value before invoking match_char,
ensuring single evaluation per outer loop. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix: limit the number of levels of policy namespaces
Currently the number of policy namespaces is not bounded relying on
the user namespace limit. However policy namespaces aren't strictly
tied to user namespaces and it is possible to create them and nest
them arbitrarily deep which can be used to exhaust system resource.
Hard cap policy namespaces to the same depth as user namespaces. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: replace recursive profile removal with iterative approach
The profile removal code uses recursion when removing nested profiles,
which can lead to kernel stack exhaustion and system crashes.
Reproducer:
$ pf='a'; for ((i=0; i<1024; i++)); do
echo -e "profile $pf { \n }" | apparmor_parser -K -a;
pf="$pf//x";
done
$ echo -n a > /sys/kernel/security/apparmor/.remove
Replace the recursive __aa_profile_list_release() approach with an
iterative approach in __remove_profile(). The function repeatedly
finds and removes leaf profiles until the entire subtree is removed,
maintaining the same removal semantic without recursion. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix memory leak in verify_header
The function sets `*ns = NULL` on every call, leaking the namespace
string allocated in previous iterations when multiple profiles are
unpacked. This also breaks namespace consistency checking since *ns
is always NULL when the comparison is made.
Remove the incorrect assignment.
The caller (aa_unpack) initializes *ns to NULL once before the loop,
which is sufficient. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Drop/zap existing present SPTE even when creating an MMIO SPTE
When installing an emulated MMIO SPTE, do so *after* dropping/zapping the
existing SPTE (if it's shadow-present). While commit a54aa15c6bda3 was
right about it being impossible to convert a shadow-present SPTE to an
MMIO SPTE due to a _guest_ write, it failed to account for writes to guest
memory that are outside the scope of KVM.
E.g. if host userspace modifies a shadowed gPTE to switch from a memslot
to emulted MMIO and then the guest hits a relevant page fault, KVM will
install the MMIO SPTE without first zapping the shadow-present SPTE.
------------[ cut here ]------------
is_shadow_present_pte(*sptep)
WARNING: arch/x86/kvm/mmu/mmu.c:484 at mark_mmio_spte+0xb2/0xc0 [kvm], CPU#0: vmx_ept_stale_r/4292
Modules linked in: kvm_intel kvm irqbypass
CPU: 0 UID: 1000 PID: 4292 Comm: vmx_ept_stale_r Not tainted 7.0.0-rc2-eafebd2d2ab0-sink-vm #319 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:mark_mmio_spte+0xb2/0xc0 [kvm]
Call Trace:
<TASK>
mmu_set_spte+0x237/0x440 [kvm]
ept_page_fault+0x535/0x7f0 [kvm]
kvm_mmu_do_page_fault+0xee/0x1f0 [kvm]
kvm_mmu_page_fault+0x8d/0x620 [kvm]
vmx_handle_exit+0x18c/0x5a0 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0xc55/0x1c20 [kvm]
kvm_vcpu_ioctl+0x2d5/0x980 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb5/0x730
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x47fa3f
</TASK>
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
icmp: fix NULL pointer dereference in icmp_tag_validation()
icmp_tag_validation() unconditionally dereferences the result of
rcu_dereference(inet_protos[proto]) without checking for NULL.
The inet_protos[] array is sparse -- only about 15 of 256 protocol
numbers have registered handlers. When ip_no_pmtu_disc is set to 3
(hardened PMTU mode) and the kernel receives an ICMP Fragmentation
Needed error with a quoted inner IP header containing an unregistered
protocol number, the NULL dereference causes a kernel panic in
softirq context.
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:icmp_unreach (net/ipv4/icmp.c:1085 net/ipv4/icmp.c:1143)
Call Trace:
<IRQ>
icmp_rcv (net/ipv4/icmp.c:1527)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:207)
ip_local_deliver_finish (net/ipv4/ip_input.c:242)
ip_local_deliver (net/ipv4/ip_input.c:262)
ip_rcv (net/ipv4/ip_input.c:573)
__netif_receive_skb_one_core (net/core/dev.c:6164)
process_backlog (net/core/dev.c:6628)
handle_softirqs (kernel/softirq.c:561)
</IRQ>
Add a NULL check before accessing icmp_strict_tag_validation. If the
protocol has no registered handler, return false since it cannot
perform strict tag validation. |
| In the Linux kernel, the following vulnerability has been resolved:
nfnetlink_osf: validate individual option lengths in fingerprints
nfnl_osf_add_callback() validates opt_num bounds and string
NUL-termination but does not check individual option length fields.
A zero-length option causes nf_osf_match_one() to enter the option
matching loop even when foptsize sums to zero, which matches packets
with no TCP options where ctx->optp is NULL:
Oops: general protection fault
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98)
Call Trace:
nf_osf_match (net/netfilter/nfnetlink_osf.c:227)
xt_osf_match_packet (net/netfilter/xt_osf.c:32)
ipt_do_table (net/ipv4/netfilter/ip_tables.c:293)
nf_hook_slow (net/netfilter/core.c:623)
ip_local_deliver (net/ipv4/ip_input.c:262)
ip_rcv (net/ipv4/ip_input.c:573)
Additionally, an MSS option (kind=2) with length < 4 causes
out-of-bounds reads when nf_osf_match_one() unconditionally accesses
optp[2] and optp[3] for MSS value extraction. While RFC 9293
section 3.2 specifies that the MSS option is always exactly 4
bytes (Kind=2, Length=4), the check uses "< 4" rather than
"!= 4" because lengths greater than 4 do not cause memory
safety issues -- the buffer is guaranteed to be at least
foptsize bytes by the ctx->optsize == foptsize check.
Reject fingerprints where any option has zero length, or where an MSS
option has length less than 4, at add time rather than trusting these
values in the packet matching hot path. |
