| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
spi: cadence-quadspi: Parse DT for flashes with the rest of the DT parsing
The recent refactoring of where runtime PM is enabled done in commit
f1eb4e792bb1 ("spi: spi-cadence-quadspi: Enable pm runtime earlier to
avoid imbalance") made the fact that when we do a pm_runtime_disable()
in the error paths of probe() we can trigger a runtime disable which in
turn results in duplicate clock disables. This is particularly likely
to happen when there is missing or broken DT description for the flashes
attached to the controller.
Early on in the probe function we do a pm_runtime_get_noresume() since
the probe function leaves the device in a powered up state but in the
error path we can't assume that PM is enabled so we also manually
disable everything, including clocks. This means that when runtime PM is
active both it and the probe function release the same reference to the
main clock for the IP, triggering warnings from the clock subsystem:
[ 8.693719] clk:75:7 already disabled
[ 8.693791] WARNING: CPU: 1 PID: 185 at /usr/src/kernel/drivers/clk/clk.c:1188 clk_core_disable+0xa0/0xb
...
[ 8.694261] clk_core_disable+0xa0/0xb4 (P)
[ 8.694272] clk_disable+0x38/0x60
[ 8.694283] cqspi_probe+0x7c8/0xc5c [spi_cadence_quadspi]
[ 8.694309] platform_probe+0x5c/0xa4
Dealing with this issue properly is complicated by the fact that we
don't know if runtime PM is active so can't tell if it will disable the
clocks or not. We can, however, sidestep the issue for the flash
descriptions by moving their parsing to when we parse the controller
properties which also save us doing a bunch of setup which can never be
used so let's do that. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: 8822b: Avoid WARNING in rtw8822b_config_trx_mode()
rtw8822b_set_antenna() can be called from userspace when the chip is
powered off. In that case a WARNING is triggered in
rtw8822b_config_trx_mode() because trying to read the RF registers
when the chip is powered off returns an unexpected value.
Call rtw8822b_config_trx_mode() in rtw8822b_set_antenna() only when
the chip is powered on.
------------[ cut here ]------------
write RF mode table fail
WARNING: CPU: 0 PID: 7183 at rtw8822b.c:824 rtw8822b_config_trx_mode.constprop.0+0x835/0x840 [rtw88_8822b]
CPU: 0 UID: 0 PID: 7183 Comm: iw Tainted: G W OE 6.17.5-arch1-1 #1 PREEMPT(full) 01c39fc421df2af799dd5e9180b572af860b40c1
Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: LENOVO 82KR/LNVNB161216, BIOS HBCN18WW 08/27/2021
RIP: 0010:rtw8822b_config_trx_mode.constprop.0+0x835/0x840 [rtw88_8822b]
Call Trace:
<TASK>
rtw8822b_set_antenna+0x57/0x70 [rtw88_8822b 370206f42e5890d8d5f48eb358b759efa37c422b]
rtw_ops_set_antenna+0x50/0x80 [rtw88_core 711c8fb4f686162be4625b1d0b8e8c6a5ac850fb]
ieee80211_set_antenna+0x60/0x100 [mac80211 f1845d85d2ecacf3b71867635a050ece90486cf3]
nl80211_set_wiphy+0x384/0xe00 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda]
? netdev_run_todo+0x63/0x550
genl_family_rcv_msg_doit+0xfc/0x160
genl_rcv_msg+0x1aa/0x2b0
? __pfx_nl80211_pre_doit+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda]
? __pfx_nl80211_set_wiphy+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda]
? __pfx_nl80211_post_doit+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda]
? __pfx_genl_rcv_msg+0x10/0x10
netlink_rcv_skb+0x59/0x110
genl_rcv+0x28/0x40
netlink_unicast+0x285/0x3c0
? __alloc_skb+0xdb/0x1a0
netlink_sendmsg+0x20d/0x430
____sys_sendmsg+0x39f/0x3d0
? import_iovec+0x2f/0x40
___sys_sendmsg+0x99/0xe0
? refill_obj_stock+0x12e/0x240
__sys_sendmsg+0x8a/0xf0
do_syscall_64+0x81/0x970
? do_syscall_64+0x81/0x970
? ksys_read+0x73/0xf0
? do_syscall_64+0x81/0x970
? count_memcg_events+0xc2/0x190
? handle_mm_fault+0x1d7/0x2d0
? do_user_addr_fault+0x21a/0x690
? exc_page_fault+0x7e/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
---[ end trace 0000000000000000 ]--- |
| Improper access control in Azure AI Foundry M365 published agents allows an unauthorized attacker to elevate privileges over a network. |
| Copilot said: i18nextify is a JavaScript library that adds
i18nextify is a JavaScript library that adds website internationalization via a script tag, without source code changes. Versions prior to 3.0.5 interpolate the lng and ns values directly into the configured loadPath / addPath URL template without any encoding, validation, or path sanitisation. When an application exposes the language-code selection to user-controlled input (the default — i18next-browser-languagedetector reads ?lng= query params, cookies, localStorage, and request headers), an attacker can inject characters that change the structure of the outgoing request URL. This is a single URL-injection vulnerability. The attacker-controlled value is neutralised before it is used as part of an output URL string; the attack shape covers both path traversal and broader URL-structure injection — both are closed by the one interpolateUrl sanitisation fix. This issue has been fixed in version 3.0.5. If users cannot upgrade immediately, they can work around the issue by sanitising lng / ns before they reach i18next (strip .., /, \, ?, #, %, whitespace, and control characters; cap the length). |
| Improper access control in Azure Managed Instance for Apache Cassandra allows an authorized attacker to execute code over a network. |
| A reflected HTML injection vulnerability was identified in the GitHub Enterprise Server Management Console login page that could allow credential theft. The redirect_to query parameter on the /setup/unlock endpoint was reflected into an HTML attribute without proper sanitization, enabling an attacker to inject a form element that could capture administrator credentials. Exploitation required an administrator to click a crafted link and enter their credentials. This vulnerability affected GitHub Enterprise Server versions 3.19.1 through 3.19.5 and 3.20.0 through 3.20.1, and was fixed in versions 3.19.6 and 3.20.2. This vulnerability was reported via the GitHub Bug Bounty program. |
| Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. From versions 3.2.0 to before 3.2.11 and 3.3.0 to before 3.3.9, there is a missing authorization and data-masking gap in Argo CD's ServerSideDiff endpoint that allows an attacker with read-only access to extract plaintext Kubernetes Secret data from etcd via the Kubernetes API server's Server-Side Apply dry-run mechanism. This issue has been patched in versions 3.2.11 and 3.3.9. |
| This vulnerability, in the MAXHUB Pivot client application versions
prior to v1.36.2, may allow an attacker to obtain encrypted tenant email
addresses and related metadata from any tenant. Due to the presence of a
hardcoded AES key within the application, the encrypted data can be
decrypted, enabling access to tenant email addresses and associated
information in cleartext. Furthermore, an attacker may be able to cause a
denial-of-service condition by enrolling multiple unauthorized devices
into a tenant via MQTT, potentially disrupting tenant operations. |
| A weakness has been identified in huangjunsen0406 xiaozhi-mcphub up to 1.0.3. This vulnerability affects unknown code of the file src/controllers/dxtController.ts. This manipulation of the argument manifest.name causes path traversal. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| A server-side request forgery (SSRF) vulnerability was identified in the GitHub Enterprise Server notebook viewer that allowed an attacker to access internal services by exploiting URL parser confusion between the validation layer and the HTTP request library. The hostname validation used a different URL parser than the request library, enabling a crafted URL to pass validation while directing the request to an unintended host. Exploitation required network access to the GitHub Enterprise Server instance. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.21 and was fixed in versions 3.16.18, 3.17.15, 3.18.9, 3.19.6, and 3.20.2. This vulnerability was reported via the GitHub Bug Bounty program. |
| An Exposed IOCTL with Insufficient Access Control vulnerability in AsusPTPFilter allows a local user to bypass driver security mechanisms and obtain restricted touchpad information or render the touchpad unusable via crafted IOCTL requests.Refer to the '
Security Update for ASUS Precision Touchpad ' section on the ASUS Security Advisory for more information. |
| An Out-of-bounds Read vulnerability in the IOCTL handler in ASUS System Control Interface allows a local user to cause system crash (BSOD) via a read size that exceeds the buffer size.Refer to the '
Security Update for MyASUS ' section on the ASUS Security Advisory for more information. |
| A vulnerability was determined in Open5GS up to 2.7.7. This impacts the function ogs_sbi_discovery_option_add_snssais in the library /lib/sbi/message.c of the component NSSF. This manipulation causes denial of service. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was determined in SourceCodester SUP Online Shopping 1.0. The impacted element is an unknown function of the file wishlist.php. Executing a manipulation of the argument delwlistid can lead to sql injection. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. |
| Open redirection vulnerability in the latest demo version of the Cradle eCommerce platform. The vulnerability occurs in the login form endpoint, where the ‘returnUrl’ parameter allows redirection because the web application accepts a URL as a parameter without properly validating it. As a result, it is possible to redirect users from the legitimate website to external pages. An attacker could exploit this vulnerability to deceive users and redirect them from a trusted URL to a malicious one without their knowledge. |
| A Cross Site Scripting vulnerability in Alkacon OpenCms before 16 exists via updateModelGroups.jsp. |
| Kimai is an open-source time tracking application. From version 2.27.0 to before version 2.54.0, any ROLE_USER can create a tag with a formula string as its name (e.g. =SUM(54+51)) via POST /api/tags and assign it to a timesheet. When an admin exports timesheets to XLSX, ArrayFormatter.formatValue() joins tag names with implode() and returns the result unchanged. OpenSpout promotes any =-prefixed string to a FormulaCell, writing <f>SUM(54+51)</f> into the XLSX archive. Excel evaluates the formula when the file is opened. This issue has been patched in version 2.54.0. |
| Onyx is an open-source AI platform. Prior to versions 3.0.9, 3.1.6, and 3.2.6, the POST /chat/stop-chat-session/{chat_session_id} endpoint lets any authenticated user stop any other user's active chat session. The endpoint checks authentication but never verifies the session belongs to the caller. An attacker who knows a chat session UUID can kill another user's LLM generation mid-stream. This issue has been patched in versions 3.0.9, 3.1.6, and 3.2.6. |
| A vulnerability has been found in Totolink X5000R 9.1.0u.6369_B20230113. This vulnerability affects the function sub_458E40 of the file /boafrm/formDdns. The manipulation of the argument submit-url leads to buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. |
| OpenLearnX is an open-source, decentralized learning and assessment platform. Prior to version 2.0.3, a remote code execution (RCE) vulnerability was identified in the OpenLearnX code execution environment, allowing sandbox escape and arbitrary command execution. This issue has been patched in version 2.0.3. |
