| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: Work around LLVM bug when gp is used as global register variable
On MIPS, __current_thread_info is defined as global register variable
locating in $gp, and is simply assigned with new address during kernel
relocation.
This however is broken with LLVM, which always restores $gp if it finds
$gp is clobbered in any form, including when intentionally through a
global register variable. This is against GCC's documentation[1], which
requires a callee-saved register used as global register variable not to
be restored if it's clobbered.
As a result, $gp will continue to point to the unrelocated kernel after
the epilog of relocate_kernel(), leading to an early crash in init_idle,
[ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 0000000000000000, epc == ffffffff81afada8, ra == ffffffff81afad90
[ 0.000000] Oops[#1]:
[ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Tainted: G W 6.19.0-rc5-00262-gd3eeb99bbc99-dirty #188 VOLUNTARY
[ 0.000000] Tainted: [W]=WARN
[ 0.000000] Hardware name: loongson,loongson64v-4core-virtio
[ 0.000000] $ 0 : 0000000000000000 0000000000000000 0000000000000001 0000000000000000
[ 0.000000] $ 4 : ffffffff80b80ec0 ffffffff80b53d48 0000000000000000 00000000000f4240
[ 0.000000] $ 8 : 0000000000000100 ffffffff81d82f80 ffffffff81d82f80 0000000000000001
[ 0.000000] $12 : 0000000000000000 ffffffff81776f58 00000000000005da 0000000000000002
[ 0.000000] $16 : ffffffff80b80e40 0000000000000000 ffffffff80b81614 9800000005dfbe80
[ 0.000000] $20 : 00000000540000e0 ffffffff81980000 0000000000000000 ffffffff80f81c80
[ 0.000000] $24 : 0000000000000a26 ffffffff8114fb90
[ 0.000000] $28 : ffffffff80b50000 ffffffff80b53d40 0000000000000000 ffffffff81afad90
[ 0.000000] Hi : 0000000000000000
[ 0.000000] Lo : 0000000000000000
[ 0.000000] epc : ffffffff81afada8 init_idle+0x130/0x270
[ 0.000000] ra : ffffffff81afad90 init_idle+0x118/0x270
[ 0.000000] Status: 540000e2 KX SX UX KERNEL EXL
[ 0.000000] Cause : 00000008 (ExcCode 02)
[ 0.000000] BadVA : 0000000000000000
[ 0.000000] PrId : 00006305 (ICT Loongson-3)
[ 0.000000] Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000)
[ 0.000000] Stack : 9800000005dfbf00 ffffffff8178e950 0000000000000000 0000000000000000
[ 0.000000] 0000000000000000 ffffffff81970000 000000000000003f ffffffff810a6528
[ 0.000000] 0000000000000001 9800000005dfbe80 9800000005dfbf00 ffffffff81980000
[ 0.000000] ffffffff810a6450 ffffffff81afb6c0 0000000000000000 ffffffff810a2258
[ 0.000000] ffffffff81d82ec8 ffffffff8198d010 ffffffff81b67e80 ffffffff8197dd98
[ 0.000000] ffffffff81d81c80 ffffffff81930000 0000000000000040 0000000000000000
[ 0.000000] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 0.000000] 0000000000000000 000000000000009e ffffffff9fc01000 0000000000000000
[ 0.000000] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 0.000000] 0000000000000000 ffffffff81ae86dc ffffffff81b3c741 0000000000000002
[ 0.000000] ...
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff81afada8>] init_idle+0x130/0x270
[ 0.000000] [<ffffffff81afb6c0>] sched_init+0x5c8/0x6c0
[ 0.000000] [<ffffffff81ae86dc>] start_kernel+0x27c/0x7a8
This bug has been reported to LLVM[2] and affects version from (at
least) 18 to 21. Let's work around this by using inline assembly to
assign $gp before a fix is widely available. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: fsl-edma: don't explicitly disable clocks in .remove()
The clocks in fsl_edma_engine::muxclk are allocated and enabled with
devm_clk_get_enabled(), which automatically cleans these resources up,
but these clocks are also manually disabled in fsl_edma_remove(). This
causes warnings on driver removal for each clock:
edma_module already disabled
WARNING: CPU: 0 PID: 418 at drivers/clk/clk.c:1200 clk_core_disable+0x198/0x1c8
[...]
Call trace:
clk_core_disable+0x198/0x1c8 (P)
clk_disable+0x34/0x58
fsl_edma_remove+0x74/0xe8 [fsl_edma]
[...]
---[ end trace 0000000000000000 ]---
edma_module already unprepared
WARNING: CPU: 0 PID: 418 at drivers/clk/clk.c:1059 clk_core_unprepare+0x1f8/0x220
[...]
Call trace:
clk_core_unprepare+0x1f8/0x220 (P)
clk_unprepare+0x34/0x58
fsl_edma_remove+0x7c/0xe8 [fsl_edma]
[...]
---[ end trace 0000000000000000 ]---
Fix these warnings by removing the unnecessary fsl_disable_clocks() call
in fsl_edma_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
NFS/localio: prevent direct reclaim recursion into NFS via nfs_writepages
LOCALIO is an NFS loopback mount optimization that avoids using the
network for READ, WRITE and COMMIT if the NFS client and server are
determined to be on the same system. But because LOCALIO is still
fundamentally "just NFS loopback mount" it is susceptible to recursion
deadlock via direct reclaim, e.g.: NFS LOCALIO down to XFS and then
back into NFS via nfs_writepages.
Fix LOCALIO's potential for direct reclaim deadlock by ensuring that
all its page cache allocations are done from GFP_NOFS context.
Thanks to Ben Coddington for pointing out commit ad22c7a043c2 ("xfs:
prevent stack overflows from page cache allocation"). |
| In the Linux kernel, the following vulnerability has been resolved:
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
When reading /proc/[pid]/stat, do_task_stat() accesses task->real_parent
without proper RCU protection, which leads to:
cpu 0 cpu 1
----- -----
do_task_stat
var = task->real_parent
release_task
call_rcu(delayed_put_task_struct)
task_tgid_nr_ns(var)
rcu_read_lock <--- Too late to protect task->real_parent!
task_pid_ptr <--- UAF!
rcu_read_unlock
This patch uses task_ppid_nr_ns() instead of task_tgid_nr_ns() to add
proper RCU protection for accessing task->real_parent. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: fsl_xcvr: Revert fix missing lock in fsl_xcvr_mode_put()
This reverts commit f51424872760 ("ASoC: fsl_xcvr: fix missing lock in fsl_xcvr_mode_put()").
The original patch attempted to acquire the card->controls_rwsem lock in
fsl_xcvr_mode_put(). However, this function is called from the upper ALSA
core function snd_ctl_elem_write(), which already holds the write lock on
controls_rwsem for the whole put operation. So there is no need to simply
hold the lock for fsl_xcvr_activate_ctl() again.
Acquiring the read lock while holding the write lock in the same thread
results in a deadlock and a hung task, as reported by Alexander Stein. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix WQ_MEM_RECLAIM warning
When sunrpc is used, if a reset triggered, our wq may lead the
following trace:
workqueue: WQ_MEM_RECLAIM xprtiod:xprt_rdma_connect_worker [rpcrdma]
is flushing !WQ_MEM_RECLAIM hns_roce_irq_workq:flush_work_handle
[hns_roce_hw_v2]
WARNING: CPU: 0 PID: 8250 at kernel/workqueue.c:2644 check_flush_dependency+0xe0/0x144
Call trace:
check_flush_dependency+0xe0/0x144
start_flush_work.constprop.0+0x1d0/0x2f0
__flush_work.isra.0+0x40/0xb0
flush_work+0x14/0x30
hns_roce_v2_destroy_qp+0xac/0x1e0 [hns_roce_hw_v2]
ib_destroy_qp_user+0x9c/0x2b4
rdma_destroy_qp+0x34/0xb0
rpcrdma_ep_destroy+0x28/0xcc [rpcrdma]
rpcrdma_ep_put+0x74/0xb4 [rpcrdma]
rpcrdma_xprt_disconnect+0x1d8/0x260 [rpcrdma]
xprt_rdma_connect_worker+0xc0/0x120 [rpcrdma]
process_one_work+0x1cc/0x4d0
worker_thread+0x154/0x414
kthread+0x104/0x144
ret_from_fork+0x10/0x18
Since QP destruction frees memory, this wq should have the WQ_MEM_RECLAIM. |
| In the Linux kernel, the following vulnerability has been resolved:
inet: RAW sockets using IPPROTO_RAW MUST drop incoming ICMP
Yizhou Zhao reported that simply having one RAW socket on protocol
IPPROTO_RAW (255) was dangerous.
socket(AF_INET, SOCK_RAW, 255);
A malicious incoming ICMP packet can set the protocol field to 255
and match this socket, leading to FNHE cache changes.
inner = IP(src="192.168.2.1", dst="8.8.8.8", proto=255)/Raw("TEST")
pkt = IP(src="192.168.1.1", dst="192.168.2.1")/ICMP(type=3, code=4, nexthopmtu=576)/inner
"man 7 raw" states:
A protocol of IPPROTO_RAW implies enabled IP_HDRINCL and is able
to send any IP protocol that is specified in the passed header.
Receiving of all IP protocols via IPPROTO_RAW is not possible
using raw sockets.
Make sure we drop these malicious packets. |
| Wikidforum 2.20 contains a cross-site scripting vulnerability that allows authenticated attackers to inject malicious scripts by submitting crafted HTML in the reply_text parameter. Attackers can post comments containing JavaScript code through the rpc.php endpoint that executes in other users' browsers when viewing forum replies. |
| Mercusys AC12G (EU) V1 router with firmware AC12G(EU)_V1_200909 does not validate the HTTP Host header, enabling DNS rebinding attacks. An external attacker can rebind a domain to the router's internal IP address, extending the CORS wildcard vulnerability (Access-Control-Allow-Origin: *) to internet-originated attacks. |
| A flaw was found in Samba’s vfs_worm module. The module is intended to provide write-once, read-many (WORM) protections by preventing modification of files after a configurable grace period. Due to insufficient validation during rename operations, an authenticated user with write access to a share could overwrite a protected file by renaming a newly created file over the existing WORM-protected file. |
| A flaw was found in libcap. A local unprivileged user can exploit a Time-of-check-to-time-of-use (TOCTOU) race condition in the `cap_set_file()` function. This allows an attacker with write access to a parent directory to redirect file capability updates to an attacker-controlled file. By doing so, capabilities can be injected into or stripped from unintended executables, leading to privilege escalation. |
| A flaw was found in the Samba printing subsystem. Samba passes the client-controlled job description string to the command configured with the "print command" setting via the "%J"
substitution character without escaping shell meta characters. A remote attacker could exploit this vulnerability by sending a specially crafted print job description that contains unescaped shell characters. This could lead to remote code execution on the affected system. |
| A flaw was found in Samba. A remote attacker can exploit a misconfiguration in Samba file servers and classic domain controllers that use the "check password script" feature. If this script is configured with the %u substitution character, the client-controlled username is passed without proper escaping of shell meta-characters. This vulnerability allows an attacker to achieve remote command execution on the affected system. This issue primarily affects non-standard configurations where the "check password script" is used with %u and the samba-dcerpcd service is started as a system service. |
| A flaw was found in Samba’s certificate auto-enrollment Group Policy handling. When certificate auto-enrollment is enabled, Samba may retrieve a CA certificate over an unencrypted HTTP connection and install it into the local trust store without proper verification. An attacker with the ability to intercept or redirect network traffic could exploit this behavior to supply a malicious certificate authority certificate, potentially allowing interception or spoofing of trusted communications. |
| A flaw was found in Samba’s handling of NTFS-style reparse points on shares configured with read only = yes. Due to missing SMB-layer access checks, authenticated users with underlying filesystem write permissions may create or delete reparse point metadata through SMB operations even on read-only exports. This could allow modification of SMB-visible file behavior, including converting files into symbolic links or other reparse point types. |
| Net::Async::Statsd::Client versions through 0.005 for Perl allow metric injections.
The metric names are not checked for newlines, colons or pipes. Metrics generated from untrusted sources could inject additional statsd metrics. |
| Vulnerability in the Net Service component of Oracle Database Server. Supported versions that are affected are 23.4.0-23.26.2. Difficult to exploit vulnerability allows unauthenticated attacker with network access via TLS to compromise Net Service. While the vulnerability is in Net Service, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Net Service. CVSS 3.1 Base Score 9.0 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:H). |
| Mercusys AC12G (EU) V1 router with firmware AC12G(EU)_V1_200909 encrypts configuration backups with a hardcoded DES key using single DES in ECB mode. An attacker who obtains a backup file can decrypt it to recover all stored credentials including admin password, WiFi PSK, and DDNS credentials. |
| In the Linux kernel, the following vulnerability has been resolved:
clocksource/drivers/timer-sp804: Fix an Oops when read_current_timer is called on ARM32 platforms where the SP804 is not registered as the sched_clock.
On SP804, the delay timer shares the same clkevt instance with
sched_clock. On some platforms, when
sp804_clocksource_and_sched_clock_init is called with use_sched_clock
not set to 1, sched_clkevt is not properly initialized. However,
sp804_register_delay_timer is invoked unconditionally, and
read_current_timer() subsequently calls sp804_read on an uninitialized
sched_clkevt, leading to a kernel Oops when accessing
sched_clkevt->value.
Declare a dedicated clkevt instance exclusively for delay timer,
instead of sharing the same clkevt with sched_clock. This ensures
that read_current_timer continues to work correctly regardless of
whether SP804 is selected as the sched_clock. |
| Dräger Protector Software prior to version 6.4.2 contains a local privilege escalation vulnerability due to insecure file system permissions that allows local attackers to execute arbitrary code with elevated privileges. Attackers can replace binaries or loaded modules on the host system to execute code with NT SYSTEM privileges. |
