| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| systemd, a system and service manager, (as PID 1) hits an assert and freezes execution when an unprivileged IPC API call is made with spurious data. On version v249 and older the effect is not an assert, but stack overwriting, with the attacker controlled content. From version v250 and newer this is not possible as the safety check causes an assert instead. This IPC call was added in v239, so versions older than that are not affected. Versions 260-rc1, 259.2, 258.5, and 257.11 contain patches. No known workarounds are available. |
| Discourse is an open-source discussion platform. Prior to versions 2026.3.0-latest.1, 2026.2.1, and 2026.1.2, staff can modify any user's group notification level. Versions 2026.3.0-latest.1, 2026.2.1, and 2026.1.2 contain a patch. No known workarounds are available. |
| Blinko is an AI-powered card note-taking project. In versions from 1.8.3 and prior, the fileName parameter is not filtered, allowing path traversal to write files anywhere on the file system. Moreover, this interface only requires authProcedure (normal user), not superAdminAuthMiddleware. At time of publication, there are no publicly available patches. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/mediatek: fix use-after-free on probe deferral
The driver is dropping the references taken to the larb devices during
probe after successful lookup as well as on errors. This can
potentially lead to a use-after-free in case a larb device has not yet
been bound to its driver so that the iommu driver probe defers.
Fix this by keeping the references as expected while the iommu driver is
bound. |
| In the Linux kernel, the following vulnerability has been resolved:
shmem: fix recovery on rename failures
maple_tree insertions can fail if we are seriously short on memory;
simple_offset_rename() does not recover well if it runs into that.
The same goes for simple_offset_rename_exchange().
Moreover, shmem_whiteout() expects that if it succeeds, the caller will
progress to d_move(), i.e. that shmem_rename2() won't fail past the
successful call of shmem_whiteout().
Not hard to fix, fortunately - mtree_store() can't fail if the index we
are trying to store into is already present in the tree as a singleton.
For simple_offset_rename_exchange() that's enough - we just need to be
careful about the order of operations.
For simple_offset_rename() solution is to preinsert the target into the
tree for new_dir; the rest can be done without any potentially failing
operations.
That preinsertion has to be done in shmem_rename2() rather than in
simple_offset_rename() itself - otherwise we'd need to deal with the
possibility of failure after successful shmem_whiteout(). |
| In the Linux kernel, the following vulnerability has been resolved:
Input: lkkbd - disable pending work before freeing device
lkkbd_interrupt() schedules lk->tq via schedule_work(), and the work
handler lkkbd_reinit() dereferences the lkkbd structure and its
serio/input_dev fields.
lkkbd_disconnect() and error paths in lkkbd_connect() free the lkkbd
structure without preventing the reinit work from being queued again
until serio_close() returns. This can allow the work handler to run
after the structure has been freed, leading to a potential use-after-free.
Use disable_work_sync() instead of cancel_work_sync() to ensure the
reinit work cannot be re-queued, and call it both in lkkbd_disconnect()
and in lkkbd_connect() error paths after serio_open(). |
| BulletProof FTP Server 2019.0.0.50 contains a denial of service vulnerability in the Storage-Path configuration parameter that allows local attackers to crash the application by supplying an excessively long string value. Attackers can enable the Override Storage-Path setting and paste a buffer of 500 bytes or more to trigger an application crash when saving the configuration. |
| CSLA .NET is a framework designed for the development of reusable, object-oriented business layers for applications. Versions 5.5.4 and below allow the use of WcfProxy. WcfProxy uses the now-obsolete NetDataContractSerializer (NDCS) and is vulnerable to remote code execution during deserialization. This vulnerability is fixed in version 6.0.0. To workaround this issue, remove the WcfProxy in data portal configurations. |
| BulletProof FTP Server 2019.0.0.50 contains a denial of service vulnerability in the DNS Address field that allows local attackers to crash the application by supplying an excessively long string. Attackers can enable the DNS Address option in the Firewall settings and paste a buffer of 700 bytes to trigger a crash when the Test function is invoked. |
| WWBN AVideo is an open source video platform. In versions up to and including 26.0, the `plugin/AD_Server/reports.json.php` endpoint performs no authentication or authorization checks, allowing any unauthenticated attacker to extract ad campaign analytics data including video titles, user channel names, user IDs, ad campaign names, and impression/click counts. The HTML counterpart (`reports.php`) and CSV export (`getCSV.php`) both correctly enforce `User::isAdmin()`, but the JSON API was left unprotected. Commit daca4ffb1ce19643eecaa044362c41ac2ce45dde contains a patch. |
| WWBN AVideo is an open source video platform. In versions up to and including 26.0, the `Subscribe::save()` method in `objects/subscribe.php` concatenates the `$this->users_id` property directly into an INSERT SQL query without sanitization or parameterized binding. This property originates from `$_POST['user_id']` in both `subscribe.json.php` and `subscribeNotify.json.php`. An authenticated attacker can inject arbitrary SQL to extract sensitive data from any database table, including password hashes, API keys, and encryption salts. Commit 36dfae22059fbd66fd34bbc5568a838fc0efd66c contains a patch. |
| In the Linux kernel, the following vulnerability has been resolved:
functionfs: fix the open/removal races
ffs_epfile_open() can race with removal, ending up with file->private_data
pointing to freed object.
There is a total count of opened files on functionfs (both ep0 and
dynamic ones) and when it hits zero, dynamic files get removed.
Unfortunately, that removal can happen while another thread is
in ffs_epfile_open(), but has not incremented the count yet.
In that case open will succeed, leaving us with UAF on any subsequent
read() or write().
The root cause is that ffs->opened is misused; atomic_dec_and_test() vs.
atomic_add_return() is not a good idea, when object remains visible all
along.
To untangle that
* serialize openers on ffs->mutex (both for ep0 and for dynamic files)
* have dynamic ones use atomic_inc_not_zero() and fail if we had
zero ->opened; in that case the file we are opening is doomed.
* have the inodes of dynamic files marked on removal (from the
callback of simple_recursive_removal()) - clear ->i_private there.
* have open of dynamic ones verify they hadn't been already removed,
along with checking that state is FFS_ACTIVE. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: aic94xx: fix use-after-free in device removal path
The asd_pci_remove() function fails to synchronize with pending tasklets
before freeing the asd_ha structure, leading to a potential
use-after-free vulnerability.
When a device removal is triggered (via hot-unplug or module unload),
race condition can occur.
The fix adds tasklet_kill() before freeing the asd_ha structure,
ensuring all scheduled tasklets complete before cleanup proceeds. |
| In the Linux kernel, the following vulnerability has been resolved:
via_wdt: fix critical boot hang due to unnamed resource allocation
The VIA watchdog driver uses allocate_resource() to reserve a MMIO
region for the watchdog control register. However, the allocated
resource was not given a name, which causes the kernel resource tree
to contain an entry marked as "<BAD>" under /proc/iomem on x86
platforms.
During boot, this unnamed resource can lead to a critical hang because
subsequent resource lookups and conflict checks fail to handle the
invalid entry properly. |
| In the Linux kernel, the following vulnerability has been resolved:
um: init cpu_tasks[] earlier
This is currently done in uml_finishsetup(), but e.g. with
KCOV enabled we'll crash because some init code can call
into e.g. memparse(), which has coverage annotations, and
then the checks in check_kcov_mode() crash because current
is NULL.
Simply initialize the cpu_tasks[] array statically, which
fixes the crash. For the later SMP work, it seems to have
not really caused any problems yet, but initialize all of
the entries anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/oa: Limit num_syncs to prevent oversized allocations
The OA open parameters did not validate num_syncs, allowing
userspace to pass arbitrarily large values, potentially
leading to excessive allocations.
Add check to ensure that num_syncs does not exceed DRM_XE_MAX_SYNCS,
returning -EINVAL when the limit is violated.
v2: use XE_IOCTL_DBG() and drop duplicated check. (Ashutosh)
(cherry picked from commit e057b2d2b8d815df3858a87dffafa2af37e5945b) |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: Cap the number of PCR banks
tpm2_get_pcr_allocation() does not cap any upper limit for the number of
banks. Cap the limit to eight banks so that out of bounds values coming
from external I/O cause on only limited harm. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: make decode_pool() more resilient against corrupted osdmaps
If the osdmap is (maliciously) corrupted such that the encoded length
of ceph_pg_pool envelope is less than what is expected for a particular
encoding version, out-of-bounds reads may ensue because the only bounds
check that is there is based on that length value.
This patch adds explicit bounds checks for each field that is decoded
or skipped. |
| In the Linux kernel, the following vulnerability has been resolved:
block: Remove queue freezing from several sysfs store callbacks
Freezing the request queue from inside sysfs store callbacks may cause a
deadlock in combination with the dm-multipath driver and the
queue_if_no_path option. Additionally, freezing the request queue slows
down system boot on systems where sysfs attributes are set synchronously.
Fix this by removing the blk_mq_freeze_queue() / blk_mq_unfreeze_queue()
calls from the store callbacks that do not strictly need these callbacks.
Add the __data_racy annotation to request_queue.rq_timeout to suppress
KCSAN data race reports about the rq_timeout reads.
This patch may cause a small delay in applying the new settings.
For all the attributes affected by this patch, I/O will complete
correctly whether the old or the new value of the attribute is used.
This patch affects the following sysfs attributes:
* io_poll_delay
* io_timeout
* nomerges
* read_ahead_kb
* rq_affinity
Here is an example of a deadlock triggered by running test srp/002
if this patch is not applied:
task:multipathd
Call Trace:
<TASK>
__schedule+0x8c1/0x1bf0
schedule+0xdd/0x270
schedule_preempt_disabled+0x1c/0x30
__mutex_lock+0xb89/0x1650
mutex_lock_nested+0x1f/0x30
dm_table_set_restrictions+0x823/0xdf0
__bind+0x166/0x590
dm_swap_table+0x2a7/0x490
do_resume+0x1b1/0x610
dev_suspend+0x55/0x1a0
ctl_ioctl+0x3a5/0x7e0
dm_ctl_ioctl+0x12/0x20
__x64_sys_ioctl+0x127/0x1a0
x64_sys_call+0xe2b/0x17d0
do_syscall_64+0x96/0x3a0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
task:(udev-worker)
Call Trace:
<TASK>
__schedule+0x8c1/0x1bf0
schedule+0xdd/0x270
blk_mq_freeze_queue_wait+0xf2/0x140
blk_mq_freeze_queue_nomemsave+0x23/0x30
queue_ra_store+0x14e/0x290
queue_attr_store+0x23e/0x2c0
sysfs_kf_write+0xde/0x140
kernfs_fop_write_iter+0x3b2/0x630
vfs_write+0x4fd/0x1390
ksys_write+0xfd/0x230
__x64_sys_write+0x76/0xc0
x64_sys_call+0x276/0x17d0
do_syscall_64+0x96/0x3a0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: BUG() in pskb_expand_head() as part of calipso_skbuff_setattr()
There exists a kernel oops caused by a BUG_ON(nhead < 0) at
net/core/skbuff.c:2232 in pskb_expand_head().
This bug is triggered as part of the calipso_skbuff_setattr()
routine when skb_cow() is passed headroom > INT_MAX
(i.e. (int)(skb_headroom(skb) + len_delta) < 0).
The root cause of the bug is due to an implicit integer cast in
__skb_cow(). The check (headroom > skb_headroom(skb)) is meant to ensure
that delta = headroom - skb_headroom(skb) is never negative, otherwise
we will trigger a BUG_ON in pskb_expand_head(). However, if
headroom > INT_MAX and delta <= -NET_SKB_PAD, the check passes, delta
becomes negative, and pskb_expand_head() is passed a negative value for
nhead.
Fix the trigger condition in calipso_skbuff_setattr(). Avoid passing
"negative" headroom sizes to skb_cow() within calipso_skbuff_setattr()
by only using skb_cow() to grow headroom.
PoC:
Using `netlabelctl` tool:
netlabelctl map del default
netlabelctl calipso add pass doi:7
netlabelctl map add default address:0::1/128 protocol:calipso,7
Then run the following PoC:
int fd = socket(AF_INET6, SOCK_DGRAM, IPPROTO_UDP);
// setup msghdr
int cmsg_size = 2;
int cmsg_len = 0x60;
struct msghdr msg;
struct sockaddr_in6 dest_addr;
struct cmsghdr * cmsg = (struct cmsghdr *) calloc(1,
sizeof(struct cmsghdr) + cmsg_len);
msg.msg_name = &dest_addr;
msg.msg_namelen = sizeof(dest_addr);
msg.msg_iov = NULL;
msg.msg_iovlen = 0;
msg.msg_control = cmsg;
msg.msg_controllen = cmsg_len;
msg.msg_flags = 0;
// setup sockaddr
dest_addr.sin6_family = AF_INET6;
dest_addr.sin6_port = htons(31337);
dest_addr.sin6_flowinfo = htonl(31337);
dest_addr.sin6_addr = in6addr_loopback;
dest_addr.sin6_scope_id = 31337;
// setup cmsghdr
cmsg->cmsg_len = cmsg_len;
cmsg->cmsg_level = IPPROTO_IPV6;
cmsg->cmsg_type = IPV6_HOPOPTS;
char * hop_hdr = (char *)cmsg + sizeof(struct cmsghdr);
hop_hdr[1] = 0x9; //set hop size - (0x9 + 1) * 8 = 80
sendmsg(fd, &msg, 0); |
