| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
of: unittest: fix null pointer dereferencing in of_unittest_find_node_by_name()
when kmalloc() fail to allocate memory in kasprintf(), name
or full_name will be NULL, strcmp() will cause
null pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
quota: fix warning in dqgrab()
There's issue as follows when do fault injection:
WARNING: CPU: 1 PID: 14870 at include/linux/quotaops.h:51 dquot_disable+0x13b7/0x18c0
Modules linked in:
CPU: 1 PID: 14870 Comm: fsconfig Not tainted 6.3.0-next-20230505-00006-g5107a9c821af-dirty #541
RIP: 0010:dquot_disable+0x13b7/0x18c0
RSP: 0018:ffffc9000acc79e0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88825e41b980
RDX: 0000000000000000 RSI: ffff88825e41b980 RDI: 0000000000000002
RBP: ffff888179f68000 R08: ffffffff82087ca7 R09: 0000000000000000
R10: 0000000000000001 R11: ffffed102f3ed026 R12: ffff888179f68130
R13: ffff888179f68110 R14: dffffc0000000000 R15: ffff888179f68118
FS: 00007f450a073740(0000) GS:ffff88882fc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffe96f2efd8 CR3: 000000025c8ad000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
dquot_load_quota_sb+0xd53/0x1060
dquot_resume+0x172/0x230
ext4_reconfigure+0x1dc6/0x27b0
reconfigure_super+0x515/0xa90
__x64_sys_fsconfig+0xb19/0xd20
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Above issue may happens as follows:
ProcessA ProcessB ProcessC
sys_fsconfig
vfs_fsconfig_locked
reconfigure_super
ext4_remount
dquot_suspend -> suspend all type quota
sys_fsconfig
vfs_fsconfig_locked
reconfigure_super
ext4_remount
dquot_resume
ret = dquot_load_quota_sb
add_dquot_ref
do_open -> open file O_RDWR
vfs_open
do_dentry_open
get_write_access
atomic_inc_unless_negative(&inode->i_writecount)
ext4_file_open
dquot_file_open
dquot_initialize
__dquot_initialize
dqget
atomic_inc(&dquot->dq_count);
__dquot_initialize
__dquot_initialize
dqget
if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags))
ext4_acquire_dquot
-> Return error DQ_ACTIVE_B flag isn't set
dquot_disable
invalidate_dquots
if (atomic_read(&dquot->dq_count))
dqgrab
WARN_ON_ONCE(!test_bit(DQ_ACTIVE_B, &dquot->dq_flags))
-> Trigger warning
In the above scenario, 'dquot->dq_flags' has no DQ_ACTIVE_B is normal when
dqgrab().
To solve above issue just replace the dqgrab() use in invalidate_dquots() with
atomic_inc(&dquot->dq_count). |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: stricter state check in mptcp_worker
As reported by Christoph, the mptcp protocol can run the
worker when the relevant msk socket is in an unexpected state:
connect()
// incoming reset + fastclose
// the mptcp worker is scheduled
mptcp_disconnect()
// msk is now CLOSED
listen()
mptcp_worker()
Leading to the following splat:
divide error: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 21 Comm: kworker/1:0 Not tainted 6.3.0-rc1-gde5e8fd0123c #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
Workqueue: events mptcp_worker
RIP: 0010:__tcp_select_window+0x22c/0x4b0 net/ipv4/tcp_output.c:3018
RSP: 0018:ffffc900000b3c98 EFLAGS: 00010293
RAX: 000000000000ffd7 RBX: 000000000000ffd7 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8214ce97 RDI: 0000000000000004
RBP: 000000000000ffd7 R08: 0000000000000004 R09: 0000000000010000
R10: 000000000000ffd7 R11: ffff888005afa148 R12: 000000000000ffd7
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88803ed00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000405270 CR3: 000000003011e006 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
tcp_select_window net/ipv4/tcp_output.c:262 [inline]
__tcp_transmit_skb+0x356/0x1280 net/ipv4/tcp_output.c:1345
tcp_transmit_skb net/ipv4/tcp_output.c:1417 [inline]
tcp_send_active_reset+0x13e/0x320 net/ipv4/tcp_output.c:3459
mptcp_check_fastclose net/mptcp/protocol.c:2530 [inline]
mptcp_worker+0x6c7/0x800 net/mptcp/protocol.c:2705
process_one_work+0x3bd/0x950 kernel/workqueue.c:2390
worker_thread+0x5b/0x610 kernel/workqueue.c:2537
kthread+0x138/0x170 kernel/kthread.c:376
ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308
</TASK>
This change addresses the issue explicitly checking for bad states
before running the mptcp worker. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: xiic: xiic_xfer(): Fix runtime PM leak on error path
The xiic_xfer() function gets a runtime PM reference when the function is
entered. This reference is released when the function is exited. There is
currently one error path where the function exits directly, which leads to
a leak of the runtime PM reference.
Make sure that this error path also releases the runtime PM reference. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio: Fix NULL pointer dereference caused by uninitialized group->iommufd
group->iommufd is not initialized for the iommufd_ctx_put()
[20018.331541] BUG: kernel NULL pointer dereference, address: 0000000000000000
[20018.377508] RIP: 0010:iommufd_ctx_put+0x5/0x10 [iommufd]
...
[20018.476483] Call Trace:
[20018.479214] <TASK>
[20018.481555] vfio_group_fops_unl_ioctl+0x506/0x690 [vfio]
[20018.487586] __x64_sys_ioctl+0x6a/0xb0
[20018.491773] ? trace_hardirqs_on+0xc5/0xe0
[20018.496347] do_syscall_64+0x67/0x90
[20018.500340] entry_SYSCALL_64_after_hwframe+0x4b/0xb5 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable preemption in bpf_event_output
We received report [1] of kernel crash, which is caused by
using nesting protection without disabled preemption.
The bpf_event_output can be called by programs executed by
bpf_prog_run_array_cg function that disabled migration but
keeps preemption enabled.
This can cause task to be preempted by another one inside the
nesting protection and lead eventually to two tasks using same
perf_sample_data buffer and cause crashes like:
BUG: kernel NULL pointer dereference, address: 0000000000000001
#PF: supervisor instruction fetch in kernel mode
#PF: error_code(0x0010) - not-present page
...
? perf_output_sample+0x12a/0x9a0
? finish_task_switch.isra.0+0x81/0x280
? perf_event_output+0x66/0xa0
? bpf_event_output+0x13a/0x190
? bpf_event_output_data+0x22/0x40
? bpf_prog_dfc84bbde731b257_cil_sock4_connect+0x40a/0xacb
? xa_load+0x87/0xe0
? __cgroup_bpf_run_filter_sock_addr+0xc1/0x1a0
? release_sock+0x3e/0x90
? sk_setsockopt+0x1a1/0x12f0
? udp_pre_connect+0x36/0x50
? inet_dgram_connect+0x93/0xa0
? __sys_connect+0xb4/0xe0
? udp_setsockopt+0x27/0x40
? __pfx_udp_push_pending_frames+0x10/0x10
? __sys_setsockopt+0xdf/0x1a0
? __x64_sys_connect+0xf/0x20
? do_syscall_64+0x3a/0x90
? entry_SYSCALL_64_after_hwframe+0x72/0xdc
Fixing this by disabling preemption in bpf_event_output.
[1] https://github.com/cilium/cilium/issues/26756 |
| In the Linux kernel, the following vulnerability has been resolved:
x86/hyperv: Disable IBT when hypercall page lacks ENDBR instruction
On hardware that supports Indirect Branch Tracking (IBT), Hyper-V VMs
with ConfigVersion 9.3 or later support IBT in the guest. However,
current versions of Hyper-V have a bug in that there's not an ENDBR64
instruction at the beginning of the hypercall page. Since hypercalls are
made with an indirect call to the hypercall page, all hypercall attempts
fail with an exception and Linux panics.
A Hyper-V fix is in progress to add ENDBR64. But guard against the Linux
panic by clearing X86_FEATURE_IBT if the hypercall page doesn't start
with ENDBR. The VM will boot and run without IBT.
If future Linux 32-bit kernels were to support IBT, additional hypercall
page hackery would be needed to make IBT work for such kernels in a
Hyper-V VM. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix memory leak of iter->temp when reading trace_pipe
kmemleak reports:
unreferenced object 0xffff88814d14e200 (size 256):
comm "cat", pid 336, jiffies 4294871818 (age 779.490s)
hex dump (first 32 bytes):
04 00 01 03 00 00 00 00 08 00 00 00 00 00 00 00 ................
0c d8 c8 9b ff ff ff ff 04 5a ca 9b ff ff ff ff .........Z......
backtrace:
[<ffffffff9bdff18f>] __kmalloc+0x4f/0x140
[<ffffffff9bc9238b>] trace_find_next_entry+0xbb/0x1d0
[<ffffffff9bc9caef>] trace_print_lat_context+0xaf/0x4e0
[<ffffffff9bc94490>] print_trace_line+0x3e0/0x950
[<ffffffff9bc95499>] tracing_read_pipe+0x2d9/0x5a0
[<ffffffff9bf03a43>] vfs_read+0x143/0x520
[<ffffffff9bf04c2d>] ksys_read+0xbd/0x160
[<ffffffff9d0f0edf>] do_syscall_64+0x3f/0x90
[<ffffffff9d2000aa>] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
when reading file 'trace_pipe', 'iter->temp' is allocated or relocated
in trace_find_next_entry() but not freed before 'trace_pipe' is closed.
To fix it, free 'iter->temp' in tracing_release_pipe(). |
| In the Linux kernel, the following vulnerability has been resolved:
keys: Fix linking a duplicate key to a keyring's assoc_array
When making a DNS query inside the kernel using dns_query(), the request
code can in rare cases end up creating a duplicate index key in the
assoc_array of the destination keyring. It is eventually found by
a BUG_ON() check in the assoc_array implementation and results in
a crash.
Example report:
[2158499.700025] kernel BUG at ../lib/assoc_array.c:652!
[2158499.700039] invalid opcode: 0000 [#1] SMP PTI
[2158499.700065] CPU: 3 PID: 31985 Comm: kworker/3:1 Kdump: loaded Not tainted 5.3.18-150300.59.90-default #1 SLE15-SP3
[2158499.700096] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
[2158499.700351] Workqueue: cifsiod cifs_resolve_server [cifs]
[2158499.700380] RIP: 0010:assoc_array_insert+0x85f/0xa40
[2158499.700401] Code: ff 74 2b 48 8b 3b 49 8b 45 18 4c 89 e6 48 83 e7 fe e8 95 ec 74 00 3b 45 88 7d db 85 c0 79 d4 0f 0b 0f 0b 0f 0b e8 41 f2 be ff <0f> 0b 0f 0b 81 7d 88 ff ff ff 7f 4c 89 eb 4c 8b ad 58 ff ff ff 0f
[2158499.700448] RSP: 0018:ffffc0bd6187faf0 EFLAGS: 00010282
[2158499.700470] RAX: ffff9f1ea7da2fe8 RBX: ffff9f1ea7da2fc1 RCX: 0000000000000005
[2158499.700492] RDX: 0000000000000000 RSI: 0000000000000005 RDI: 0000000000000000
[2158499.700515] RBP: ffffc0bd6187fbb0 R08: ffff9f185faf1100 R09: 0000000000000000
[2158499.700538] R10: ffff9f1ea7da2cc0 R11: 000000005ed8cec8 R12: ffffc0bd6187fc28
[2158499.700561] R13: ffff9f15feb8d000 R14: ffff9f1ea7da2fc0 R15: ffff9f168dc0d740
[2158499.700585] FS: 0000000000000000(0000) GS:ffff9f185fac0000(0000) knlGS:0000000000000000
[2158499.700610] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[2158499.700630] CR2: 00007fdd94fca238 CR3: 0000000809d8c006 CR4: 00000000003706e0
[2158499.700702] Call Trace:
[2158499.700741] ? key_alloc+0x447/0x4b0
[2158499.700768] ? __key_link_begin+0x43/0xa0
[2158499.700790] __key_link_begin+0x43/0xa0
[2158499.700814] request_key_and_link+0x2c7/0x730
[2158499.700847] ? dns_resolver_read+0x20/0x20 [dns_resolver]
[2158499.700873] ? key_default_cmp+0x20/0x20
[2158499.700898] request_key_tag+0x43/0xa0
[2158499.700926] dns_query+0x114/0x2ca [dns_resolver]
[2158499.701127] dns_resolve_server_name_to_ip+0x194/0x310 [cifs]
[2158499.701164] ? scnprintf+0x49/0x90
[2158499.701190] ? __switch_to_asm+0x40/0x70
[2158499.701211] ? __switch_to_asm+0x34/0x70
[2158499.701405] reconn_set_ipaddr_from_hostname+0x81/0x2a0 [cifs]
[2158499.701603] cifs_resolve_server+0x4b/0xd0 [cifs]
[2158499.701632] process_one_work+0x1f8/0x3e0
[2158499.701658] worker_thread+0x2d/0x3f0
[2158499.701682] ? process_one_work+0x3e0/0x3e0
[2158499.701703] kthread+0x10d/0x130
[2158499.701723] ? kthread_park+0xb0/0xb0
[2158499.701746] ret_from_fork+0x1f/0x40
The situation occurs as follows:
* Some kernel facility invokes dns_query() to resolve a hostname, for
example, "abcdef". The function registers its global DNS resolver
cache as current->cred.thread_keyring and passes the query to
request_key_net() -> request_key_tag() -> request_key_and_link().
* Function request_key_and_link() creates a keyring_search_context
object. Its match_data.cmp method gets set via a call to
type->match_preparse() (resolves to dns_resolver_match_preparse()) to
dns_resolver_cmp().
* Function request_key_and_link() continues and invokes
search_process_keyrings_rcu() which returns that a given key was not
found. The control is then passed to request_key_and_link() ->
construct_alloc_key().
* Concurrently to that, a second task similarly makes a DNS query for
"abcdef." and its result gets inserted into the DNS resolver cache.
* Back on the first task, function construct_alloc_key() first runs
__key_link_begin() to determine an assoc_array_edit operation to
insert a new key. Index keys in the array are compared exactly as-is,
using keyring_compare_object(). The operation
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: fix memory leak in mlx5e_ptp_open
When kvzalloc_node or kvzalloc failed in mlx5e_ptp_open, the memory
pointed by "c" or "cparams" is not freed, which can lead to a memory
leak. Fix by freeing the array in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx4: Prevent shift wrapping in set_user_sq_size()
The ucmd->log_sq_bb_count variable is controlled by the user so this
shift can wrap. Fix it by using check_shl_overflow() in the same way
that it was done in commit 515f60004ed9 ("RDMA/hns: Prevent undefined
behavior in hns_roce_set_user_sq_size()"). |
| In the Linux kernel, the following vulnerability has been resolved:
m68k: mm: Move initrd phys_to_virt handling after paging_init()
When booting with an initial ramdisk on platforms where physical memory
does not start at address zero (e.g. on Amiga):
initrd: 0ef0602c - 0f800000
Zone ranges:
DMA [mem 0x0000000008000000-0x000000f7ffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000008000000-0x000000000f7fffff]
Initmem setup node 0 [mem 0x0000000008000000-0x000000000f7fffff]
Unable to handle kernel access at virtual address (ptrval)
Oops: 00000000
Modules linked in:
PC: [<00201d3c>] memcmp+0x28/0x56
As phys_to_virt() relies on m68k_memoffset and module_fixup(), it must
not be called before paging_init(). Hence postpone the phys_to_virt
handling for the initial ramdisk until after calling paging_init().
While at it, reduce #ifdef clutter by using IS_ENABLED() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
igc: Fix Kernel Panic during ndo_tx_timeout callback
The Xeon validation group has been carrying out some loaded tests
with various HW configurations, and they have seen some transmit
queue time out happening during the test. This will cause the
reset adapter function to be called by igc_tx_timeout().
Similar race conditions may arise when the interface is being brought
down and up in igc_reinit_locked(), an interrupt being generated, and
igc_clean_tx_irq() being called to complete the TX.
When the igc_tx_timeout() function is invoked, this patch will turn
off all TX ring HW queues during igc_down() process. TX ring HW queues
will be activated again during the igc_configure_tx_ring() process
when performing the igc_up() procedure later.
This patch also moved existing igc_disable_tx_ring_hw() to avoid using
forward declaration.
Kernel trace:
[ 7678.747813] ------------[ cut here ]------------
[ 7678.757914] NETDEV WATCHDOG: enp1s0 (igc): transmit queue 2 timed out
[ 7678.770117] WARNING: CPU: 0 PID: 13 at net/sched/sch_generic.c:525 dev_watchdog+0x1ae/0x1f0
[ 7678.784459] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype nft_compat
nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO) rktpm(PO)
cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO) svfs_pci_hotplug(PO)
vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO) svheartbeat(PO) ioapic(PO)
sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO) smbus(PO) spiflash_cdf(PO) arden(PO)
dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO) pch(PO) sviotargets(PO) svbdf(PO) svmem(PO)
svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO) svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO)
fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O) ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO)
regsupport(O) libnvdimm nls_cp437 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel
snd_intel_dspcfg snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci
[ 7678.784496] input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm fuse backlight
configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic pegasus mmc_block usbhid
mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa scsi_transport_sas e1000e e1000 e100 ax88179_178a
usbnet xhci_pci sd_mod xhci_hcd t10_pi crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore
crct10dif_generic ptp crct10dif_common usb_common pps_core
[ 7679.200403] RIP: 0010:dev_watchdog+0x1ae/0x1f0
[ 7679.210201] Code: 28 e9 53 ff ff ff 4c 89 e7 c6 05 06 42 b9 00 01 e8 17 d1 fb ff 44 89 e9 4c
89 e6 48 c7 c7 40 ad fb 81 48 89 c2 e8 52 62 82 ff <0f> 0b e9 72 ff ff ff 65 8b 05 80 7d 7c 7e
89 c0 48 0f a3 05 0a c1
[ 7679.245438] RSP: 0018:ffa00000001f7d90 EFLAGS: 00010282
[ 7679.256021] RAX: 0000000000000000 RBX: ff11000109938440 RCX: 0000000000000000
[ 7679.268710] RDX: ff11000361e26cd8 RSI: ff11000361e1b880 RDI: ff11000361e1b880
[ 7679.281314] RBP: ffa00000001f7da8 R08: ff1100035f8fffe8 R09: 0000000000027ffb
[ 7679.293840] R10: 0000000000001f0a R11: ff1100035f840000 R12: ff11000109938000
[ 7679.306276] R13: 0000000000000002 R14: dead000000000122 R15: ffa00000001f7e18
[ 7679.318648] FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000
[ 7679.332064] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7679.342757] CR2: 00007ffff7fca168 CR3: 000000013b08a006 CR4: 0000000000471ef8
[ 7679.354984] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 7679.367207] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 7679.379370] PKRU: 55555554
[ 7679.386446] Call Trace:
[ 7679.393152] <TASK>
[ 7679.399363] ? __pfx_dev_watchdog+0x10/0x10
[ 7679.407870] call_timer_fn+0x31/0x110
[ 7679.415698] e
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
zsmalloc: move LRU update from zs_map_object() to zs_malloc()
Under memory pressure, we sometimes observe the following crash:
[ 5694.832838] ------------[ cut here ]------------
[ 5694.842093] list_del corruption, ffff888014b6a448->next is LIST_POISON1 (dead000000000100)
[ 5694.858677] WARNING: CPU: 33 PID: 418824 at lib/list_debug.c:47 __list_del_entry_valid+0x42/0x80
[ 5694.961820] CPU: 33 PID: 418824 Comm: fuse_counters.s Kdump: loaded Tainted: G S 5.19.0-0_fbk3_rc3_hoangnhatpzsdynshrv41_10870_g85a9558a25de #1
[ 5694.990194] Hardware name: Wiwynn Twin Lakes MP/Twin Lakes Passive MP, BIOS YMM16 05/24/2021
[ 5695.007072] RIP: 0010:__list_del_entry_valid+0x42/0x80
[ 5695.017351] Code: 08 48 83 c2 22 48 39 d0 74 24 48 8b 10 48 39 f2 75 2c 48 8b 51 08 b0 01 48 39 f2 75 34 c3 48 c7 c7 55 d7 78 82 e8 4e 45 3b 00 <0f> 0b eb 31 48 c7 c7 27 a8 70 82 e8 3e 45 3b 00 0f 0b eb 21 48 c7
[ 5695.054919] RSP: 0018:ffffc90027aef4f0 EFLAGS: 00010246
[ 5695.065366] RAX: 41fe484987275300 RBX: ffff888008988180 RCX: 0000000000000000
[ 5695.079636] RDX: ffff88886006c280 RSI: ffff888860060480 RDI: ffff888860060480
[ 5695.093904] RBP: 0000000000000002 R08: 0000000000000000 R09: ffffc90027aef370
[ 5695.108175] R10: 0000000000000000 R11: ffffffff82fdf1c0 R12: 0000000010000002
[ 5695.122447] R13: ffff888014b6a448 R14: ffff888014b6a420 R15: 00000000138dc240
[ 5695.136717] FS: 00007f23a7d3f740(0000) GS:ffff888860040000(0000) knlGS:0000000000000000
[ 5695.152899] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5695.164388] CR2: 0000560ceaab6ac0 CR3: 000000001c06c001 CR4: 00000000007706e0
[ 5695.178659] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 5695.192927] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 5695.207197] PKRU: 55555554
[ 5695.212602] Call Trace:
[ 5695.217486] <TASK>
[ 5695.221674] zs_map_object+0x91/0x270
[ 5695.229000] zswap_frontswap_store+0x33d/0x870
[ 5695.237885] ? do_raw_spin_lock+0x5d/0xa0
[ 5695.245899] __frontswap_store+0x51/0xb0
[ 5695.253742] swap_writepage+0x3c/0x60
[ 5695.261063] shrink_page_list+0x738/0x1230
[ 5695.269255] shrink_lruvec+0x5ec/0xcd0
[ 5695.276749] ? shrink_slab+0x187/0x5f0
[ 5695.284240] ? mem_cgroup_iter+0x6e/0x120
[ 5695.292255] shrink_node+0x293/0x7b0
[ 5695.299402] do_try_to_free_pages+0xea/0x550
[ 5695.307940] try_to_free_pages+0x19a/0x490
[ 5695.316126] __folio_alloc+0x19ff/0x3e40
[ 5695.323971] ? __filemap_get_folio+0x8a/0x4e0
[ 5695.332681] ? walk_component+0x2a8/0xb50
[ 5695.340697] ? generic_permission+0xda/0x2a0
[ 5695.349231] ? __filemap_get_folio+0x8a/0x4e0
[ 5695.357940] ? walk_component+0x2a8/0xb50
[ 5695.365955] vma_alloc_folio+0x10e/0x570
[ 5695.373796] ? walk_component+0x52/0xb50
[ 5695.381634] wp_page_copy+0x38c/0xc10
[ 5695.388953] ? filename_lookup+0x378/0xbc0
[ 5695.397140] handle_mm_fault+0x87f/0x1800
[ 5695.405157] do_user_addr_fault+0x1bd/0x570
[ 5695.413520] exc_page_fault+0x5d/0x110
[ 5695.421017] asm_exc_page_fault+0x22/0x30
After some investigation, I have found the following issue: unlike other
zswap backends, zsmalloc performs the LRU list update at the object
mapping time, rather than when the slot for the object is allocated.
This deviation was discussed and agreed upon during the review process
of the zsmalloc writeback patch series:
https://lore.kernel.org/lkml/Y3flcAXNxxrvy3ZH@cmpxchg.org/
Unfortunately, this introduces a subtle bug that occurs when there is a
concurrent store and reclaim, which interleave as follows:
zswap_frontswap_store() shrink_worker()
zs_malloc() zs_zpool_shrink()
spin_lock(&pool->lock) zs_reclaim_page()
zspage = find_get_zspage()
spin_unlock(&pool->lock)
spin_lock(&pool->lock)
zspage = list_first_entry(&pool->lru)
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: fix iso_conn related locking and validity issues
sk->sk_state indicates whether iso_pi(sk)->conn is valid. Operations
that check/update sk_state and access conn should hold lock_sock,
otherwise they can race.
The order of taking locks is hci_dev_lock > lock_sock > iso_conn_lock,
which is how it is in connect/disconnect_cfm -> iso_conn_del ->
iso_chan_del.
Fix locking in iso_connect_cis/bis and sendmsg/recvmsg to take lock_sock
around updating sk_state and conn.
iso_conn_del must not occur during iso_connect_cis/bis, as it frees the
iso_conn. Hold hdev->lock longer to prevent that.
This should not reintroduce the issue fixed in commit 241f51931c35
("Bluetooth: ISO: Avoid circular locking dependency"), since the we
acquire locks in order. We retain the fix in iso_sock_connect to release
lock_sock before iso_connect_* acquires hdev->lock.
Similarly for commit 6a5ad251b7cd ("Bluetooth: ISO: Fix possible
circular locking dependency"). We retain the fix in iso_conn_ready to
not acquire iso_conn_lock before lock_sock.
iso_conn_add shall return iso_conn with valid hcon. Make it so also when
reusing an old CIS connection waiting for disconnect timeout (see
__iso_sock_close where conn->hcon is set to NULL).
Trace with iso_conn_del after iso_chan_add in iso_connect_cis:
===============================================================
iso_sock_create:771: sock 00000000be9b69b7
iso_sock_init:693: sk 000000004dff667e
iso_sock_bind:827: sk 000000004dff667e 70:1a:b8:98:ff:a2 type 1
iso_sock_setsockopt:1289: sk 000000004dff667e
iso_sock_setsockopt:1289: sk 000000004dff667e
iso_sock_setsockopt:1289: sk 000000004dff667e
iso_sock_connect:875: sk 000000004dff667e
iso_connect_cis:353: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da
hci_get_route:1199: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da
hci_conn_add:1005: hci0 dst 28:3d:c2:4a:7e:da
iso_conn_add:140: hcon 000000007b65d182 conn 00000000daf8625e
__iso_chan_add:214: conn 00000000daf8625e
iso_connect_cfm:1700: hcon 000000007b65d182 bdaddr 28:3d:c2:4a:7e:da status 12
iso_conn_del:187: hcon 000000007b65d182 conn 00000000daf8625e, err 16
iso_sock_clear_timer:117: sock 000000004dff667e state 3
<Note: sk_state is BT_BOUND (3), so iso_connect_cis is still
running at this point>
iso_chan_del:153: sk 000000004dff667e, conn 00000000daf8625e, err 16
hci_conn_del:1151: hci0 hcon 000000007b65d182 handle 65535
hci_conn_unlink:1102: hci0: hcon 000000007b65d182
hci_chan_list_flush:2780: hcon 000000007b65d182
iso_sock_getsockopt:1376: sk 000000004dff667e
iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e
iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e
iso_sock_getsockopt:1376: sk 000000004dff667e
iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e
iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e
iso_sock_shutdown:1434: sock 00000000be9b69b7, sk 000000004dff667e, how 1
__iso_sock_close:632: sk 000000004dff667e state 5 socket 00000000be9b69b7
<Note: sk_state is BT_CONNECT (5), even though iso_chan_del sets
BT_CLOSED (6). Only iso_connect_cis sets it to BT_CONNECT, so it
must be that iso_chan_del occurred between iso_chan_add and end of
iso_connect_cis.>
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 8000000006467067 P4D 8000000006467067 PUD 3f5f067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
RIP: 0010:__iso_sock_close (net/bluetooth/iso.c:664) bluetooth
===============================================================
Trace with iso_conn_del before iso_chan_add in iso_connect_cis:
===============================================================
iso_connect_cis:356: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da
...
iso_conn_add:140: hcon 0000000093bc551f conn 00000000768ae504
hci_dev_put:1487: hci0 orig refcnt 21
hci_event_packet:7607: hci0: e
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
dm integrity: Fix UAF in dm_integrity_dtr()
Dm_integrity also has the same UAF problem when dm_resume()
and dm_destroy() are concurrent.
Therefore, cancelling timer again in dm_integrity_dtr(). |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio()
q6v5_wcss_init_mmio() will call platform_get_resource_byname() that may
fail and return NULL. devm_ioremap() will use res->start as input, which
may causes null-ptr-deref. Check the ret value of
platform_get_resource_byname() to avoid the null-ptr-deref. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: core: fix unbalanced of node refcount in regulator_dev_lookup()
I got the the following report:
OF: ERROR: memory leak, expected refcount 1 instead of 2,
of_node_get()/of_node_put() unbalanced - destroy cset entry:
attach overlay node /i2c/pmic@62/regulators/exten
In of_get_regulator(), the node is returned from of_parse_phandle()
with refcount incremented, after using it, of_node_put() need be called. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: toshsd: fix return value check of mmc_add_host()
mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.
So fix this by checking the return value and goto error path which will call
mmc_free_host(), besides, free_irq() also needs be called. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix NULL-ptr-deref in rxe_qp_do_cleanup() when socket create failed
There is a null-ptr-deref when mount.cifs over rdma:
BUG: KASAN: null-ptr-deref in rxe_qp_do_cleanup+0x2f3/0x360 [rdma_rxe]
Read of size 8 at addr 0000000000000018 by task mount.cifs/3046
CPU: 2 PID: 3046 Comm: mount.cifs Not tainted 6.1.0-rc5+ #62
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc3
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
kasan_report+0xad/0x130
rxe_qp_do_cleanup+0x2f3/0x360 [rdma_rxe]
execute_in_process_context+0x25/0x90
__rxe_cleanup+0x101/0x1d0 [rdma_rxe]
rxe_create_qp+0x16a/0x180 [rdma_rxe]
create_qp.part.0+0x27d/0x340
ib_create_qp_kernel+0x73/0x160
rdma_create_qp+0x100/0x230
_smbd_get_connection+0x752/0x20f0
smbd_get_connection+0x21/0x40
cifs_get_tcp_session+0x8ef/0xda0
mount_get_conns+0x60/0x750
cifs_mount+0x103/0xd00
cifs_smb3_do_mount+0x1dd/0xcb0
smb3_get_tree+0x1d5/0x300
vfs_get_tree+0x41/0xf0
path_mount+0x9b3/0xdd0
__x64_sys_mount+0x190/0x1d0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
The root cause of the issue is the socket create failed in
rxe_qp_init_req().
So move the reset rxe_qp_do_cleanup() after the NULL ptr check. |
