| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Kavita is a cross platform reading server. Prior to 0.9.0, the ReaderController.GetImage endpoint is decorated with [AllowAnonymous], allowing completely unauthenticated access to page images from any chapter in any library. While the endpoint accepts an apiKey parameter, it is never validated. Since entity IDs are sequential integers, an unauthenticated attacker can trivially enumerate all content on the server. This vulnerability is fixed in 0.9.0. |
| Allocation of Resources Without Limits or Throttling vulnerability in benoitc hackney allows Flooding. The URL parser in src/hackney_url.erl converts every unrecognized URL scheme to a permanent BEAM atom via binary_to_atom/2. BEAM atoms are never garbage-collected and the atom table defaults to a hard limit of 1,048,576 entries. An attacker who can supply URLs with attacker-chosen scheme prefixes — directly as request targets, as configured webhook URLs, or via Location headers followed during redirects — can exhaust the atom table and crash the entire BEAM VM with system_limit.
This issue affects hackney: from 2.0.0 before 4.0.1. |
| Interpretation Conflict vulnerability in benoitc hackney allows Server Side Request Forgery. hackney_url:normalize/2 URL-decodes the host component after the URL has been parsed into a #hackney_url{} record. OTP's uri_string:parse/1 and inet:parse_address/1 do not decode percent-escapes in the host, so a URL such as http://%31%32%37%2E%30%2E%30%2E%31/ is seen by a caller's allowlist validator with host %31%32%37%2E%30%2E%30%2E%31 (not an IP address), which passes the allowlist check. hackney's normalizer then decodes the host to 127.0.0.1 and opens a TCP connection to loopback. Because hackney:request/5 always calls hackney_url:normalize/2 with no opt-out, every request that takes a binary or list URL is affected. The same technique reaches cloud instance metadata services (169.254.169.254), RFC1918 networks, and any admin interface listening on localhost.
This issue affects hackney: from 0.13.0 before 4.0.1. |
| IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 for Linux, UNIX and Windows (includes DB2 Connect Server) stores potentially sensitive information in log files that could be read by a local user. |
| A flaw has been found in omec-project amf up to 2.1.1. Affected by this issue is the function PDUSessionResourceModifyIndication of the file /go/src/amf/ngap/handler.go. This manipulation causes memory corruption. Remote exploitation of the attack is possible. The exploit has been published and may be used. Applying a patch is the recommended action to fix this issue. |
| NVIDIA Isaac Launchable for Linux contains a vulnerability where sensitive information is transmitted in clear text. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, information disclosure, and data tampering. |
| Algernon is a small self-contained pure-Go web server. Prior to 1.17.6, in engine/luahandler.go, the sync.RWMutex protecting LoadCommonFunctions is released before L.Push() and L.PCall() execute. Since gopher-lua's LState is explicitly not goroutine-safe, concurrent requests race on the shared state causing Lua VM corruption. The Go race detector confirms this immediately under modest concurrency (ab -n 1000 -c 100). This vulnerability is fixed in 1.17.6. |
| Improper Authorization vulnerability in nerves-hub nerves_hub_web allows cross-organization device control via device bulk actions and device update API.
Missing authorization checks in the device bulk actions and device update API endpoints allow authenticated users to target devices belonging to other organizations and perform actions outside of their privilege level.
An attacker can select devices outside of their organization by manipulating device identifiers and perform management actions on them, such as moving them to products they control. This may allow attackers to interfere with firmware updates, access device functionality exposed by the platform, or disrupt device connectivity.
In environments where additional features such as remote console access are enabled, this could lead to full compromise of affected devices.
This issue affects nerves_hub_web: from 1.0.0 before 2.4.0. |
| A security flaw has been discovered in Edimax BR-6428NS 1.10. This affects the function formWirelessTbl of the file /goform/formWirelessTbl of the component POST Request Handler. Performing a manipulation of the argument vapurl results in buffer overflow. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| Bugsink is a self-hosted error tracking tool. Prior to 2.2.0, In affected versions, the issue list view authorizes access through the project in the URL, but applies the requested bulk action to the submitted issue IDs without also requiring those issues to belong to that project. This vulnerability is fixed in 2.2.0. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in gleam-wisp wisp allows arbitrary file read via percent-encoded path traversal.
The wisp.serve_static function is vulnerable to path traversal because sanitization runs before percent-decoding. The encoded sequence %2e%2e passes through string.replace unchanged, then uri.percent_decode converts it to .., which the OS resolves as directory traversal when the file is read.
An unauthenticated attacker can read any file readable by the application process in a single HTTP request, including application source code, configuration files, secrets, and system files.
This issue affects wisp: from 2.1.1 before 2.2.1. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: Fix recursive locking in __configfs_open_file()
In flush_write_buffer, &p->frag_sem is acquired and then the loaded store
function is called, which, here, is target_core_item_dbroot_store(). This
function called filp_open(), following which these functions were called
(in reverse order), according to the call trace:
down_read
__configfs_open_file
do_dentry_open
vfs_open
do_open
path_openat
do_filp_open
file_open_name
filp_open
target_core_item_dbroot_store
flush_write_buffer
configfs_write_iter
target_core_item_dbroot_store() tries to validate the new file path by
trying to open the file path provided to it; however, in this case, the bug
report shows:
db_root: not a directory: /sys/kernel/config/target/dbroot
indicating that the same configfs file was tried to be opened, on which it
is currently working on. Thus, it is trying to acquire frag_sem semaphore
of the same file of which it already holds the semaphore obtained in
flush_write_buffer(), leading to acquiring the semaphore in a nested manner
and a possibility of recursive locking.
Fix this by modifying target_core_item_dbroot_store() to use kern_path()
instead of filp_open() to avoid opening the file using filesystem-specific
function __configfs_open_file(), and further modifying it to make this fix
compatible. |
| Files or directories accessible to external parties vulnerability in redis-server component in Synology BeeDrive for desktop before 1.3.2-13814 allows local users to conduct denial-of-service attacks via unspecified vectors. |
| Lack of output escaping leads to a XSS vector in the feed modules. |
| Lack of output escaping leads to a XSS vector in the multilingual associations component. |
| Access control failure means that an application does not effectively check user access permissions, so that unauthorized users can access system data beyond their permissions, such as viewing and modifying configuration information. |
| Incorrect Default Permissions vulnerability in AIRBUS PSS TETRA Connectivity Server on Windows Server OS allows Privilege Abuse.
An attacker may execute arbitrary code with SYSTEM privileges if a user is tricked or directed to place a crafted file into the vulnerable directory.
This issue affects TETRA connectivity Server: 7.0.
Vulnerability fix is available and delivered to impacted customers. |
| Cross-site request forgery (CSRF) vulnerabilities allow attackers to exploit a user's authenticated session to forge cross-site requests, inducing the execution of unintended operations such as tampering with configuration data. |
| When the director sends a long-running request (e.g. compile_package), the agent's reply JSON is consumed by AgentClient. inject_compile_log (line 332-339) reads response['value']['result']['compile_log_id'] and format_exception (line 318-325) reads exception['blobstore_id']; both pass the agent-supplied string unmodified to download_and_delete_blob(blob_id) (line 344-349), which calls @resource_manager.get_resource(blob_id) and, in an ensure block, @resource_manager.delete_resource(blob_id). Api::ResourceManager forwards the id straight to blobstore.get(id) / blobstore.delete(id). When the director is configured with the local blobstore provider, Blobstore::LocalClient#object_file_path(oid) is File.join(@blobstore_path, oid) (local_client.rb:54-56) with no normalisation, so oid = "../../jobs/director/config/director.yml" resolves outside the blobstore root.
Affected versions:
BOSH Director: All versions prior to v282.1.12 |
| A vulnerability was determined in QianFox FoxCMS up to 1.2.6. The impacted element is an unknown function of the file /Tag/edit of the component Administrator Backend. Executing a manipulation can lead to cross site scripting. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet. |
