| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Yadea T5 Electric Bicycles (models manufactured in/after 2024) have a weak authentication mechanism in their keyless entry system. The system utilizes the EV1527 fixed-code RF protocol without implementing rolling codes or cryptographic challenge-response mechanisms. This is vulnerable to signal forgery after a local attacker intercepts any legitimate key fob transmission, allowing for complete unauthorized vehicle operation via a replay attack. |
| A path Traversal vulnerability exists in Ziostation2 v2.9.8.7 and earlier. A remote unauthenticated attacker may get sensitive information on the operating system. |
| A vulnerability has been found in aligungr UERANSIM up to 3.2.7. The affected element is the function rls::DecodeRlsMessage in the library src/lib/rls/rls_pdu.cpp of the component Radio Link Simulation Layer. The manipulation of the argument pduLength leads to uncaught exception. The attack may be initiated remotely. Upgrading to version 3.2.8 is sufficient to fix this issue. The identifier of the patch is ca1a66fffe282767bb08618af9f848e3b68ea47b. It is suggested to upgrade the affected component. This behavior is related to CVE-2024-37877. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| In the Linux kernel, the following vulnerability has been resolved:
usbip: validate number_of_packets in usbip_pack_ret_submit()
When a USB/IP client receives a RET_SUBMIT response,
usbip_pack_ret_submit() unconditionally overwrites
urb->number_of_packets from the network PDU. This value is
subsequently used as the loop bound in usbip_recv_iso() and
usbip_pad_iso() to iterate over urb->iso_frame_desc[], a flexible
array whose size was fixed at URB allocation time based on the
*original* number_of_packets from the CMD_SUBMIT.
A malicious USB/IP server can set number_of_packets in the response
to a value larger than what was originally submitted, causing a heap
out-of-bounds write when usbip_recv_iso() writes to
urb->iso_frame_desc[i] beyond the allocated region.
KASAN confirmed this with kernel 7.0.0-rc5:
BUG: KASAN: slab-out-of-bounds in usbip_recv_iso+0x46a/0x640
Write of size 4 at addr ffff888106351d40 by task vhci_rx/69
The buggy address is located 0 bytes to the right of
allocated 320-byte region [ffff888106351c00, ffff888106351d40)
The server side (stub_rx.c) and gadget side (vudc_rx.c) already
validate number_of_packets in the CMD_SUBMIT path since commits
c6688ef9f297 ("usbip: fix stub_rx: harden CMD_SUBMIT path to handle
malicious input") and b78d830f0049 ("usbip: fix vudc_rx: harden
CMD_SUBMIT path to handle malicious input"). The server side validates
against USBIP_MAX_ISO_PACKETS because no URB exists yet at that point.
On the client side we have the original URB, so we can use the tighter
bound: the response must not exceed the original number_of_packets.
This mirrors the existing validation of actual_length against
transfer_buffer_length in usbip_recv_xbuff(), which checks the
response value against the original allocation size.
Kelvin Mbogo's series ("usb: usbip: fix integer overflow in
usbip_recv_iso()", v2) hardens the receive-side functions themselves;
this patch complements that work by catching the bad value at its
source -- in usbip_pack_ret_submit() before the overwrite -- and
using the tighter per-URB allocation bound rather than the global
USBIP_MAX_ISO_PACKETS limit.
Fix this by checking rpdu->number_of_packets against
urb->number_of_packets in usbip_pack_ret_submit() before the
overwrite. On violation, clamp to zero so that usbip_recv_iso() and
usbip_pad_iso() safely return early. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Validate PDU length before reading SDU length in l2cap_ecred_data_rcv()
l2cap_ecred_data_rcv() reads the SDU length field from skb->data using
get_unaligned_le16() without first verifying that skb contains at least
L2CAP_SDULEN_SIZE (2) bytes. When skb->len is less than 2, this reads
past the valid data in the skb.
The ERTM reassembly path correctly calls pskb_may_pull() before reading
the SDU length (l2cap_reassemble_sdu, L2CAP_SAR_START case). Apply the
same validation to the Enhanced Credit Based Flow Control data path. |
| SQL Injection vulnerability exists in Sourcecodester Online Job Portal phppdo 1.0 ivia the category parameter in /jobportal/index.php. |
| In the Linux kernel, the following vulnerability has been resolved:
udp: Fix wildcard bind conflict check when using hash2
When binding a udp_sock to a local address and port, UDP uses
two hashes (udptable->hash and udptable->hash2) for collision
detection. The current code switches to "hash2" when
hslot->count > 10.
"hash2" is keyed by local address and local port.
"hash" is keyed by local port only.
The issue can be shown in the following bind sequence (pseudo code):
bind(fd1, "[fd00::1]:8888")
bind(fd2, "[fd00::2]:8888")
bind(fd3, "[fd00::3]:8888")
bind(fd4, "[fd00::4]:8888")
bind(fd5, "[fd00::5]:8888")
bind(fd6, "[fd00::6]:8888")
bind(fd7, "[fd00::7]:8888")
bind(fd8, "[fd00::8]:8888")
bind(fd9, "[fd00::9]:8888")
bind(fd10, "[fd00::10]:8888")
/* Correctly return -EADDRINUSE because "hash" is used
* instead of "hash2". udp_lib_lport_inuse() detects the
* conflict.
*/
bind(fail_fd, "[::]:8888")
/* After one more socket is bound to "[fd00::11]:8888",
* hslot->count exceeds 10 and "hash2" is used instead.
*/
bind(fd11, "[fd00::11]:8888")
bind(fail_fd, "[::]:8888") /* succeeds unexpectedly */
The same issue applies to the IPv4 wildcard address "0.0.0.0"
and the IPv4-mapped wildcard address "::ffff:0.0.0.0". For
example, if there are existing sockets bound to
"192.168.1.[1-11]:8888", then binding "0.0.0.0:8888" or
"[::ffff:0.0.0.0]:8888" can also miss the conflict when
hslot->count > 10.
TCP inet_csk_get_port() already has the correct check in
inet_use_bhash2_on_bind(). Rename it to
inet_use_hash2_on_bind() and move it to inet_hashtables.h
so udp.c can reuse it in this fix. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix fanout UAF in packet_release() via NETDEV_UP race
`packet_release()` has a race window where `NETDEV_UP` can re-register a
socket into a fanout group's `arr[]` array. The re-registration is not
cleaned up by `fanout_release()`, leaving a dangling pointer in the fanout
array.
`packet_release()` does NOT zero `po->num` in its `bind_lock` section.
After releasing `bind_lock`, `po->num` is still non-zero and `po->ifindex`
still matches the bound device. A concurrent `packet_notifier(NETDEV_UP)`
that already found the socket in `sklist` can re-register the hook.
For fanout sockets, this re-registration calls `__fanout_link(sk, po)`
which adds the socket back into `f->arr[]` and increments `f->num_members`,
but does NOT increment `f->sk_ref`.
The fix sets `po->num` to zero in `packet_release` while `bind_lock` is
held to prevent NETDEV_UP from linking, preventing the race window.
This bug was found following an additional audit with Claude Code based
on CVE-2025-38617. |
| A command injection vulnerability exists in Tenda AC18 V15.03.05.05_multi. The vulnerability is located in the /goform/SetSambaCfg interface, where improper handling of the guestuser parameter allows attackers to execute arbitrary system commands. |
| In the Linux kernel, the following vulnerability has been resolved:
iavf: fix out-of-bounds writes in iavf_get_ethtool_stats()
iavf incorrectly uses real_num_tx_queues for ETH_SS_STATS. Since the
value could change in runtime, we should use num_tx_queues instead.
Moreover iavf_get_ethtool_stats() uses num_active_queues while
iavf_get_sset_count() and iavf_get_stat_strings() use
real_num_tx_queues, which triggers out-of-bounds writes when we do
"ethtool -L" and "ethtool -S" simultaneously [1].
For example when we change channels from 1 to 8, Thread 3 could be
scheduled before Thread 2, and out-of-bounds writes could be triggered
in Thread 3:
Thread 1 (ethtool -L) Thread 2 (work) Thread 3 (ethtool -S)
iavf_set_channels()
...
iavf_alloc_queues()
-> num_active_queues = 8
iavf_schedule_finish_config()
iavf_get_sset_count()
real_num_tx_queues: 1
-> buffer for 1 queue
iavf_get_ethtool_stats()
num_active_queues: 8
-> out-of-bounds!
iavf_finish_config()
-> real_num_tx_queues = 8
Use immutable num_tx_queues in all related functions to avoid the issue.
[1]
BUG: KASAN: vmalloc-out-of-bounds in iavf_add_one_ethtool_stat+0x200/0x270
Write of size 8 at addr ffffc900031c9080 by task ethtool/5800
CPU: 1 UID: 0 PID: 5800 Comm: ethtool Not tainted 6.19.0-enjuk-08403-g8137e3db7f1c #241 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xb0
print_report+0x170/0x4f3
kasan_report+0xe1/0x180
iavf_add_one_ethtool_stat+0x200/0x270
iavf_get_ethtool_stats+0x14c/0x2e0
__dev_ethtool+0x3d0c/0x5830
dev_ethtool+0x12d/0x270
dev_ioctl+0x53c/0xe30
sock_do_ioctl+0x1a9/0x270
sock_ioctl+0x3d4/0x5e0
__x64_sys_ioctl+0x137/0x1c0
do_syscall_64+0xf3/0x690
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7da0e6e36d
...
</TASK>
The buggy address belongs to a 1-page vmalloc region starting at 0xffffc900031c9000 allocated at __dev_ethtool+0x3cc9/0x5830
The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000
index:0xffff88813a013de0 pfn:0x13a013
flags: 0x200000000000000(node=0|zone=2)
raw: 0200000000000000 0000000000000000 dead000000000122 0000000000000000
raw: ffff88813a013de0 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffc900031c8f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900031c9000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffffc900031c9080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
ffffc900031c9100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900031c9180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 |
| Underscore.js is a utility-belt library for JavaScript. Prior to 1.13.8, the _.flatten and _.isEqual functions use recursion without a depth limit. Under very specific conditions, detailed below, an attacker could exploit this in a Denial of Service (DoS) attack by triggering a stack overflow. Untrusted input must be used to create a recursive datastructure, for example using JSON.parse, with no enforced depth limit. The datastructure thus created must be passed to _.flatten or _.isEqual. In the case of _.flatten, the vulnerability can only be exploited if it is possible for a remote client to prepare a datastructure that consists of arrays at all levels AND if no finite depth limit is passed as the second argument to _.flatten. In the case of _.isEqual, the vulnerability can only be exploited if there exists a code path in which two distinct datastructures that were submitted by the same remote client are compared using _.isEqual. For example, if a client submits data that are stored in a database, and the same client can later submit another datastructure that is then compared to the data that were saved in the database previously, OR if a client submits a single request, but its data are parsed twice, creating two non-identical but equivalent datastructures that are then compared. Exceptions originating from the call to _.flatten or _.isEqual, as a result of a stack overflow, are not being caught. This vulnerability is fixed in 1.13.8. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmasp: fix double free of WoL irq
We do not need to free wol_irq since it was instantiated with
devm_request_irq(). So devres will free for us. |
| A null pointer dereference vulnerability exists in the RTSP service of the MERCURY MIPC252W 1.0.5 Build 230306 Rel.79931n. During the processing of a SETUP request for the path rtsp://<IP>:554/stream1/track2, the device fails to properly validate the Transport header field. When this header is improperly constructed, the RTSP service can dereference a NULL pointer during request parsing. Successful exploitation causes the device to crash and automatically reboot. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix double-free of smc_spd_priv when tee() duplicates splice pipe buffer
smc_rx_splice() allocates one smc_spd_priv per pipe_buffer and stores
the pointer in pipe_buffer.private. The pipe_buf_operations for these
buffers used .get = generic_pipe_buf_get, which only increments the page
reference count when tee(2) duplicates a pipe buffer. The smc_spd_priv
pointer itself was not handled, so after tee() both the original and the
cloned pipe_buffer share the same smc_spd_priv *.
When both pipes are subsequently released, smc_rx_pipe_buf_release() is
called twice against the same object:
1st call: kfree(priv) sock_put(sk) smc_rx_update_cons() [correct]
2nd call: kfree(priv) sock_put(sk) smc_rx_update_cons() [UAF]
KASAN reports a slab-use-after-free in smc_rx_pipe_buf_release(), which
then escalates to a NULL-pointer dereference and kernel panic via
smc_rx_update_consumer() when it chases the freed priv->smc pointer:
BUG: KASAN: slab-use-after-free in smc_rx_pipe_buf_release+0x78/0x2a0
Read of size 8 at addr ffff888004a45740 by task smc_splice_tee_/74
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_report+0xce/0x650
kasan_report+0xc6/0x100
smc_rx_pipe_buf_release+0x78/0x2a0
free_pipe_info+0xd4/0x130
pipe_release+0x142/0x160
__fput+0x1c6/0x490
__x64_sys_close+0x4f/0x90
do_syscall_64+0xa6/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
BUG: kernel NULL pointer dereference, address: 0000000000000020
RIP: 0010:smc_rx_update_consumer+0x8d/0x350
Call Trace:
<TASK>
smc_rx_pipe_buf_release+0x121/0x2a0
free_pipe_info+0xd4/0x130
pipe_release+0x142/0x160
__fput+0x1c6/0x490
__x64_sys_close+0x4f/0x90
do_syscall_64+0xa6/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Kernel panic - not syncing: Fatal exception
Beyond the memory-safety problem, duplicating an SMC splice buffer is
semantically questionable: smc_rx_update_cons() would advance the
consumer cursor twice for the same data, corrupting receive-window
accounting. A refcount on smc_spd_priv could fix the double-free, but
the cursor-accounting issue would still need to be addressed separately.
The .get callback is invoked by both tee(2) and splice_pipe_to_pipe()
for partial transfers; both will now return -EFAULT. Users who need
to duplicate SMC socket data must use a copy-based read path. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: fix circular locking dependency in nci_close_device
nci_close_device() flushes rx_wq and tx_wq while holding req_lock.
This causes a circular locking dependency because nci_rx_work()
running on rx_wq can end up taking req_lock too:
nci_rx_work -> nci_rx_data_packet -> nci_data_exchange_complete
-> __sk_destruct -> rawsock_destruct -> nfc_deactivate_target
-> nci_deactivate_target -> nci_request -> mutex_lock(&ndev->req_lock)
Move the flush of rx_wq after req_lock has been released.
This should safe (I think) because NCI_UP has already been cleared
and the transport is closed, so the work will see it and return
-ENETDOWN.
NIPA has been hitting this running the nci selftest with a debug
kernel on roughly 4% of the runs. |
| OpenClaw before 2026.3.31 contains insufficient environment variable sanitization in host exec operations, failing to filter package, registry, Docker, compiler, and TLS override variables. Attackers can exploit this by injecting malicious environment variables to override critical system configurations and compromise host execution integrity. |
| A flaw was found in the X.Org X server's XKB key types request validation. A local attacker could send a specially crafted request to the X server, leading to an out-of-bounds memory access vulnerability. This could result in the disclosure of sensitive information or cause the server to crash, leading to a Denial of Service (DoS). In certain configurations, higher impact outcomes may be possible. |
| A flaw was found in the X.Org X server. This use-after-free vulnerability occurs in the XSYNC fence triggering logic, specifically within the miSyncTriggerFence() function. An attacker with access to the X11 server can exploit this without user interaction, leading to a server crash and potentially enabling memory corruption. This could result in a denial of service or further compromise of the system. |
| A flaw was found in the X.Org X server. This integer underflow vulnerability, specifically in the XKB compatibility map handling, allows an attacker with local or remote X11 server access to trigger a buffer read overrun. This can lead to memory-safety violations and potentially a denial of service (DoS) or other severe impacts. |
| A vulnerability was found in D-Link DIR-825M 1.1.12. This issue affects the function sub_414BA8 of the file /boafrm/formWanConfigSetup. The manipulation of the argument submit-url results in buffer overflow. The attack can be executed remotely. The exploit has been made public and could be used. |
