| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
igmp: convert struct ip_sf_list to RCU
Commit 23d2b94043ca ("igmp: Add ip_mc_list lock in ip_check_mc_rcu")
added spin_lock_bh(&im->lock) to ip_check_mc_rcu() to prevent a
use-after-free while iterating im->sources during concurrent deletions.
However, ip_check_mc_rcu() is called from RCU read-side critical
sections in packet receive and route lookup fast paths (e.g.
__mkroute_output(), ip_route_input_rcu(), and __udp4_lib_rcv()).
When igmpv3_send_cr() or igmpv3_send_report() holds &pmc->lock and
calls add_grec() -> igmpv3_newpack() -> ip_route_output_ports(),
an XFRM policy matching a multicast destination triggers
xfrm_tmpl_resolve_one() -> xfrm4_get_saddr() -> __mkroute_output() ->
ip_check_mc_rcu(). This attempts to acquire &im->lock while &pmc->lock
is already held on the same CPU, triggering a lockdep recursive locking
warning / deadlock.
Fix this by converting IPv4 struct ip_sf_list to RCU, mirroring the
IPv6 implementation in net/ipv6/mcast.c:
1. Add struct rcu_head to struct ip_sf_list and annotate sf_next,
sources, and tomb as __rcu pointers.
2. Use rcu_assign_pointer() and kfree_rcu() for list updates and
deletions.
3. Remove spin_lock_bh(&im->lock) from ip_check_mc_rcu() and traverse
im->sources locklessly with for_each_psf_rcu(), reading and writing
counter fields with READ_ONCE() and WRITE_ONCE().
Note: RCU conversion of /proc/net/mcfilter will be done in a
separate patch. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: break unbuffered write when netfs_alloc_subrequest() fails
syzbot reported a null-ptr-deref below [1] following a fault injection in
netfs_alloc_subrequest(). [0]
When netfs_alloc_subrequest() fails, subreq is NULL.
Later, netfs_prepare_write() tries to initialize members of
subreq(e.g., source), the issue in [1] is triggered.
Let's handle the error of netfs_prepare_write() properly.
[0]
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 0
Call Trace:
netfs_alloc_subrequest+0x116/0x3f0
netfs_prepare_write+0x76/0x7b0
netfs_unbuffered_write+0x75c/0x2020
netfs_unbuffered_write_iter_locked+0x7d6/0xa80
netfs_unbuffered_write_iter+0x442/0x720
v9fs_file_write_iter+0xbf/0x100
vfs_write+0x6ac/0x1050
[1]
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
RIP: 0010:netfs_prepare_write+0xbc/0x7b0 fs/netfs/write_issue.c:173
Call Trace:
netfs_unbuffered_write+0x75c/0x2020 fs/netfs/direct_write.c:111
netfs_unbuffered_write_iter_locked+0x7d6/0xa80 fs/netfs/direct_write.c:290
netfs_unbuffered_write_iter+0x442/0x720 fs/netfs/direct_write.c:382
v9fs_file_write_iter+0xbf/0x100 fs/9p/vfs_file.c:409
new_sync_write fs/read_write.c:595 [inline] |
| Privilege escalation due to weak configuration during package extraction process. |
| Improper authorization leads to Remote Code Execution via SocketIO interface. |
| Privilege escalation due to weak configuration while temporary file handling. |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains an Improper Privilege Management vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Unauthorized access. |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains an Improper Restriction of Rendered UI Layers or Frames vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Elevation of privileges and Session theft. |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains an Insufficient Session Expiration vulnerability. A low privileged attacker with adjacent network access could potentially exploit this vulnerability, leading to Elevation of privileges, Protection mechanism bypass, and Unauthorized access. |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains an Improper Certificate Validation vulnerability. An unauthenticated attacker with adjacent network access could potentially exploit this vulnerability, leading to Information disclosure, Information tampering, and Protection mechanism bypass. |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains a Missing Authentication for Critical Function vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Unauthorized access. |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, Versions prior to 5.36, contains a Weak Encoding for Password vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information disclosure, Information tampering, Protection mechanism bypass, and Unauthorized access. |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains an Inclusion of Sensitive Information in Source Code vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Information exposure. |
| Moquette is a lightweight Java MQTT broker. Prior to 0.18.1, when pattern-based ACL rules are configured, AuthorizationsCollector.canDoOperation substitutes client ID and username values directly into rules containing %c or %u and then treats the result as an MQTT topic filter. A client that uses + or # in either identity can broaden the substituted filter and gain cross-tenant read and write access. A # identity can also produce an invalid filter that triggers a NullPointerException in Topic.match and disrupts session processing. This issue is fixed in version 0.18.1. |
| Moquette is a lightweight Java MQTT broker. Prior to 0.18.1, SessionEventLoop.run catches only InterruptedException, and SessionEventLoopGroup does not restart a terminated loop. An MQTT command that raises an uncaught exception can terminate an event loop shared by multiple client sessions, preventing every co-located client from processing PUBLISH, SUBSCRIBE, PUBACK, and other commands. An attacker can select client IDs that map across the available loops to disrupt session processing for the entire broker. This issue is fixed in version 0.18.1. |
| Moquette is a lightweight Java MQTT broker. Prior to 0.18.1, PostOffice.subscribe parses a shared-subscription filter through SharedSubscriptionUtils.extractShareName before validating the complete $share/{shareName}/{topicFilter} structure. A remote client can send a filter such as $share/grp without a topic-filter portion, causing a StringIndexOutOfBoundsException while calculating the share name. The exception terminates command handling on the shared session event loop and can deny service to other client sessions assigned to that loop. This issue is fixed in version 0.18.1. |
| Moquette is a lightweight Java MQTT broker. Prior to 0.18.1, the broker does not enforce a maximum length for pending per-session message queues. When a fast publisher sends messages to a slow subscriber whose in-flight window is full, queued messages can accumulate without bound in memory or persistent storage. Remote clients can use this condition to exhaust broker resources and cause a denial of service. This issue is fixed in version 0.18.1. |
| Moquette is a lightweight Java MQTT broker. Prior to 0.18.1, PostOffice.publishWill publishes a client's Last-Will message without applying the canWrite authorization and reserved-topic checks used for a normal PUBLISH. A client can configure a Will for a topic that the client is not permitted to write and cause the broker to publish the unauthorized message when the client disconnects unexpectedly. This issue allows unauthorized message injection into restricted topics. This issue is fixed in version 0.18.1. |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: Fix potential UAF/KASAN warning
Currently, trace_cachefiles_coherency() is being passed a pointer to a
__be64 lain over the coherency data in struct cachefiles_xattr so that it
can display the first 8 bytes. However, the data is of variable length and
could even be 0 bytes. This could lead to a UAF or KASAN warning.
Fix this by making sure the buffer has room for at least 8 bytes and that
those 8 bytes are pre-cleared.
Further, those bytes are not 8-byte aligned, so fix the tracepoint to
extract the data as four 2-byte words (they are 2-byte aligned) and
reassemble the __be64. The compiler will convert this into a single 8-byte
load where the CPU supports it. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix target device refcount leak in mpi3mr_sas_port_add()
mpi3mr_get_tgtdev_by_addr() increments the target device kref when it
returns a device. If a subsequent error triggers a goto out_fail after
the tgtdev reference is acquired, the reference is never released
because the out_fail path does not call mpi3mr_tgtdev_put(). This
prevents the target device structure from ever being freed.
Add a tgtdev put in the out_fail path, guarded by a NULL check since
tgtdev is only acquired for SAS_END_DEVICE types and the same cleanup
path is shared by earlier error cases where tgtdev is still NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix NULL pointer dereference in mpi3mr_sas_port_add()
sas_port_alloc_num() can return NULL on memory allocation failure. The
return value is passed directly to sas_port_add() without a NULL check,
which causes a NULL pointer dereference.
Additionally, if sas_port_add() fails, the allocated port is not freed
before jumping to out_fail, leaking the sas_port structure. Call
sas_port_free() to properly release it. |
