| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| CWE-400: Uncontrolled Resource Consumption vulnerability exists that could cause a denial of service when an authenticated user sends a specially crafted request to a specific endpoint from within the BMS network. |
| Misskey is an open source, federated social media platform. In affected versions FileServerService (media proxy) in github.com/misskey-dev/misskey 2024.10.1 or earlier did not detect proxy loops, which allows remote actors to execute a self-propagating reflected/amplified distributed denial-of-service via a maliciously crafted note. FileServerService.prototype.proxyHandler did not check incoming requests are not coming from another proxy server. An attacker can execute an amplified denial-of-service by sending a nested proxy request to the server and end the request with a malicious redirect back to another nested proxy request.
Leading to unbounded recursion until the original request is timed out. This issue has been addressed in version 2024.11.0-alpha.3. Users are advised to upgrade. Users unable to upgrade may configure the reverse proxy to block requests to the proxy with an empty User-Agent header or one containing Misskey/. An attacker can not effectively modify the User-Agent header without making another request to the server. |
| An improper resource shutdown or release vulnerability has been identified in the Click Plus C2-03CPU-2 device running firmware version 3.60. The vulnerability allows an unauthenticated attacker to perform a denial-of-service attack by exhausting all available device sessions in the Remote PLC application. |
| An issue was discovered in O-RAN Near Realtime RIC I-Release. To exploit this vulnerability, an attacker can disrupt the initial connection between a gNB and the Near RT-RIC by inundating the system with a high volume of subscription requests via an xApp. |
| A vulnerability was found in Undertow. This issue requires enabling the learning-push handler in the server's config, which is disabled by default, leaving the maxAge config in the handler unconfigured. The default is -1, which makes the handler vulnerable. If someone overwrites that config, the server is not subject to the attack. The attacker needs to be able to reach the server with a normal HTTP request. |
| The dormakaba Saflok system before the November 2023 software update allows an attacker to unlock arbitrary doors at a property via forged keycards, if the attacker has obtained one active or expired keycard for the specific property, aka the "Unsaflok" issue. This occurs, in part, because the key derivation function relies only on a UID. This affects, for example, Saflok MT, and the Confidant, Quantum, RT, and Saffire series. |
| A flaw was found in the QEMU disk image utility (qemu-img) 'info' command. A specially crafted image file containing a `json:{}` value describing block devices in QMP could cause the qemu-img process on the host to consume large amounts of memory or CPU time, leading to denial of service or read/write to an existing external file. |
| On affected platforms running Arista EOS with OSPFv3 configured, a specially crafted packet can cause the OSFPv3 process to have high CPU utilization which may result in the OSFPv3 process being restarted. This may cause disruption in the OSFPv3 routes on the switch.
This issue was discovered internally by Arista and is not aware of any malicious uses of this issue in customer networks. |
| A vulnerability, which was classified as problematic, has been found in Khronos Group glslang 15.1.0. Affected by this issue is the function glslang::TIntermediate::isConversionAllowed of the file glslang/MachineIndependent/Intermediate.cpp. The manipulation leads to null pointer dereference. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. |
| Multer is a node.js middleware for handling `multipart/form-data`. Versions prior to 2.0.0 are vulnerable to a resource exhaustion and memory leak issue due to improper stream handling. When the HTTP request stream emits an error, the internal `busboy` stream is not closed, violating Node.js stream safety guidance. This leads to unclosed streams accumulating over time, consuming memory and file descriptors. Under sustained or repeated failure conditions, this can result in denial of service, requiring manual server restarts to recover. All users of Multer handling file uploads are potentially impacted. Users should upgrade to 2.0.0 to receive a patch. No known workarounds are available. |
| An attacker may cause an HTTP/2 endpoint to read arbitrary amounts of header data by sending an excessive number of CONTINUATION frames. Maintaining HPACK state requires parsing and processing all HEADERS and CONTINUATION frames on a connection. When a request's headers exceed MaxHeaderBytes, no memory is allocated to store the excess headers, but they are still parsed. This permits an attacker to cause an HTTP/2 endpoint to read arbitrary amounts of header data, all associated with a request which is going to be rejected. These headers can include Huffman-encoded data which is significantly more expensive for the receiver to decode than for an attacker to send. The fix sets a limit on the amount of excess header frames we will process before closing a connection. |
| A vulnerability has been found in scipopt scip up to 9.2.1 and classified as problematic. Affected by this vulnerability is the function main of the file examples/LOP/src/genRandomLOPInstance.c of the component File Descriptor Handler. The manipulation of the argument File leads to uncontrolled file descriptor consumption. Local access is required to approach this attack. Upgrading to version 9.2.2 is able to address this issue. The identifier of the patch is d6da63b941216d75fbc1aefea9abf1de6712a2d0. It is recommended to upgrade the affected component. |
| A vulnerability was found in RefindPlusRepo RefindPlus 0.14.2.AB and classified as problematic. Affected by this issue is the function GetDebugLogFile of the file Library/MemLogLib/BootLog.c. The manipulation leads to null pointer dereference. Attacking locally is a requirement. The patch is identified as d2143a1e2deefddd9b105fb7160763c4f8d47ea2. It is recommended to apply a patch to fix this issue. |
| A vulnerability was found in RefindPlusRepo RefindPlus 0.14.2.AB. It has been classified as problematic. This affects the function InternalApfsTranslateBlock of the file Library/RP_ApfsLib/RP_ApfsIo.c. The manipulation leads to null pointer dereference. It is possible to launch the attack on the local host. The patch is named 4d35125ca689a255647e9033dd60c257d26df7cb. It is recommended to apply a patch to fix this issue. |
| A vulnerability in the Internet Key Exchange Version 2 (IKEv2) module of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper parsing of IKEv2 packets. An attacker could exploit this vulnerability by sending a continuous stream of crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to partially exhaust system memory, causing system instability like being unable to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition. |
| nptd-rs is a tool for synchronizing your computer's clock, implementing the NTP and NTS protocols. In versions between 1.2.0 and 1.6.1 inclusive servers which allow non-NTS traffic are affected by a denial of service vulnerability, where an attacker can induce a message storm between two NTP servers running ntpd-rs. Client-only configurations are not affected. Affected users are recommended to upgrade to version 1.6.2 as soon as possible. |
| A vulnerability in the Internet Key Exchange Version 2 (IKEv2) module of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper parsing of IKEv2 packets. An attacker could exploit this vulnerability by sending a continuous stream of crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to partially exhaust system memory, causing system instability like being unable to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition. |
| An attacker can make the Node.js HTTP/2 server completely unavailable by sending a small amount of HTTP/2 frames packets with a few HTTP/2 frames inside. It is possible to leave some data in nghttp2 memory after reset when headers with HTTP/2 CONTINUATION frame are sent to the server and then a TCP connection is abruptly closed by the client triggering the Http2Session destructor while header frames are still being processed (and stored in memory) causing a race condition. |
| An issue in the Configure New Cluster interface of kafka-ui v0.6.0 to v0.7.2 allows attackers to cause a Denial of Service (DoS) via uploading a crafted configuration file. |
| A Denial of Service (DoS) vulnerability exists in the brycedrennan/imaginairy repository, version 15.0.0. The vulnerability is present in the `/api/stablestudio/generate` endpoint, which can be exploited by sending an invalid request. This causes the server process to terminate abruptly, outputting `KILLED` in the terminal, and results in the unavailability of the server. This issue disrupts the server's functionality, affecting all users. |
