| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: act_csum: validate nested VLAN headers
tcf_csum_act() walks nested VLAN headers directly from skb->data when an
skb still carries in-payload VLAN tags. The current code reads
vlan->h_vlan_encapsulated_proto and then pulls VLAN_HLEN bytes without
first ensuring that the full VLAN header is present in the linear area.
If only part of an inner VLAN header is linearized, accessing
h_vlan_encapsulated_proto reads past the linear area, and the following
skb_pull(VLAN_HLEN) may violate skb invariants.
Fix this by requiring pskb_may_pull(skb, VLAN_HLEN) before accessing and
pulling each nested VLAN header. If the header still is not fully
available, drop the packet through the existing error path. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: avoid OGM aggregation when skb tailroom is insufficient
When OGM aggregation state is toggled at runtime, an existing forwarded
packet may have been allocated with only packet_len bytes, while a later
packet can still be selected for aggregation. Appending in this case can
hit skb_put overflow conditions.
Reject aggregation when the target skb tailroom cannot accommodate the new
packet. The caller then falls back to creating a new forward packet
instead of appending. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: br_nd_send: linearize skb before parsing ND options
br_nd_send() parses neighbour discovery options from ns->opt[] and
assumes that these options are in the linear part of request.
Its callers only guarantee that the ICMPv6 header and target address
are available, so the option area can still be non-linear. Parsing
ns->opt[] in that case can access data past the linear buffer.
Linearize request before option parsing and derive ns from the linear
network header. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_multiport: validate range encoding in checkentry
ports_match_v1() treats any non-zero pflags entry as the start of a
port range and unconditionally consumes the next ports[] element as
the range end.
The checkentry path currently validates protocol, flags and count, but
it does not validate the range encoding itself. As a result, malformed
rules can mark the last slot as a range start or place two range starts
back to back, leaving ports_match_v1() to step past the last valid
ports[] element while interpreting the rule.
Reject malformed multiport v1 rules in checkentry by validating that
each range start has a following element and that the following element
is not itself marked as another range start. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: flowlabel: defer exclusive option free until RCU teardown
`ip6fl_seq_show()` walks the global flowlabel hash under the seq-file
RCU read-side lock and prints `fl->opt->opt_nflen` when an option block
is present.
Exclusive flowlabels currently free `fl->opt` as soon as `fl->users`
drops to zero in `fl_release()`. However, the surrounding
`struct ip6_flowlabel` remains visible in the global hash table until
later garbage collection removes it and `fl_free_rcu()` finally tears it
down.
A concurrent `/proc/net/ip6_flowlabel` reader can therefore race that
early `kfree()` and dereference freed option state, triggering a crash
in `ip6fl_seq_show()`.
Fix this by keeping `fl->opt` alive until `fl_free_rcu()`. That matches
the lifetime already required for the enclosing flowlabel while readers
can still reach it under RCU. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: validate MPLS set/set_masked payload length
validate_set() accepted OVS_KEY_ATTR_MPLS as variable-sized payload for
SET/SET_MASKED actions. In action handling, OVS expects fixed-size
MPLS key data (struct ovs_key_mpls).
Use the already normalized key_len (masked case included) and reject
non-matching MPLS action key sizes.
Reject invalid MPLS action payload lengths early. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: defer tunnel netdev_put to RCU release
ovs_netdev_tunnel_destroy() may run after NETDEV_UNREGISTER already
detached the device. Dropping the netdev reference in destroy can race
with concurrent readers that still observe vport->dev.
Do not release vport->dev in ovs_netdev_tunnel_destroy(). Instead, let
vport_netdev_free() drop the reference from the RCU callback, matching
the non-tunnel destroy path and avoiding additional synchronization
under RTNL. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - limit RX SG extraction by receive buffer budget
Make af_alg_get_rsgl() limit each RX scatterlist extraction to the
remaining receive buffer budget.
af_alg_get_rsgl() currently uses af_alg_readable() only as a gate
before extracting data into the RX scatterlist. Limit each extraction
to the remaining af_alg_rcvbuf(sk) budget so that receive-side
accounting matches the amount of data attached to the request.
If skcipher cannot obtain enough RX space for at least one chunk while
more data remains to be processed, reject the recvmsg call instead of
rounding the request length down to zero. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: only handle RESPONSE during service challenge
Only process RESPONSE packets while the service connection is still in
RXRPC_CONN_SERVICE_CHALLENGING. Check that state under state_lock before
running response verification and security initialization, then use a local
secured flag to decide whether to queue the secured-connection work after
the state transition. This keeps duplicate or late RESPONSE packets from
re-running the setup path and removes the unlocked post-transition state
test. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_netem: fix out-of-bounds access in packet corruption
In netem_enqueue(), the packet corruption logic uses
get_random_u32_below(skb_headlen(skb)) to select an index for
modifying skb->data. When an AF_PACKET TX_RING sends fully non-linear
packets over an IPIP tunnel, skb_headlen(skb) evaluates to 0.
Passing 0 to get_random_u32_below() takes the variable-ceil slow path
which returns an unconstrained 32-bit random integer. Using this
unconstrained value as an offset into skb->data results in an
out-of-bounds memory access.
Fix this by verifying skb_headlen(skb) is non-zero before attempting
to corrupt the linear data area. Fully non-linear packets will silently
bypass the corruption logic. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ip6t_rt: reject oversized addrnr in rt_mt6_check()
Reject rt match rules whose addrnr exceeds IP6T_RT_HOPS.
rt_mt6() expects addrnr to stay within the bounds of rtinfo->addrs[].
Validate addrnr during rule installation so malformed rules are rejected
before the match logic can use an out-of-range value. |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: read UNIX_DIAG_VFS data under unix_state_lock
Exact UNIX diag lookups hold a reference to the socket, but not to
u->path. Meanwhile, unix_release_sock() clears u->path under
unix_state_lock() and drops the path reference after unlocking.
Read the inode and device numbers for UNIX_DIAG_VFS while holding
unix_state_lock(), then emit the netlink attribute after dropping the
lock.
This keeps the VFS data stable while the reply is being built. |
| P4 Server versions prior to 2026.1 are configured with insecure default settings that, when exposed to untrusted networks, allow unauthenticated attackers to create arbitrary user accounts, enumerate existing users, authenticate to accounts with no password set, and access depot contents via the built-in 'remote' user. These default settings, taken together, can lead to unauthorized access to source code repositories and other managed assets. The 2026.1 release, expected in May 2026, enforces secure-by-default configurations on upgrade and new installations |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm_user: fix info leak in build_report()
struct xfrm_user_report is a __u8 proto field followed by a struct
xfrm_selector which means there is three "empty" bytes of padding, but
the padding is never zeroed before copying to userspace. Fix that up by
zeroing the structure before setting individual member variables. |
| In the Linux kernel, the following vulnerability has been resolved:
net: rfkill: prevent unlimited numbers of rfkill events from being created
Userspace can create an unlimited number of rfkill events if the system
is so configured, while not consuming them from the rfkill file
descriptor, causing a potential out of memory situation. Prevent this
from bounding the number of pending rfkill events at a "large" number
(i.e. 1000) to prevent abuses like this. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-dw-dma: fix print error log when wait finish transaction
If an error occurs, the device may not have a current message. In this
case, the system will crash.
In this case, it's better to use dev from the struct ctlr (struct spi_controller*). |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Fix missing NULL checks for kstrdup()
1. Replace "of_find_node_by_path("/")" with "of_root" to avoid multiple
calls to "of_node_put()".
2. Fix a potential kernel oops during early boot when memory allocation
fails while parsing CPU model from device tree. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: move async event work off nvmet-wq
For target nvmet_ctrl_free() flushes ctrl->async_event_work.
If nvmet_ctrl_free() runs on nvmet-wq, the flush re-enters workqueue
completion for the same worker:-
A. Async event work queued on nvmet-wq (prior to disconnect):
nvmet_execute_async_event()
queue_work(nvmet_wq, &ctrl->async_event_work)
nvmet_add_async_event()
queue_work(nvmet_wq, &ctrl->async_event_work)
B. Full pre-work chain (RDMA CM path):
nvmet_rdma_cm_handler()
nvmet_rdma_queue_disconnect()
__nvmet_rdma_queue_disconnect()
queue_work(nvmet_wq, &queue->release_work)
process_one_work()
lock((wq_completion)nvmet-wq) <--------- 1st
nvmet_rdma_release_queue_work()
C. Recursive path (same worker):
nvmet_rdma_release_queue_work()
nvmet_rdma_free_queue()
nvmet_sq_destroy()
nvmet_ctrl_put()
nvmet_ctrl_free()
flush_work(&ctrl->async_event_work)
__flush_work()
touch_wq_lockdep_map()
lock((wq_completion)nvmet-wq) <--------- 2nd
Lockdep splat:
============================================
WARNING: possible recursive locking detected
6.19.0-rc3nvme+ #14 Tainted: G N
--------------------------------------------
kworker/u192:42/44933 is trying to acquire lock:
ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90
but task is already holding lock:
ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660
3 locks held by kworker/u192:42/44933:
#0: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660
#1: ffffc9000e6cbe28 ((work_completion)(&queue->release_work)){+.+.}-{0:0}, at: process_one_work+0x1c5/0x660
#2: ffffffff82d4db60 (rcu_read_lock){....}-{1:3}, at: __flush_work+0x62/0x530
Workqueue: nvmet-wq nvmet_rdma_release_queue_work [nvmet_rdma]
Call Trace:
__flush_work+0x268/0x530
nvmet_ctrl_free+0x140/0x310 [nvmet]
nvmet_cq_put+0x74/0x90 [nvmet]
nvmet_rdma_free_queue+0x23/0xe0 [nvmet_rdma]
nvmet_rdma_release_queue_work+0x19/0x50 [nvmet_rdma]
process_one_work+0x206/0x660
worker_thread+0x184/0x320
kthread+0x10c/0x240
ret_from_fork+0x319/0x390
Move async event work to a dedicated nvmet-aen-wq to avoid reentrant
flush on nvmet-wq. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: make use of smbdirect_socket.send_io.bcredits
It turns out that our code will corrupt the stream of
reassabled data transfer messages when we trigger an
immendiate (empty) send.
In order to fix this we'll have a single 'batch' credit per
connection. And code getting that credit is free to use
as much messages until remaining_length reaches 0, then
the batch credit it given back and the next logical send can
happen. |
