| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: xilinx: xdma: Fix regmap max_register
The max_register field is assigned the size of the register memory
region instead of the offset of the last register.
The result is that reading from the regmap via debugfs can cause
a segmentation fault:
tail /sys/kernel/debug/regmap/xdma.1.auto/registers
Unable to handle kernel paging request at virtual address ffff800082f70000
Mem abort info:
ESR = 0x0000000096000007
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x07: level 3 translation fault
[...]
Call trace:
regmap_mmio_read32le+0x10/0x30
_regmap_bus_reg_read+0x74/0xc0
_regmap_read+0x68/0x198
regmap_read+0x54/0x88
regmap_read_debugfs+0x140/0x380
regmap_map_read_file+0x30/0x48
full_proxy_read+0x68/0xc8
vfs_read+0xcc/0x310
ksys_read+0x7c/0x120
__arm64_sys_read+0x24/0x40
invoke_syscall.constprop.0+0x64/0x108
do_el0_svc+0xb0/0xd8
el0_svc+0x38/0x130
el0t_64_sync_handler+0x120/0x138
el0t_64_sync+0x194/0x198
Code: aa1e03e9 d503201f f9400000 8b214000 (b9400000)
---[ end trace 0000000000000000 ]---
note: tail[1217] exited with irqs disabled
note: tail[1217] exited with preempt_count 1
Segmentation fault |
| In the Linux kernel, the following vulnerability has been resolved:
w1: therm: Fix off-by-one buffer overflow in alarms_store
The sysfs buffer passed to alarms_store() is allocated with 'size + 1'
bytes and a NUL terminator is appended. However, the 'size' argument
does not account for this extra byte. The original code then allocated
'size' bytes and used strcpy() to copy 'buf', which always writes one
byte past the allocated buffer since strcpy() copies until the NUL
terminator at index 'size'.
Fix this by parsing the 'buf' parameter directly using simple_strtoll()
without allocating any intermediate memory or string copying. This
removes the overflow while simplifying the code. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: at91-sama5d2_adc: Fix potential use-after-free in sama5d2_adc driver
at91_adc_interrupt can call at91_adc_touch_data_handler function
to start the work by schedule_work(&st->touch_st.workq).
If we remove the module which will call at91_adc_remove to
make cleanup, it will free indio_dev through iio_device_unregister but
quite a bit later. While the work mentioned above will be used. The
sequence of operations that may lead to a UAF bug is as follows:
CPU0 CPU1
| at91_adc_workq_handler
at91_adc_remove |
iio_device_unregister(indio_dev) |
//free indio_dev a bit later |
| iio_push_to_buffers(indio_dev)
| //use indio_dev
Fix it by ensuring that the work is canceled before proceeding with
the cleanup in at91_adc_remove. |
| A maliciously crafted RGB file, when parsed through Autodesk 3ds Max, can force a Memory Corruption vulnerability. A malicious actor can leverage this vulnerability to execute arbitrary code in the context of the current process. |
| A maliciously crafted GIF file, when parsed through Autodesk 3ds Max, can force an Out-of-Bounds Write vulnerability. A malicious actor can leverage this vulnerability to execute arbitrary code in the context of the current process. |
| A maliciously crafted USD file, when loaded or imported into Autodesk Arnold or Autodesk 3ds Max, can force an Out-of-Bounds Write vulnerability. A malicious actor can leverage this vulnerability to execute arbitrary code in the context of the current process. |
| A maliciously crafted GIF file, when parsed through Autodesk 3ds Max, can cause a Stack-Based Buffer Overflow vulnerability. A malicious actor can leverage this vulnerability to execute arbitrary code in the context of the current process. |
| A maliciously crafted RGB file, when parsed through Autodesk 3ds Max, can force a Memory Corruption vulnerability. A malicious actor can leverage this vulnerability to execute arbitrary code in the context of the current process. |
| A maliciously crafted project directory, when opening a max file in Autodesk 3ds Max, could lead to execution of arbitrary code in the context of the current process due to an Untrusted Search Path being utilized. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: st_lsm6dsx: fix iio_chan_spec for sensors without event detection
The st_lsm6dsx_acc_channels array of struct iio_chan_spec has a non-NULL
event_spec field, indicating support for IIO events. However, event
detection is not supported for all sensors, and if userspace tries to
configure accelerometer wakeup events on a sensor device that does not
support them (e.g. LSM6DS0), st_lsm6dsx_write_event() dereferences a NULL
pointer when trying to write to the wakeup register.
Define an additional struct iio_chan_spec array whose members have a NULL
event_spec field, and use this array instead of st_lsm6dsx_acc_channels for
sensors without event detection capability. |
| A vulnerability in the Dynamic Vectoring and Streaming (DVS) Engine implementation of Cisco AsyncOS Software for Cisco Secure Web Appliance could allow an unauthenticated, remote attacker to bypass the anti-malware scanner, allowing malicious archive files to be downloaded.
This vulnerability is due to improper handling of certain archive files. An attacker could exploit this vulnerability by sending a crafted archive file, which should be blocked, through an affected device. A successful exploit could allow the attacker to bypass the anti-malware scanner and download malware onto an end user workstation. The downloaded malware will not automatically execute unless the end user extracts and launches the malicious file. |
| A vulnerability in the Certificate Management feature of Cisco Meeting Management could allow an authenticated, remote attacker to upload arbitrary files, execute arbitrary commands, and elevate privileges to root on an affected system.
This vulnerability is due to improper input validation in certain sections of the web-based management interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected system. A successful exploit could allow the attacker to upload arbitrary files to the affected system. The malicious files could overwrite system files that are processed by the root system account and allow arbitrary command execution with root privileges. To exploit this vulnerability, the attacker must have valid credentials for a user account with at least the role of video operator. |
| n8n is an open source workflow automation platform. From version 1.65.0 to before 1.114.3, the use of Buffer.allocUnsafe() and Buffer.allocUnsafeSlow() in the task runner allowed untrusted code to allocate uninitialized memory. Such uninitialized buffers could contain residual data from within the same Node.js process (for example, data from prior requests, tasks, secrets, or tokens), resulting in potential information disclosure. This issue has been patched in version 1.114.3. |
| Improper handling of insufficient permission or privileges in ClipboardService prior to SMR Apr-2025 Release 1 allows local attackers to access image files across multiple users. User interaction is required for triggering this vulnerability. |
| Improper Validation of Specified Quantity in Input vulnerability in Mitsubishi Electric MELSEC iQ-R Series R08PCPU, R16PCPU, R32PCPU, and R120PCPU allows an unauthenticated attacker to read device data or part of a control program from the affected product, write device data in the affected product, or cause a denial of service (DoS) condition on the affected product by sending a specially crafted packet containing a specific command to the affected product. |
| IBM Jazz Reporting Service could allow an authenticated user on the host network to cause a denial of service using specially crafted SQL query that consumes excess memory resources. |
| The ShortPixel Image Optimizer plugin for WordPress is vulnerable to Arbitrary File Read via path traversal in the 'loadFile' parameter in all versions up to, and including, 6.4.2 due to insufficient path validation and sanitization in the 'loadLogFile' AJAX action. This makes it possible for authenticated attackers, with Editor-level access and above, to read the contents of arbitrary files on the server, which can contain sensitive information such as database credentials and authentication keys. |
| The ProfileGrid – User Profiles, Groups and Communities plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 5.9.7.2 via the 'pm_upload_image' and 'pm_upload_cover_image' AJAX actions. This is due to the update_user_meta() function being called outside of the user authorization check in public/partials/crop.php and public/partials/coverimg_crop.php. This makes it possible for authenticated attackers, with Subscriber-level access and above, to change any user's profile picture or cover image, including administrators. |
| The All In One Image Viewer Block plugin for WordPress is vulnerable to Server-Side Request Forgery in all versions up to, and including, 1.0.2 due to missing authorization and URL validation on the image-proxy REST API endpoint. This makes it possible for unauthenticated attackers to make web requests to arbitrary locations originating from the web application and can be used to query and modify information from internal services. |
| Path Traversal vulnerability in Digitek ADT1100 and Digitek DT950 from PRIMION DIGITEK, S.L.U (Azkoyen Group). This vulnerability allows an attacker to access arbitrary files in the server's file system, thet is, 'http://<host>/..%2F..% 2F..%2F..%2F..%2F..%2F..%2F..%2F..%2Fetc%2Fpasswd'. By manipulating the input to include URL encoded directory traversal sequences (e.g., %2F representing /), an attacker can bypass the input validation mechanisms ans retrieve sensitive files outside the intended directory, which could lead to information disclosure or further system compromise. |
