| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
x86/fpu: Clear XSTATE_BV[i] in guest XSAVE state whenever XFD[i]=1
When loading guest XSAVE state via KVM_SET_XSAVE, and when updating XFD in
response to a guest WRMSR, clear XFD-disabled features in the saved (or to
be restored) XSTATE_BV to ensure KVM doesn't attempt to load state for
features that are disabled via the guest's XFD. Because the kernel
executes XRSTOR with the guest's XFD, saving XSTATE_BV[i]=1 with XFD[i]=1
will cause XRSTOR to #NM and panic the kernel.
E.g. if fpu_update_guest_xfd() sets XFD without clearing XSTATE_BV:
------------[ cut here ]------------
WARNING: arch/x86/kernel/traps.c:1524 at exc_device_not_available+0x101/0x110, CPU#29: amx_test/848
Modules linked in: kvm_intel kvm irqbypass
CPU: 29 UID: 1000 PID: 848 Comm: amx_test Not tainted 6.19.0-rc2-ffa07f7fd437-x86_amx_nm_xfd_non_init-vm #171 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:exc_device_not_available+0x101/0x110
Call Trace:
<TASK>
asm_exc_device_not_available+0x1a/0x20
RIP: 0010:restore_fpregs_from_fpstate+0x36/0x90
switch_fpu_return+0x4a/0xb0
kvm_arch_vcpu_ioctl_run+0x1245/0x1e40 [kvm]
kvm_vcpu_ioctl+0x2c3/0x8f0 [kvm]
__x64_sys_ioctl+0x8f/0xd0
do_syscall_64+0x62/0x940
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
This can happen if the guest executes WRMSR(MSR_IA32_XFD) to set XFD[18] = 1,
and a host IRQ triggers kernel_fpu_begin() prior to the vmexit handler's
call to fpu_update_guest_xfd().
and if userspace stuffs XSTATE_BV[i]=1 via KVM_SET_XSAVE:
------------[ cut here ]------------
WARNING: arch/x86/kernel/traps.c:1524 at exc_device_not_available+0x101/0x110, CPU#14: amx_test/867
Modules linked in: kvm_intel kvm irqbypass
CPU: 14 UID: 1000 PID: 867 Comm: amx_test Not tainted 6.19.0-rc2-2dace9faccd6-x86_amx_nm_xfd_non_init-vm #168 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:exc_device_not_available+0x101/0x110
Call Trace:
<TASK>
asm_exc_device_not_available+0x1a/0x20
RIP: 0010:restore_fpregs_from_fpstate+0x36/0x90
fpu_swap_kvm_fpstate+0x6b/0x120
kvm_load_guest_fpu+0x30/0x80 [kvm]
kvm_arch_vcpu_ioctl_run+0x85/0x1e40 [kvm]
kvm_vcpu_ioctl+0x2c3/0x8f0 [kvm]
__x64_sys_ioctl+0x8f/0xd0
do_syscall_64+0x62/0x940
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
The new behavior is consistent with the AMX architecture. Per Intel's SDM,
XSAVE saves XSTATE_BV as '0' for components that are disabled via XFD
(and non-compacted XSAVE saves the initial configuration of the state
component):
If XSAVE, XSAVEC, XSAVEOPT, or XSAVES is saving the state component i,
the instruction does not generate #NM when XCR0[i] = IA32_XFD[i] = 1;
instead, it operates as if XINUSE[i] = 0 (and the state component was
in its initial state): it saves bit i of XSTATE_BV field of the XSAVE
header as 0; in addition, XSAVE saves the initial configuration of the
state component (the other instructions do not save state component i).
Alternatively, KVM could always do XRSTOR with XFD=0, e.g. by using
a constant XFD based on the set of enabled features when XSAVEing for
a struct fpu_guest. However, having XSTATE_BV[i]=1 for XFD-disabled
features can only happen in the above interrupt case, or in similar
scenarios involving preemption on preemptible kernels, because
fpu_swap_kvm_fpstate()'s call to save_fpregs_to_fpstate() saves the
outgoing FPU state with the current XFD; and that is (on all but the
first WRMSR to XFD) the guest XFD.
Therefore, XFD can only go out of sync with XSTATE_BV in the above
interrupt case, or in similar scenarios involving preemption on
preemptible kernels, and it we can consider it (de facto) part of KVM
ABI that KVM_GET_XSAVE returns XSTATE_BV[i]=0 for XFD-disabled features.
[Move clea
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: tlv320adcx140: fix null pointer
The "snd_soc_component" in "adcx140_priv" was only used once but never
set. It was only used for reaching "dev" which is already present in
"adcx140_priv". |
| In the Linux kernel, the following vulnerability has been resolved:
block: zero non-PI portion of auto integrity buffer
The auto-generated integrity buffer for writes needs to be fully
initialized before being passed to the underlying block device,
otherwise the uninitialized memory can be read back by userspace or
anyone with physical access to the storage device. If protection
information is generated, that portion of the integrity buffer is
already initialized. The integrity data is also zeroed if PI generation
is disabled via sysfs or the PI tuple size is 0. However, this misses
the case where PI is generated and the PI tuple size is nonzero, but the
metadata size is larger than the PI tuple. In this case, the remainder
("opaque") of the metadata is left uninitialized.
Generalize the BLK_INTEGRITY_CSUM_NONE check to cover any case when the
metadata is larger than just the PI tuple. |
| The User Registration & Membership plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the Content Access Rules REST API endpoints in versions 5.0.1 through 5.1.4. This is due to the `check_permissions()` method only checking for `edit_posts` capability instead of an administrator-level capability. This makes it possible for authenticated attackers, with Contributor-level access and above, to list, create, modify, toggle, duplicate, and delete site-wide content restriction rules, potentially exposing restricted content or denying legitimate user access. |
| Active Support is a toolkit of support libraries and Ruby core extensions extracted from the Rails framework. Prior to versions 8.1.2.1, 8.0.4.1, and 7.2.3.1, `SafeBuffer#%` does not propagate the `@html_unsafe` flag to the newly created buffer. If a `SafeBuffer` is mutated in place (e.g. via `gsub!`) and then formatted with `%` using untrusted arguments, the result incorrectly reports `html_safe? == true`, bypassing ERB auto-escaping and possibly leading to XSS. Versions 8.1.2.1, 8.0.4.1, and 7.2.3.1 contain a patch. |
| The LearnPress – WordPress LMS Plugin plugin for WordPress is vulnerable to unauthorized deletion of quiz question answers due to a missing capability check in the delete_question_answer() function of the EditQuestionAjax class in all versions up to, and including, 4.3.2.8. The AbstractAjax::catch_lp_ajax() dispatcher verifies a wp_rest nonce but performs no current_user_can() check, and the QuestionAnswerModel::delete() method only validates minimum answer counts without checking user capabilities. This makes it possible for authenticated attackers, with Subscriber-level access and above, to delete answer options from any quiz question on the site. |
| Connect-CMS is a content management system. In versions on the 1.x series up to and including 1.41.0 and versions on the 2.x series up to and including 2.41.0, an improper authorization issue in the My Page profile update feature may allow modification of arbitrary user information. Versions 1.41.1 and 2.41.1 contain a patch. |
| Information disclosure in the Widget: Cocoa component. This vulnerability affects Firefox < 149, Firefox ESR < 140.9, Thunderbird < 149, and Thunderbird < 140.9. |
| Denial-of-service in the WebRTC: Signaling component. This vulnerability affects Firefox < 149, Firefox ESR < 140.9, Thunderbird < 149, and Thunderbird < 140.9. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.27, 2.13.3, and 2.14.1, a flaw in the LDAP node's filter escape logic allowed LDAP metacharacters to pass through unescaped when user-controlled input was interpolated into LDAP search filters. In workflows where external user input is passed via expressions into the LDAP node's search parameters, an attacker could manipulate the constructed filter to retrieve unintended LDAP records or bypass authentication checks implemented in the workflow. Exploitation requires a specific workflow configuration. The LDAP node must be used with user-controlled input passed via expressions (e.g., from a form or webhook). The issue has been fixed in n8n versions 1.123.27, 2.13.3, and 2.14.1. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations: Limit workflow creation and editing permissions to fully trusted users only, disable the LDAP node by adding `n8n-nodes-base.ldap` to the `NODES_EXCLUDE` environment variable, and/or avoid passing unvalidated external user input into LDAP node search parameters via expressions. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Prior to versions 2.6.4 and 1.123.23, an authenticated user without permission to list external secrets could reference a secret by the external name in a credential and retrieve its plaintext value when saving the credential. This bypassed the `externalSecret:list` permission check and allowed access to secrets stored in connected vaults without admin or owner privileges. This issue requires the instance to have an external secrets vault configured. The attacker must know or be able to guess the name of a target secret. The issue has been fixed in n8n versions 1.123.23 and 2.6.4. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations: Restrict n8n access to fully trusted users only, and/or disable external secrets integration until the patch can be applied. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in Xcode 26.4. An app may be able to cause unexpected system termination. |
| Modoboa is a mail hosting and management platform. Prior to version 2.7.1, `exec_cmd()` in `modoboa/lib/sysutils.py` always runs subprocess calls with `shell=True`. Since domain names flow directly into shell command strings without any sanitization, a Reseller or SuperAdmin can include shell metacharacters in a domain name to run arbitrary OS commands on the server. Version 2.7.1 patches the issue. |
| A flaw was found in the udisks storage management daemon that allows unprivileged users to back up LUKS encryption headers without authorization. The issue occurs because a privileged D-Bus method responsible for exporting encryption metadata does not perform a policy check. As a result, sensitive cryptographic metadata can be read and written to attacker-controlled locations. This weakens the confidentiality guarantees of encrypted storage volumes. |
| A flaw was found in the udisks storage management daemon that exposes a privileged D-Bus API for restoring LUKS encryption headers without proper authorization checks. The issue allows a local unprivileged user to instruct the root-owned udisks daemon to overwrite encryption metadata on block devices. This can permanently invalidate encryption keys and render encrypted volumes inaccessible. Successful exploitation results in a denial-of-service condition through irreversible data loss. |
| pf4j before 20c2f80 has a path traversal vulnerability in the extract() function of Unzip.java, where improper handling of zip entry names can allow directory traversal or Zip Slip attacks, due to a lack of proper path normalization and validation. |
| An issue in ralphje Signify before v.0.9.2 allows a remote attacker to escalate privileges via the signed_data.py and the context.py components |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: always detect conflicting inodes when logging inode refs
After rename exchanging (either with the rename exchange operation or
regular renames in multiple non-atomic steps) two inodes and at least
one of them is a directory, we can end up with a log tree that contains
only of the inodes and after a power failure that can result in an attempt
to delete the other inode when it should not because it was not deleted
before the power failure. In some case that delete attempt fails when
the target inode is a directory that contains a subvolume inside it, since
the log replay code is not prepared to deal with directory entries that
point to root items (only inode items).
1) We have directories "dir1" (inode A) and "dir2" (inode B) under the
same parent directory;
2) We have a file (inode C) under directory "dir1" (inode A);
3) We have a subvolume inside directory "dir2" (inode B);
4) All these inodes were persisted in a past transaction and we are
currently at transaction N;
5) We rename the file (inode C), so at btrfs_log_new_name() we update
inode C's last_unlink_trans to N;
6) We get a rename exchange for "dir1" (inode A) and "dir2" (inode B),
so after the exchange "dir1" is inode B and "dir2" is inode A.
During the rename exchange we call btrfs_log_new_name() for inodes
A and B, but because they are directories, we don't update their
last_unlink_trans to N;
7) An fsync against the file (inode C) is done, and because its inode
has a last_unlink_trans with a value of N we log its parent directory
(inode A) (through btrfs_log_all_parents(), called from
btrfs_log_inode_parent()).
8) So we end up with inode B not logged, which now has the old name
of inode A. At copy_inode_items_to_log(), when logging inode A, we
did not check if we had any conflicting inode to log because inode
A has a generation lower than the current transaction (created in
a past transaction);
9) After a power failure, when replaying the log tree, since we find that
inode A has a new name that conflicts with the name of inode B in the
fs tree, we attempt to delete inode B... this is wrong since that
directory was never deleted before the power failure, and because there
is a subvolume inside that directory, attempting to delete it will fail
since replay_dir_deletes() and btrfs_unlink_inode() are not prepared
to deal with dir items that point to roots instead of inodes.
When that happens the mount fails and we get a stack trace like the
following:
[87.2314] BTRFS info (device dm-0): start tree-log replay
[87.2318] BTRFS critical (device dm-0): failed to delete reference to subvol, root 5 inode 256 parent 259
[87.2332] ------------[ cut here ]------------
[87.2338] BTRFS: Transaction aborted (error -2)
[87.2346] WARNING: CPU: 1 PID: 638968 at fs/btrfs/inode.c:4345 __btrfs_unlink_inode+0x416/0x440 [btrfs]
[87.2368] Modules linked in: btrfs loop dm_thin_pool (...)
[87.2470] CPU: 1 UID: 0 PID: 638968 Comm: mount Tainted: G W 6.18.0-rc7-btrfs-next-218+ #2 PREEMPT(full)
[87.2489] Tainted: [W]=WARN
[87.2494] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[87.2514] RIP: 0010:__btrfs_unlink_inode+0x416/0x440 [btrfs]
[87.2538] Code: c0 89 04 24 (...)
[87.2568] RSP: 0018:ffffc0e741f4b9b8 EFLAGS: 00010286
[87.2574] RAX: 0000000000000000 RBX: ffff9d3ec8a6cf60 RCX: 0000000000000000
[87.2582] RDX: 0000000000000002 RSI: ffffffff84ab45a1 RDI: 00000000ffffffff
[87.2591] RBP: ffff9d3ec8a6ef20 R08: 0000000000000000 R09: ffffc0e741f4b840
[87.2599] R10: ffff9d45dc1fffa8 R11: 0000000000000003 R12: ffff9d3ee26d77e0
[87.2608] R13: ffffc0e741f4ba98 R14: ffff9d4458040800 R15: ffff9d44b6b7ca10
[87.2618] FS: 00007f7b9603a840(0000) GS:ffff9d4658982000(0000) knlGS:0000000000000000
[87.
---truncated--- |
| OpenClaw versions prior to 2026.3.7 contain a sandbox escape vulnerability in the /acp spawn command that allows authorized sandboxed sessions to initialize host-side ACP runtime. Attackers can bypass sandbox restrictions by invoking the /acp spawn slash-command to cross from sandboxed chat context into host-side ACP session initialization when ACP is enabled. |
| A flaw has been found in TOTOLINK X6000R 9.4.0cu.1360_B20241207/9.4.0cu.1498_B20250826. Affected by this issue is the function setLanCfg of the file /usr/sbin/shttpd. Executing a manipulation of the argument Hostname can lead to os command injection. The attack may be launched remotely. |
