| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper neutralization of the title date in the 'VDatePicker' component in Vuetify, allows unsanitized HTML to be inserted into the page. This can lead to a Cross-Site Scripting (XSS) https://owasp.org/www-community/attacks/xss attack. The vulnerability occurs because the 'title-date-format' property of the 'VDatePicker' can accept a user created function and assign its output to the 'innerHTML' property of the title element without sanitization.
This issue affects Vuetify versions greater than or equal to 2.0.0 and less than 3.0.0.
Note:
Version 2.x of Vuetify is End-of-Life and will not receive any updates to address this issue. For more information see here https://v2.vuetifyjs.com/en/about/eol/ . |
| Improper access control for some Device Plugins for Kubernetes software maintained by Intel before version 0.32.0 may allow a privileged user to potentially enable denial of service via local access. |
| An issue was discovered in the COROS application through 3.8.12 for Android. Bluetooth pairing and bonding is neither initiated nor enforced by the application itself. Also, the watch does not enforce pairing and bonding. As a result, any data transmitted via BLE remains unencrypted, allowing attackers within Bluetooth range to eavesdrop on the communication. Furthermore, even if a user manually initiates pairing and bonding in the Android settings, the application continues to transmit data without requiring the watch to be bonded. This fallback behavior enables attackers to exploit the communication, for example, by conducting an active machine-in-the-middle attack. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: ensure no dirty metadata is written back for an fs with errors
[BUG]
During development of a minor feature (make sure all btrfs_bio::end_io()
is called in task context), I noticed a crash in generic/388, where
metadata writes triggered new works after btrfs_stop_all_workers().
It turns out that it can even happen without any code modification, just
using RAID5 for metadata and the same workload from generic/388 is going
to trigger the use-after-free.
[CAUSE]
If btrfs hits an error, the fs is marked as error, no new
transaction is allowed thus metadata is in a frozen state.
But there are some metadata modifications before that error, and they are
still in the btree inode page cache.
Since there will be no real transaction commit, all those dirty folios
are just kept as is in the page cache, and they can not be invalidated
by invalidate_inode_pages2() call inside close_ctree(), because they are
dirty.
And finally after btrfs_stop_all_workers(), we call iput() on btree
inode, which triggers writeback of those dirty metadata.
And if the fs is using RAID56 metadata, this will trigger RMW and queue
new works into rmw_workers, which is already stopped, causing warning
from queue_work() and use-after-free.
[FIX]
Add a special handling for write_one_eb(), that if the fs is already in
an error state, immediately mark the bbio as failure, instead of really
submitting them.
Then during close_ctree(), iput() will just discard all those dirty
tree blocks without really writing them back, thus no more new jobs for
already stopped-and-freed workqueues.
The extra discard in write_one_eb() also acts as an extra safenet.
E.g. the transaction abort is triggered by some extent/free space
tree corruptions, and since extent/free space tree is already corrupted
some tree blocks may be allocated where they shouldn't be (overwriting
existing tree blocks). In that case writing them back will further
corrupting the fs. |
| The Media.net Ads Manager plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation and missing capability check in the 'sendMail' function in all versions up to, and including, 2.10.13. This makes it possible for authenticated attackers, with subscriber-level and above permissions, to upload arbitrary files on the affected site's server which may make remote code execution possible. The vulnerability is only exploitable if anyone has ever logged in through the API. |
| The Simple Registration for WooCommerce plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 1.5.8. This is due to missing nonce validation on the role requests admin page handler in the includes/display-role-admin.php file. This makes it possible for unauthenticated attackers to approve pending role requests and escalate user privileges via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| Cookie policy is observable via built-in browser tools. In the presence of XSS, this could lead to full session compromise. |
| In KDE Connect before 1.33.0 on Android, a packet can be crafted that causes two paired devices to unpair. Specifically, it is an invalid discovery packet sent over broadcast UDP. |
| Incorrect Usage of Seeds in Pseudo-Random Number Generator (CWE- 335) vulnerability in the High Sec ELM may allow a sophisticated attacker with physical access, to compromise internal device communications.
This issue affects Command Centre Server:
9.30 prior to vCR9.30.251028a (distributed in 9.30.2881 (MR3)), 9.20 prior to vCR9.20.251028a (distributed in 9.20.3265 (MR5)), 9.10 prior to vCR9.10.251028a (distributed in 9.10.4135 (MR8)), all versions of 9.00 and prior. |
| Improper access control in some firmware package and LED mode toggle tool for some Intel(R) PCIe Switch software before version MR4_1.0b1 may allow a privileged user to potentially enable escalation of privilege via local access. |
| In KDE Connect before 1.33.0 on Android, malicious device IDs (sent via broadcast UDP) could cause an application crash. |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: validate cluster allocation bits of the allocation bitmap
syzbot created an exfat image with cluster bits not set for the allocation
bitmap. exfat-fs reads and uses the allocation bitmap without checking
this. The problem is that if the start cluster of the allocation bitmap
is 6, cluster 6 can be allocated when creating a directory with mkdir.
exfat zeros out this cluster in exfat_mkdir, which can delete existing
entries. This can reallocate the allocated entries. In addition,
the allocation bitmap is also zeroed out, so cluster 6 can be reallocated.
This patch adds exfat_test_bitmap_range to validate that clusters used for
the allocation bitmap are correctly marked as in-use. |
| The Conference Scheduler plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the ‘className’ parameter in all versions up to, and including, 2.5.1 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| A flaw was found in BusyBox. This vulnerability allows an attacker to modify files outside of the intended extraction directory by crafting a malicious tar archive containing unvalidated hardlink or symlink entries. If the tar archive is extracted with elevated privileges, this flaw can lead to privilege escalation, enabling an attacker to gain unauthorized access to critical system files. |
| Integer overflow or wraparound in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| A flaw was found in libsoup. The implementation of HTTP range requests is vulnerable to a resource consumption attack. This flaw allows a malicious client to request the same range many times in a single HTTP request, causing the server to use large amounts of memory. This does not allow for a full denial of service. |
| Sending a crafted SOAP "set" operation message within the Mobile Network Operator (MNO) internal Radio Access Network (RAN) management network can cause Nokia Single RAN baseband OAM service component restart with software versions earlier than release 24R1-SR 1.0 MP. This issue has been corrected to release 24R1-SR 1.0 MP and later.
The OAM service component restarts automatically after the stack overflow without causing a base station restart or network service degradation, and without leaving any permanent impact on the Nokia Single RAN baseband OAM service. |
| A use-after-free type vulnerability was found in libsoup, in the soup_message_headers_get_content_disposition() function. This flaw allows a malicious HTTP client to cause memory corruption in the libsoup server. |
| Sending a crafted SOAP "provision" operation message archive field within the Mobile Network Operator (MNO) internal Radio Access Network (RAN) management network can cause path traversal issue in Nokia Single RAN baseband software with versions earlier than release 24R1-SR 1.0 MP. This issue has been corrected to release 24R1-SR 1.0 MP and later.
Beginning with release 24R1-SR 1.0 MP, the OAM service software utilizes libarchive APIs with security options enabled, effectively mitigating the reported path traversal issue. |
| Sending a crafted SOAP "provision" operation message PlanId field within the Mobile Network Operator (MNO) internal Radio Access Network (RAN) management network can cause path traversal issue in Nokia Single RAN baseband software with versions earlier than release 24R1-SR 1.0 MP. This issue has been corrected to release 24R1-SR 1.0 MP and later.
Beginning with release 24R1-SR 1.0 MP, the OAM service software performed PlanId field input validations mitigate the reported path traversal issue. |
