Export limit exceeded: 399868 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (399868 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97536 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix use-after-free of qpair work on queue teardown The response queue MSI-X handler qla2xxx_msix_rsp_q() schedules qla_do_work() via queue_work(ha->wq, &qpair->q_work). qla_do_work() dereferences the qpair (vha, rsp) and takes qpair->qp_lock. During teardown, qla2xxx_delete_qpair() deletes the response queue, which calls free_irq() in qla25xx_free_rsp_que(), and then frees the queue and the qpair. free_irq() waits for running hardirq handlers but does not cancel work already placed on ha->wq. A still-pending q_work then runs qla_do_work() against the freed qpair and response queue, causing a use-after-free. This is especially likely during full adapter teardown, where destroy_workqueue(ha->wq) forces pending work to run after the queue pairs have been freed. Flush the work item with cancel_work_sync() in qla25xx_free_rsp_que() after free_irq() has released the interrupt (so no new work can be queued) and before the response queue and qpair memory are freed (so the flushed handler still sees valid memory). Guard on rsp->qpair and ha->wq to match the INIT_WORK() condition and avoid operating on an uninitialized work_struct. | ||||
| CVE-2026-97543 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: destroy seen inode bitmap when we fail to add a dirpath LOLLM observes a memory leak in xchk_dirtree_create_path if we create the directory path object but appending the name to the path fails. When this happens, we don't tear down the (empty) seen inode bitmap. This is a pretty trivial error, but let's not leave logic bombs. Do the same for a similar bug in xrep_dirtree_create_adoption_path. | ||||
| CVE-2026-97970 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: watchdog: msc313e: Avoid division by zero clk_get_rate() could return 0. Avoid a division by zero panic. | ||||
| CVE-2026-97972 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: macb: put the "mdio" child node reference on success macb_mii_init() holds the reference returned by of_get_child_by_name() for macb_mdiobus_register() and drops it only on the error paths, so every successful probe leaks a node reference. On a CM5, overlay removal after four bind cycles reports OF: ERROR: memory leak, expected refcount 1 instead of 5 Drop the reference after registration, where __mdiobus_register() has already taken its own for the lifetime of the bus. | ||||
| CVE-2026-97976 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: validate packet_len before skb_put_data btintel_pcie_submit_rx_work() reads packet_len from rfh_hdr without checking if it exceeds the RX buffer size. An oversized packet_len can lead to an out-of-bounds read in skb_put_data(). Validate packet_len to ensure it is non-zero and does not exceed BTINTEL_PCIE_BUFFER_SIZE - sizeof(*rfh_hdr), logging an error when invalid. This issue was reported by Claude Mythos. It can be simulated either by using customized firmware configured to return an invalid packet_len or by modifying rfh_hdr->packet_len in the driver before calling btintel_pcie_submit_rx_work(). | ||||
| CVE-2026-97977 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: Fix UAF of btusb_data by rx_work btusb_close() and btusb_flush() cancel data->rx_work with the asynchronous cancel_delayed_work(), so if btusb_rx_work() is already running on another CPU it keeps running after the cancel returns. btusb_disconnect() calls hci_unregister_dev(), which invokes btusb_close(), and then frees the btusb_data. A still running btusb_rx_work() then dereferences the freed data: while ((skb = skb_dequeue(&data->acl_q))) data->recv_acl(data->hdev, skb); Use cancel_delayed_work_sync() instead. In btusb_close() the cancel also has to happen after btusb_stop_traffic(), otherwise an URB completion racing with the cancel can requeue the work right after it has been waited for. | ||||
| CVE-2026-97980 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/debug: Fix NULL pointer dereference in debug_set_level() Commit a2cec6863709 ("s390/debug: Add s390dbf kernel parameter") incorrectly removed a null-id check from debug_set_level(), introducing a possible NULL pointer dereference for debug-API users that put debug_register() results unchecked into debug_set_level(). Fix this by moving the check from the internal _debug_set_level() variant back to the external debug_set_level() wrapper. | ||||
| CVE-2026-97981 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: cortina: Count dropped frames as NAPI work The RX loop only consumes budget when it successfully delivers a frame. Error paths keep consuming descriptors without reducing the budget, so a stream of bad frames can process the entire receive ring in one poll. Move the budget accounting to a common end-of-frame path. This counts each completed frame as NAPI work whether it was delivered or dropped, matching the behavior of the vendor driver. | ||||
| CVE-2026-97983 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vduse: return compat ioctl results directly The compat handler handles VDUSE_IOTLB_GET_FD and VDUSE_VQ_GET_INFO, but then calls the native handler. Their different command sizes make native dispatch return -ENOIOCTLCMD. For GET_FD, this overwrites receive_fd()'s return value after the descriptor is installed, leaking one fd per call. Return handled compat results directly and use native dispatch only for other commands. | ||||
| CVE-2026-97984 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ipv6: Fix UDP length overflow with PMTU discover and big MTU This commit bounds cork->base.fragsize to IP6_MAX_MTU for UDP sockets to avoid a possible overflow of UDP length that triggers a WARN in udp_set_len_short when setsockopt IPV6_MTU_DISCOVER is set to IPV6_PMTUDISC_DO or IPV6_PMTUDISC_PROBE, and a large packet is sent over a netdev with an unusually large MTU. Steps to reproduce (included in the new selftest): 1. Set device MTU bigger than IP6_MAX_MTU. cork->base.fragsize will be set to that MTU in ip6_setup_cork. 2. Set IPV6_MTU_DISCOVER to IPV6_PMTUDISC_PROBE or IPV6_PMTUDISC_DO. It lets maxnonfragsize be set to device MTU (cork->fragsize) in __ip6_append_data, rather than to IP6_MAX_MTU. 3. Send 65528 bytes of payload (+8 bytes of UDP header, +40 bytes of IPv6 header). Device MTU allows it (it's only one byte bigger than IP6_MAX_MTU, and the device MTU is bigger than that). 4. The UDP length in the built packet is 65536, which overflows the 16-bit length field and triggers the WARN in udp_set_len_short. To avoid breaking sending UDP jumbograms over raw IPv6 sockets, limit the change to UDP sockets only. The original overflow bug with IPv6 and IPV6_PMTUDISC_DO seems to predate git history (verified reproduction on 2.6.21), was fixed later, and then reappeared in commit 427faee167bc ("net: ipv6: introduce ip6_dst_mtu_maybe_forward"), which is chosen as the Fixes tag here. The overflow with IPV6_PMTUDISC_PROBE reproduces since its introduction in commit 628a5c561890 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE"). | ||||
| CVE-2026-97550 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix unit conversions in per_binval computation LOLLM noticed that we're doing the unit conversion in the per_binval computation backwards -- xfs_buf_inval_log_space's second parameter is supposed to be in bytes, but max_binval is in units of fsblocks. Hence the conversion should be FSB -> B, not the other way around. | ||||
| CVE-2026-97557 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: avoid leaking refcount in cifs_queue_oplock_break() cifs_queue_oplock_break() unconditionally takes a reference on the target file before queueing cifs_oplock_break(). Only that work item decreases the reference counter again. If another oplock break arrives while that work is still queued, queue_work() will return false and not queue this second work item. As a result, we will never reach the point to drop the file reference again and are leaking this reference. This can be triggered when interacting with a slow-responding server. As a result, later unmount operations for this file system will fail with BUG: Dentry ... still in use (1) [unmount of cifs cifs] VFS: Busy inodes after unmount of cifs (cifs) kernel BUG at fs/super.c:777! Fix this by only incrementing the reference count if the work has been queued successfully. Taking it after queue_work() is safe because all three callers hold tcon->open_file_lock across the call and _cifsFileInfo_put() decrements under that same lock, so a worker that starts the handler in the window cannot drop the reference before it has been taken. | ||||
| CVE-2026-97602 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: inet: frags: invalidate queues before flushing them fqdir_pre_exit() flushes the skbs from incomplete queues without changing their completion state. A fragment which found a queue before high_thresh was cleared can then acquire the queue lock and reuse stale reassembly metadata. A queue concurrently killed after fqdir->dead is set can instead become INET_FRAG_COMPLETE|INET_FRAG_HASH_DEAD while still holding its old skbs; skipping it because it is complete leaves those references behind until asynchronous fqdir teardown. For IPv6, stale metadata can make ip6_frag_reasm() use the old nhoffset with a new skb and access memory out of bounds. The resulting heap corruption can be leveraged for local privilege escalation when unprivileged network namespaces are available. Unflushed fragments can also keep conntrack references alive after the conntrack per-net cleanup point. Kill each incomplete queue, then flush every queue still owned by the dying rhashtable. HASH_DEAD identifies that ownership, while complete queues without it are already owned by another destroy path and must be left alone. Releasing a timer reference removed by inet_frag_kill() is deferred to inet_frag_putn(), after the queue lock is dropped. KASAN report: BUG: KASAN: slab-out-of-bounds in ipv6_frag_rcv (net/ipv6/reassembly.c:289 (discriminator 2) net/ipv6/reassembly.c:229 (discriminator 2) net/ipv6/reassembly.c:391 (discriminator 2)) Write of size 1 at addr ff110001039c6e00 by task poc/771 Call Trace: ? ipv6_frag_rcv (net/ipv6/reassembly.c:289 (discriminator 2) net/ipv6/reassembly.c:229 (discriminator 2) net/ipv6/reassembly.c:391 (discriminator 2)) ipv6_frag_rcv (net/ipv6/reassembly.c:289 (discriminator 2) net/ipv6/reassembly.c:229 (discriminator 2) net/ipv6/reassembly.c:391 (discriminator 2)) ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:479 (discriminator 5)) ip6_input_finish (net/ipv6/ip6_input.c:534) ipv6_rcv (include/net/dst.h:480 (discriminator 3) net/ipv6/ip6_input.c:119 (discriminator 3) net/ipv6/ip6_input.c:109 (discriminator 3) include/linux/netfilter.h:325 (discriminator 3) include/linux/netfilter.h:319 (discriminator 3) net/ipv6/ip6_input.c:351 (discriminator 3)) packet_sendmsg (net/packet/af_packet.c:3110 net/packet/af_packet.c:3142) __x64_sys_sendmmsg (net/socket.c:2883 net/socket.c:2880 net/socket.c:2880) The buggy address belongs to the object at ff110001039c6b40 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 0 bytes to the right of allocated 704-byte region [ff110001039c6b40, ff110001039c6e00) BUG: KASAN: slab-out-of-bounds in ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:423 (discriminator 1)) Read of size 1 at addr ff110001039c6e08 by task poc/771 Call Trace: ? ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:423 (discriminator 1)) ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:423 (discriminator 1)) ip6_input_finish (net/ipv6/ip6_input.c:534) ipv6_rcv (include/net/dst.h:480 (discriminator 3) net/ipv6/ip6_input.c:119 (discriminator 3) net/ipv6/ip6_input.c:109 (discriminator 3) include/linux/netfilter.h:325 (discriminator 3) include/linux/netfilter.h:319 (discriminator 3) net/ipv6/ip6_input.c:351 (discriminator 3)) packet_sendmsg (net/packet/af_packet.c:3110 net/packet/af_packet.c:3142) __x64_sys_sendmmsg (net/socket.c:2883 net/socket.c:2880 net/socket.c:2880) packet_sendmsg (net/packet/af_packet.c:2959 net/packet/af_packet.c:3053 net/packet/af_packet.c:3142) __x64_sys_sendmmsg (net/socket.c:2883 net/socket.c:2880 net/socket.c:2880) The buggy address belongs to the object at ff110001039c6b40 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 8 bytes to the right of allocated 704-byte region [ff110001039c6b40, ff110001039c6e00) | ||||
| CVE-2026-97605 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: erofs: preserve LZMA decoders on resize failure The pool-resize path frees each stream's old decoder before allocating its replacement. If an allocation fails after some streams have already been replaced, the failed stream is put back on the list with state == NULL. z_erofs_lzma_max_dictsize is still advanced as if the whole pool had been resized. An existing LZMA mount can select the broken stream and pass NULL to xz_dec_microlzma_reset(). A retry at the same size also skip another resize attempt. Since the global maximum was advanced, thus, the invalid state is left unrepaired. Allocate each replacement before freeing the old decoder, temporarily retaining one old decoder during allocation. Stop at the first failure and advance z_erofs_lzma_max_dictsize only after all streams satisfy the request. Record each stream's dictionary capacity so retries can skip streams already enlarged before a partial failure. | ||||
| CVE-2026-97927 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ufs: create the root dentry after loading cylinder metadata ufs_fill_super() installed sb->s_root before it loaded the cylinder group structures for a writable mount: sb->s_root = d_make_root(inode); ... if (!sb_rdonly(sb)) if (!ufs_read_cylinder_structures(sb)) goto failed; When ufs_read_cylinder_structures() failed, the error path freed the in-core superblock information and set sb->s_fs_info to NULL while sb->s_root stayed installed. get_tree_bdev() then reached deactivate_locked_super(), and because s_root was present, generic_shutdown_super() called sync_filesystem() and the put_super operation. Both dereference UFS_SB(sb), which is now NULL, so a mount that fails only while reading the cylinder groups oopses during teardown. A crafted image whose first cylinder group cannot be read reaches this path. Load the cylinder group metadata first and create the root dentry last, so the superblock is published to the VFS only once it is fully set up. ufs_setup_cstotal() and ufs_read_cylinder_structures() take only the super_block and do not use the root inode, so the reordering is safe. | ||||
| CVE-2026-98002 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix ineffective error check in nested domain allocation amd_iommu_pdom_id_alloc() returns an int: a domain ID on success, or the negative errno from ida_alloc_range() when the ID space is exhausted or memory is short. amd_iommu_alloc_domain_nested() stores that return value in gdom_info->hdom_id, which is a u32, and only then tests it: gdom_info->hdom_id = amd_iommu_pdom_id_alloc(); if (gdom_info->hdom_id <= 0) { The assignment discards the sign, so -ENOSPC becomes 0xffffffe4 and the test never fires. The nested domain is then set up with a host domain ID that was never allocated, instead of the allocation failing with -ENOSPC. Keep the value in an int, test it there, and store it only once it is known to be valid, which is what the other amd_iommu_pdom_id_alloc() callers already do. | ||||
| CVE-2026-98096 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: restore network header before routing and forwarding ipv6_srh_rcv() runs with skb->data at the Segment Routing Header (SRH) while skb_network_header() points at the IPv6 header. When segments_left > 0, ipv6_srh_rcv() previously restored the skb->data position by pushing sizeof(struct ipv6hdr), assuming the SRH immediately followed the fixed IPv6 header. If another extension header (such as a Hop-by-Hop options header) precedes the SRH, skb_network_offset() remained negative. This led to two problems: 1. During ip6_route_input(), fib6_rules_early_flow_dissect() invokes __skb_flow_dissect() which passes the negative skb_network_offset() to flow dissection, breaking BPF and C flow dissector logic. 2. If forwarded via ip6_forward() or redirected via act_mirred, downstream handlers (like sch_fragment() or neighbour output) pass the negative offset as an unsigned length, triggering OOB memcpy or buffer overflows. Fix this by pushing -skb_network_offset(skb) before routing, ensuring skb_network_offset(skb) is 0 for route lookup / flow dissection as well as downstream forwarding. On the loopback path, pull skb_transport_offset(skb) to restore skb->data to the SRH before looping back. | ||||
| CVE-2026-98150 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix BPF_F_CPU validation for sparse CPU IDs BPF_F_CPU stores the target CPU ID in the upper 32 bits of the map operation flags. bpf_map_check_op_flags() currently compares that ID with num_possible_cpus(), which is the number of possible CPUs rather than a bound on CPU IDs. On an arm64 QEMU guest with a CPU device-tree hole, the possible CPU mask was 0,2-3. A userspace program using raw bpf() syscalls creates a BPF_MAP_TYPE_PERCPU_ARRAY and performs update and lookup operations for each CPU by setting BPF_F_CPU and the CPU ID in the flags. With the old check, CPU 1 is incorrectly accepted while valid CPU 3 is rejected with -ERANGE. The CPU 1 update then reaches the per-CPU map access path and triggers: Unable to handle kernel paging request at virtual address ... pc : __pi_memcpy_generic+0x5c/0x22c lr : bpf_percpu_array_update+0x2dc/0x2e8 Call trace: __pi_memcpy_generic bpf_map_update_value map_update_elem __sys_bpf Check the CPU ID against nr_cpu_ids and cpu_possible() instead. This rejects CPU IDs outside the valid range and CPUs absent from the possible mask, while allowing valid sparse CPU IDs. | ||||
| CVE-2026-97988 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost: invalidate vring access on IOTLB transitions When VIRTIO_F_ACCESS_PLATFORM changes, cached vring pointers and IOTLB metadata are interpreted in a different address space. Keeping them across the transition can leave stale ring mappings in use. Clearing d->iotlb before taking the VQ locks also lets a worker observe a transient NULL d->iotlb and fall back to d->umem while translating a descriptor. Add a common vhost_clear_device_iotlb() helper for vhost-net and vhost-vsock. Take all VQ mutexes in index order before dropping the device-wide IOTLB, invalidate each VQ's cached ring access and metadata, clear pending IOTLB messages, and free the old table after the handoff. This serializes the transition with workers and prevents mixed address space mappings. On the first direct-to-IOTLB transition, invalidate the cached vring addresses. When an existing device IOTLB is replaced, preserve the GIOVA ring addresses and reset only the metadata cache. After clearing ACCESS_PLATFORM, userspace must configure the vring addresses for the new address mode. vhost_vq_invalidate_access() clears desc, avail, and used together. Treat the VQ as invalidated only when all three are NULL, since a single GIOVA address may legitimately be zero. | ||||
| CVE-2026-97989 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vduse: validate virtqueue alignment vduse_validate_config() only checks the upper bound of vq_align. Invalid values can therefore reach vring_create_virtqueue_map(). The split-ring helpers use align - 1 as a bit mask, so the alignment must be a non-zero power of two. A zero value makes vring_size() drop the descriptor and available-ring part and vring_init() leave the used ring pointer NULL. The VIRTIO spec requires the used ring to start at an address aligned to at least 4 bytes. Reject values below VRING_USED_ALIGN_SIZE as well as non-power-of-two values before they reach the virtio ring helpers. Opening a virtio-net device created with vq_align=0 triggered: BUG: KASAN: null-ptr-deref in virtqueue_kick_prepare_split+0xe3/0x100 Read of size 2 at addr 0000000000000000 by task systemd-network/1062 Call Trace (relevant frames): dump_stack_lvl print_report kasan_report __asan_load2 virtqueue_kick_prepare_split+0xe3/0x100 virtqueue_kick_prepare+0x40/0x60 try_fill_recv+0x857/0x1250 virtnet_open+0x189/0x460 __dev_open+0x225/0x390 __dev_change_flags+0x368/0x3b0 netif_change_flags+0x56/0xc0 do_setlink.isra.0+0x68c/0x1e30 Validate the value before it reaches the virtio ring helpers. | ||||