| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| MiR100, MiR200 and other MiR robots use the Robot Operating System (ROS) default packages exposing the computational graph to all network interfaces, wireless and wired. This is the result of a bad set up and can be mitigated by appropriately configuring ROS and/or applying custom patches as appropriate. Currently, the ROS computational graph can be accessed fully from the wired exposed ports. In combination with other flaws such as CVE-2020-10269, the computation graph can also be fetched and interacted from wireless networks. This allows a malicious operator to take control of the ROS logic and correspondingly, the complete robot given that MiR's operations are centered around the framework (ROS). |
| Out of the wired and wireless interfaces within MiR100, MiR200 and other vehicles from the MiR fleet, it's possible to access the Control Dashboard on a hardcoded IP address. Credentials to such wireless interface default to well known and widely spread users (omitted) and passwords (omitted). This information is also available in past User Guides and manuals which the vendor distributed. This flaw allows cyber attackers to take control of the robot remotely and make use of the default user interfaces MiR has created, lowering the complexity of attacks and making them available to entry-level attackers. More elaborated attacks can also be established by clearing authentication and sending network requests directly. We have confirmed this flaw in MiR100 and MiR200 but according to the vendor, it might also apply to MiR250, MiR500 and MiR1000. |
| One of the wireless interfaces within MiR100, MiR200 and possibly (according to the vendor) other MiR fleet vehicles comes pre-configured in WiFi Master (Access Point) mode. Credentials to such wireless Access Point default to well known and widely spread SSID (MiR_RXXXX) and passwords (omitted). This information is also available in past User Guides and manuals which the vendor distributed. We have confirmed this flaw in MiR100 and MiR200 but it might also apply to MiR250, MiR500 and MiR1000. |
| Critical services for operation can be terminated from windows task manager, bringing the manipulator to a halt. After this a Re-Calibration of the brakes needs to be performed. Be noted that this only can be accomplished either by a Kuka technician or by Kuka issued calibration hardware that interfaces with the manipulator furthering the delay and increasing operational costs. |
| Universal Robots control box CB 3.1 across firmware versions (tested on 1.12.1, 1.12, 1.11 and 1.10) does not encrypt or protect in any way the intellectual property artifacts installed from the UR+ platform of hardware and software components (URCaps). These files (*.urcaps) are stored under '/root/.urcaps' as plain zip files containing all the logic to add functionality to the UR3, UR5 and UR10 robots. This flaw allows attackers with access to the robot or the robot network (while in combination with other flaws) to retrieve and easily exfiltrate all installed intellectual property. |
| UR+ (Universal Robots+) is a platform of hardware and software component sellers, for Universal Robots robots. When installing any of these components in the robots (e.g. in the UR10), no integrity checks are performed. Moreover, the SDK for making such components can be easily obtained from Universal Robots. An attacker could exploit this flaw by crafting a custom component with the SDK, performing Person-In-The-Middle attacks (PITM) and shipping the maliciously-crafted component on demand. |
| Universal Robots Robot Controllers Version CB2 SW Version 1.4 upwards, CB3 SW Version 3.0 and upwards, e-series SW Version 5.0 and upwards expose a service called DashBoard server at port 29999 that allows for control over core robot functions like starting/stopping programs, shutdown, reset safety and more. The DashBoard server is not protected by any kind of authentication or authorization. |
| CB3 SW Version 3.3 and upwards, e-series SW Version 5.0 and upwards allow authenticated access to the RTDE (Real-Time Data Exchange) interface on port 30004 which allows setting registers, the speed slider fraction as well as digital and analog Outputs. Additionally unautheticated reading of robot data is also possible |
| An issue was discovered on XIAOMI XIAOAI speaker Pro LX06 1.52.4. Attackers can get root shell by accessing the UART interface and then they can (i) read Wi-Fi SSID or password, (ii) read the dialogue text files between users and XIAOMI XIAOAI speaker Pro LX06, (iii) use Text-To-Speech tools pretend XIAOMI speakers' voice achieve social engineering attacks, (iv) eavesdrop on users and record what XIAOMI XIAOAI speaker Pro LX06 hears, (v) modify system files, (vi) use commands to send any IR code through IR emitter on XIAOMI XIAOAI Speaker Pro LX06, (vii) stop voice assistant service, (viii) enable the XIAOMI XIAOAI Speaker Pro’ SSH or TELNET service as a backdoor, (IX) tamper with the router configuration of the router in the local area networks. |
| An issue was discovered on XIAOMI XIAOAI speaker Pro LX06 1.58.10. Attackers can activate the failsafe mode during the boot process, and use the mi_console command cascaded by the SN code shown on the product to get the root shell password, and then the attacker can (i) read Wi-Fi SSID or password, (ii) read the dialogue text files between users and XIAOMI XIAOAI speaker Pro LX06, (iii) use Text-To-Speech tools pretend XIAOMI speakers' voice achieve social engineering attacks, (iv) eavesdrop on users and record what XIAOMI XIAOAI speaker Pro LX06 hears, (v) modify system files, (vi) use commands to send any IR code through IR emitter on XIAOMI XIAOAI Speaker Pro (LX06), (vii) stop voice assistant service, (viii) enable the XIAOMI XIAOAI Speaker Pro’s SSH or TELNET service as a backdoor, (IX) tamper with the router configuration of the router in the local area networks. |
| The ThemeREX Addons plugin before 2020-03-09 for WordPress lacks access control on the /trx_addons/v2/get/sc_layout REST API endpoint, allowing for PHP functions to be executed by any users, because includes/plugin.rest-api.php calls trx_addons_rest_get_sc_layout with an unsafe sc parameter. |
| An issue was discovered in beta versions of the 1Password command-line tool prior to 0.5.5 and in beta versions of the 1Password SCIM bridge prior to 0.7.3. An insecure random number generator was used to generate various keys. An attacker with access to the user's encrypted data may be able to perform brute-force calculations of encryption keys and thus succeed at decryption. |
| Modern DRAM chips (DDR4 and LPDDR4 after 2015) are affected by a vulnerability in deployment of internal mitigations against RowHammer attacks known as Target Row Refresh (TRR), aka the TRRespass issue. To exploit this vulnerability, the attacker needs to create certain access patterns to trigger bit flips on affected memory modules, aka a Many-sided RowHammer attack. This means that, even when chips advertised as RowHammer-free are used, attackers may still be able to conduct privilege-escalation attacks against the kernel, conduct privilege-escalation attacks against the Sudo binary, and achieve cross-tenant virtual-machine access by corrupting RSA keys. The issue affects chips produced by SK Hynix, Micron, and Samsung. NOTE: tracking DRAM supply-chain issues is not straightforward because a single product model from a single vendor may use DRAM chips from different manufacturers. |
| An issue was discovered in ownCloud before 10.4. An attacker can bypass authentication on a password-protected image by displaying its preview. |
| An issue was discovered in ownCloud before 10.4. Because of an SSRF issue (via the apps/files_sharing/external remote parameter), an authenticated attacker can interact with local services blindly (aka Blind SSRF) or conduct a Denial Of Service attack. |
| In ImageMagick 7.0.9, an out-of-bounds read vulnerability exists within the ReadHEICImageByID function in coders\heic.c. It can be triggered via an image with a width or height value that exceeds the actual size of the image. |
| BWA DiREX-Pro 1.2181 devices allow remote attackers to execute arbitrary OS commands via shell metacharacters in the PKG parameter to uninstall.php3. |
| BWA DiREX-Pro 1.2181 devices allow full path disclosure via an invalid name array parameter to val_soft.php3. |
| BWA DiREX-Pro 1.2181 devices allow remote attackers to discover passwords via a direct request to val_users.php3. |
| MISP 2.4.122 has Persistent XSS in the sighting popover tool. This is related to app/View/Elements/Events/View/sighting_field.ctp. |
