| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| NanoMQ MQTT Broker (NanoMQ) is an all-around Edge Messaging Platform. In version 0.24.6, by generating a combined traffic pattern of high-frequency publishes and rapid reconnect/kick-out using the same ClientID and massive subscribe/unsubscribe jitter, it is possible to reliably trigger heap memory corruption in the Broker process, causing it to exit immediately with SIGABRT due to free(): invalid pointer. As of time of publication, no known patched versions are available. |
| A vulnerability was identified in the email parsing library due to improper handling of specially formatted recipient email addresses. An attacker can exploit this flaw by crafting a recipient address that embeds an external address within quotes. This causes the application to misdirect the email to the attacker's external address instead of the intended internal recipient. This could lead to a significant data leak of sensitive information and allow an attacker to bypass security filters and access controls. |
| OpenClaw versions prior to 2026.2.19 construct RegExp objects directly from unescaped Feishu mention metadata in the stripBotMention function, allowing regex injection and denial of service. Attackers can craft nested-quantifier patterns or metacharacters in mention metadata to trigger catastrophic backtracking, block message processing, or remove unintended content before model processing. |
| A vulnerability was found in Golang FIPS OpenSSL. This flaw allows a malicious user to randomly cause an uninitialized buffer length variable with a zeroed buffer to be returned in FIPS mode. It may also be possible to force a false positive match between non-equal hashes when comparing a trusted computed hmac sum to an untrusted input sum if an attacker can send a zeroed buffer in place of a pre-computed sum. It is also possible to force a derived key to be all zeros instead of an unpredictable value. This may have follow-on implications for the Go TLS stack. |
| OpenClaw versions prior to 2026.3.2 contain a path-confinement bypass vulnerability in browser output handling that allows writes outside intended root directories. Attackers can exploit insufficient canonical path-boundary validation in file write operations to escape root-bound restrictions and write files to arbitrary locations. |
| OpenClaw versions prior to 2026.3.2 contain a DNS pinning bypass vulnerability in strict URL fetch paths that allows attackers to circumvent SSRF guards when environment proxy variables are configured. When HTTP_PROXY, HTTPS_PROXY, or ALL_PROXY environment variables are present, attacker-influenced URLs can be routed through proxy behavior instead of pinned-destination routing, enabling access to internal targets reachable from the proxy environment. |
| A flaw was found in the X.org server. Due to improperly tracked allocation size in _XkbSetCompatMap, a local attacker may be able to trigger a buffer overflow condition via a specially crafted payload, leading to denial of service or local privilege escalation in distributions where the X.org server is run with root privileges. |
| OpenClaw versions prior to 2026.2.22 in macOS node-host system.run contain an allowlist bypass vulnerability that allows remote attackers to execute non-allowlisted commands by exploiting improper parsing of command substitution tokens. Attackers can craft shell payloads with command substitution syntax within double-quoted text to bypass security restrictions and execute arbitrary commands on the system. |
| A flaw was found in coredns. This issue could lead to invalid cache entries returning due to incorrectly implemented caching. |
| A flaw was found in the Submariner project. Due to unnecessary role-based access control permissions, a privileged attacker can run a malicious container on a node that may allow them to steal service account tokens and further compromise other nodes and potentially the entire cluster. |
| A vulnerability was found in MariaDB. An OpenVAS port scan on ports 3306 and 4567 allows a malicious remote client to cause a denial of service. |
| IncusOS is an immutable OS image dedicated to running Incus. Prior to 202603142010, the default configuration of systemd-cryptenroll as used by IncusOS through mkosi allows for an attacker with physical access to the machine to access the encrypted data without requiring any interaction by the system's owner or any tampering of Secure Boot state or kernel (UKI) boot image. That's because in this configuration, the LUKS key is made available by the TPM so long as the system has the expected PCR7 value and the PCR11 policy matches. That default PCR11 policy importantly allows for the TPM to release the key to the booted system rather than just from the initrd part of the signed kernel image (UKI). The attack relies on the attacker being able to substitute the original encrypted root partition for one that they control. By doing so, the system will prompt for a recovery key on boot, which the attacker has defined and can provide, before booting the system using the attacker's root partition rather than the system's original one. The attacker only needs to put a systemd unit starting on system boot within their root partition to have the system run that logic on boot. That unit will then run in an environment where the TPM will allow for the retrieval of the encryption key of the real root disk, allowing the attacker to steal the LUKS volume key (immutable master key) and then use it against the real root disk, altering it or getting data out before putting the disk back the way it was and returning the system without a trace of this attack having happened. This is all possible because the system will have still booted with Secure Boot enabled, will have measured and ran the expected bootloader and kernel image (UKI). The initrd selects the root disk based on GPT partition identifiers making it possible to easily substitute the real root disk for an attacker controlled one. This doesn't lead to any change in the TPM state and therefore allows for retrieval of the LUKS key by the attacker through a boot time systemd unit on their alternative root partition. IncusOS version 202603142010 (2026/03/14 20:10 UTC) includes the new PCR15 logic and will automatically update the TPM policy on boot. Anyone suspecting that their system may have been physically accessed while shut down should perform a full system wipe and reinstallation as only that will rotate the LUKS volume key and prevent subsequent access to the encrypted data should the system have been previously compromised. There are no known workarounds other than updating to a version with corrected logic which will automatically rebind the LUKS keys to the new set of TPM registers and prevent this from being exploited. |
| Craft CMS is a content management system (CMS). From version 4.0.0-RC1 to before version 4.17.6 and from version 5.0.0-RC1 to before version 5.9.12, a low-privilege user (or an unauthenticated user who has been sent a shared URL) can escalate their privileges to admin by abusing UsersController->actionImpersonateWithToken. This issue has been patched in versions 4.17.6 and 5.9.12. |
| cpp-httplib is a C++11 single-file header-only cross platform HTTP/HTTPS library. Prior to 0.37.1, when a cpp-httplib client uses the streaming API (httplib::stream::Get, httplib::stream::Post, etc.), the library calls std::stoull() directly on the Content-Length header value received from the server with no input validation and no exception handling. std::stoull throws std::invalid_argument for non-numeric strings and std::out_of_range for values exceeding ULLONG_MAX. Since nothing catches these exceptions, the C++ runtime calls std::terminate(), which kills the process with SIGABRT. Any server the client connects to — including servers reached via HTTP redirects, third-party APIs, or man-in-the-middle positions can crash the client application with a single HTTP response. No authentication is required. No interaction from the end user is required. The crash is deterministic and immediate. This vulnerability is fixed in 0.37.1. |
| The Writeprint Stylometry plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'p' GET parameter in all versions up to and including 0.1. This is due to insufficient input sanitization and output escaping in the bjl_wprintstylo_comments_nav() function. The function directly outputs the $_GET['p'] parameter into an HTML href attribute without any escaping. This makes it possible for authenticated attackers with Contributor-level permissions or higher to inject arbitrary web scripts in pages that execute if they can successfully trick another user into performing an action such as clicking on a link. |
| Glances is an open-source system cross-platform monitoring tool. The GHSA-gh4x fix (commit 5d3de60) addressed unauthenticated configuration secrets exposure on the `/api/v4/config` endpoints by introducing `as_dict_secure()` redaction. However, the `/api/v4/args` and `/api/v4/args/{item}` endpoints were not addressed by this fix. These endpoints return the complete command-line arguments namespace via `vars(self.args)`, which includes the password hash (salt + pbkdf2_hmac), SNMP community strings, SNMP authentication keys, and the configuration file path. When Glances runs without `--password` (the default), these endpoints are accessible without any authentication. Version 4.5.2 provides a more complete fix. |
| Next Click Ventures RealtyScript 4.0.2 contains SQL injection vulnerabilities that allow unauthenticated attackers to manipulate database queries by injecting arbitrary SQL code through the GET parameter 'u_id' in /admin/users.php and the POST parameter 'agent[]' in /admin/mailer.php. Attackers can exploit time-based blind SQL injection techniques to extract sensitive database information or cause denial of service through sleep-based payloads. |
| Dagu is a workflow engine with a built-in Web user interface. Prior to 2.2.4, the dagRunId request field accepted by the inline DAG execution endpoints is passed directly into filepath.Join to construct a temporary directory path without any format validation. Go's filepath.Join resolves .. segments lexically, so a caller can supply a value such as ".." to redirect the computed directory outside the intended /tmp/<name>/<id> path. A deferred cleanup function that calls os.RemoveAll on that directory then runs unconditionally when the HTTP handler returns, deleting whatever directory the traversal resolved to. With dagRunId set to "..", the resolved directory is the system temporary directory (/tmp on Linux). On non-root deployments, os.RemoveAll("/tmp") removes all files in /tmp owned by the dagu process user, disrupting every concurrent dagu run that has live temp files. On root or Docker deployments, the call removes the entire contents of /tmp, causing a system-wide denial of service. This vulnerability is fixed in 2.2.4. |
| CairoSVG is an SVG converter based on Cairo, a 2D graphics library. Prior to Kozea/CairoSVG has exponential denial of service via recursive <use> element amplification in cairosvg/defs.py. This causes CPU exhaustion from a small input. |
| A flaw was found in Keycloak. A remote attacker could bypass security controls by sending a valid SAML response from an external Identity Provider (IdP) to the Keycloak SAML endpoint for IdP-initiated broker logins. This allows the attacker to complete broker logins even when the SAML Identity Provider is disabled, leading to unauthorized authentication. |
