| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| gRPC-Go is the Go language implementation of gRPC. Versions prior to 1.79.3 have an authorization bypass resulting from improper input validation of the HTTP/2 `:path` pseudo-header. The gRPC-Go server was too lenient in its routing logic, accepting requests where the `:path` omitted the mandatory leading slash (e.g., `Service/Method` instead of `/Service/Method`). While the server successfully routed these requests to the correct handler, authorization interceptors (including the official `grpc/authz` package) evaluated the raw, non-canonical path string. Consequently, "deny" rules defined using canonical paths (starting with `/`) failed to match the incoming request, allowing it to bypass the policy if a fallback "allow" rule was present. This affects gRPC-Go servers that use path-based authorization interceptors, such as the official RBAC implementation in `google.golang.org/grpc/authz` or custom interceptors relying on `info.FullMethod` or `grpc.Method(ctx)`; AND that have a security policy contains specific "deny" rules for canonical paths but allows other requests by default (a fallback "allow" rule). The vulnerability is exploitable by an attacker who can send raw HTTP/2 frames with malformed `:path` headers directly to the gRPC server. The fix in version 1.79.3 ensures that any request with a `:path` that does not start with a leading slash is immediately rejected with a `codes.Unimplemented` error, preventing it from reaching authorization interceptors or handlers with a non-canonical path string. While upgrading is the most secure and recommended path, users can mitigate the vulnerability using one of the following methods: Use a validating interceptor (recommended mitigation); infrastructure-level normalization; and/or policy hardening. |
| HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to version 6.9.0, when setting headers in HTTP requests, the internal HTTP client sends headers first to the host in the initial URL but also, if asked to follow redirects and a 30X HTTP response code is returned, to the host mentioned in URL in the Location: response header value. Sending the same set of headers to subsequent hosts is a problem as this header often contains privacy sensitive information or data that could allow others to impersonate the client's request. This issue has been patched in release 6.9.0. No known workarounds are available. |
| Halloy is an IRC application written in Rust. In versions on \*nix and macOS prior to commit f180e41061db393acf65bc99f5c5e7397586d9cb, halloy creates its config directory and files using default umask permissions, which typically results in `0644` on files and `0755` on directories. This allows any local user on the system to read plaintext credentials stored in `config.toml` or referenced `password_file` paths. Commit f180e41061db393acf65bc99f5c5e7397586d9cb patches the issue. |
| Halloy is an IRC application written in Rust. Prior to commit 0f77b2cfc5f822517a256ea5a4b94bad8bfe38b6, the DCC receive flow did not sanitize filenames from incoming `DCC SEND` requests. A remote IRC user could send a filename with path traversal sequences like `../../.ssh/authorized_keys` and the file would be written outside the user's configured `save_directory`. With auto-accept enabled this required zero interaction from the victim. Starting with commit 0f77b2cfc5f822517a256ea5a4b94bad8bfe38b6, all identified code paths sanitize filenames through a shared `sanitize_filename` function. |
| The WebSocket backend uses charging station identifiers to uniquely associate sessions but allows multiple endpoints to connect using the same session identifier. This implementation results in predictable session identifiers and enables session hijacking or shadowing, where the most recent connection displaces the legitimate charging station and receives backend commands intended for that station. This vulnerability may allow unauthorized users to authenticate as other users or enable a malicious actor to cause a denial-of-service condition by overwhelming the backend with valid session requests. |
| Charging station authentication identifiers are publicly accessible via web-based mapping platforms. |
| The WebSocket Application Programming Interface lacks restrictions on the number of authentication requests. This absence of rate limiting may allow an attacker to conduct denial-of-service attacks by suppressing or mis-routing legitimate charger telemetry, or conduct brute-force attacks to gain unauthorized access. |
| The WebSocket Application Programming Interface lacks restrictions on the number of authentication requests. This absence of rate limiting may allow an attacker to conduct denial-of-service attacks by suppressing or mis-routing legitimate charger telemetry, or conduct brute-force attacks to gain unauthorized access. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| WebSocket endpoints lack proper authentication mechanisms, enabling attackers to perform unauthorized station impersonation and manipulate data sent to the backend. An unauthenticated attacker can connect to the OCPP WebSocket endpoint using a known or discovered charging station identifier, then issue or receive OCPP commands as a legitimate charger. Given that no authentication is required, this can lead to privilege escalation, unauthorized control of charging infrastructure, and corruption of charging network data reported to the backend. |
| Charging station authentication identifiers are publicly accessible via web-based mapping platforms. |
| The WebSocket backend uses charging station identifiers to uniquely associate sessions but allows multiple endpoints to connect using the same session identifier. This implementation results in predictable session identifiers and enables session hijacking or shadowing, where the most recent connection displaces the legitimate charging station and receives backend commands intended for that station. This vulnerability may allow unauthorized users to authenticate as other users or enable a malicious actor to cause a denial-of-service condition by overwhelming the backend with valid session requests. |
| WebSocket endpoints lack proper authentication mechanisms, enabling attackers to perform unauthorized station impersonation and manipulate data sent to the backend. An unauthenticated attacker can connect to the OCPP WebSocket endpoint using a known or discovered charging station identifier, then issue or receive OCPP commands as a legitimate charger. Given that no authentication is required, this can lead to privilege escalation, unauthorized control of charging
infrastructure, and corruption of charging network data reported to the backend. |
| Requires malware code to misuse the DDK kernel module IOCTL interface.
Such code can use the interface in an unsupported way that allows subversion of the GPU to perform writes to arbitrary physical memory pages.
The product utilises a shared resource in a concurrent manner but does not attempt to synchronise access to the resource. |
| A web page that contains unusual GPU shader code is loaded into the GPU compiler process and can trigger a write out-of-bounds write crash in the GPU shader compiler library. On certain platforms, when the compiler process has system privileges this could enable further exploits on the device.
An edge case using a very large value in switch statements in GPU shader code can cause a segmentation fault in the GPU shader compiler due to an out-of-bounds write access. |
| A vulnerability was determined in Mindinventory MindSQL up to 0.2.1. The affected element is the function ask_db of the file mindsql/core/mindsql_core.py. Executing a manipulation can lead to sql injection. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in Mindinventory MindSQL up to 0.2.1. Impacted is the function ask_db of the file mindsql/core/mindsql_core.py. Performing a manipulation results in code injection. The attack can be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The Kali Forms plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 2.4.9 via the 'form_process' function. This is due to the 'prepare_post_data' function mapping user-supplied keys directly into internal placeholder storage, combined with the use of 'call_user_func' on these placeholder values. This makes it possible for unauthenticated attackers to execute code on the server. |
| Statamic is a Laravel and Git powered content management system (CMS). Prior to versions 5.73.14 and 6.7.0, low-privileged Control Panel users could create taxonomy terms by submitting requests to the field action processing endpoint with attacker-controlled field definitions. This bypasses the authorization checks enforced on the standard taxonomy term creation endpoint. This has been fixed in 5.73.14 and 6.7.0. |
| Statamic is a Laravel and Git powered content management system (CMS). Prior to versions 5.73.14 and 6.7.0, a stored XSS vulnerability in SVG asset reuploads allows authenticated users with asset upload permissions to bypass SVG sanitization and inject malicious JavaScript that executes when the asset is viewed. This has been fixed in 5.73.14 and 6.7.0. |
