| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A security flaw has been discovered in MineAdmin 1.x/2.x. This affects an unknown function of the component Swagger. The manipulation results in information disclosure. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx: disable gfx9 cp_ecc_error_irq only when enabling legacy gfx ras
gfx9 cp_ecc_error_irq is only enabled when legacy gfx ras is assert.
So in gfx_v9_0_hw_fini, interrupt disablement for cp_ecc_error_irq
should be executed under such condition, otherwise, an amdgpu_irq_put
calltrace will occur.
[ 7283.170322] RIP: 0010:amdgpu_irq_put+0x45/0x70 [amdgpu]
[ 7283.170964] RSP: 0018:ffff9a5fc3967d00 EFLAGS: 00010246
[ 7283.170967] RAX: ffff98d88afd3040 RBX: ffff98d89da20000 RCX: 0000000000000000
[ 7283.170969] RDX: 0000000000000000 RSI: ffff98d89da2bef8 RDI: ffff98d89da20000
[ 7283.170971] RBP: ffff98d89da20000 R08: ffff98d89da2ca18 R09: 0000000000000006
[ 7283.170973] R10: ffffd5764243c008 R11: 0000000000000000 R12: 0000000000001050
[ 7283.170975] R13: ffff98d89da38978 R14: ffffffff999ae15a R15: ffff98d880130105
[ 7283.170978] FS: 0000000000000000(0000) GS:ffff98d996f00000(0000) knlGS:0000000000000000
[ 7283.170981] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7283.170983] CR2: 00000000f7a9d178 CR3: 00000001c42ea000 CR4: 00000000003506e0
[ 7283.170986] Call Trace:
[ 7283.170988] <TASK>
[ 7283.170989] gfx_v9_0_hw_fini+0x1c/0x6d0 [amdgpu]
[ 7283.171655] amdgpu_device_ip_suspend_phase2+0x101/0x1a0 [amdgpu]
[ 7283.172245] amdgpu_device_suspend+0x103/0x180 [amdgpu]
[ 7283.172823] amdgpu_pmops_freeze+0x21/0x60 [amdgpu]
[ 7283.173412] pci_pm_freeze+0x54/0xc0
[ 7283.173419] ? __pfx_pci_pm_freeze+0x10/0x10
[ 7283.173425] dpm_run_callback+0x98/0x200
[ 7283.173430] __device_suspend+0x164/0x5f0
v2: drop gfx11 as it's fixed in a different solution by retiring cp_ecc_irq funcs(Hawking) |
| A weakness has been identified in MineAdmin 1.x/2.x. This impacts the function refresh of the file /system/refresh of the component JWT Token Handler. This manipulation causes insufficient verification of data authenticity. It is possible to initiate the attack remotely. The attack is considered to have high complexity. The exploitability is said to be difficult. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in MineAdmin 1.x/2.x. Affected is an unknown function of the file /system/getFileInfoById. Such manipulation of the argument ID leads to information disclosure. It is possible to launch the attack remotely. The attack requires a high level of complexity. The exploitability is told to be difficult. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was detected in MineAdmin 1.x/2.x. Affected by this vulnerability is an unknown functionality of the file /system/downloadById. Performing a manipulation of the argument ID results in information disclosure. The attack can be initiated remotely. The attack's complexity is rated as high. The exploitation appears to be difficult. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
pwm: lpc32xx: Remove handling of PWM channels
Because LPC32xx PWM controllers have only a single output which is
registered as the only PWM device/channel per controller, it is known in
advance that pwm->hwpwm value is always 0. On basis of this fact
simplify the code by removing operations with pwm->hwpwm, there is no
controls which require channel number as input.
Even though I wasn't aware at the time when I forward ported that patch,
this fixes a null pointer dereference as lpc32xx->chip.pwms is NULL
before devm_pwmchip_add() is called. |
| jaraco.context, an open-source software package that provides some useful decorators and context managers, has a Zip Slip path traversal vulnerability in the `jaraco.context.tarball()` function starting in version 5.2.0 and prior to version 6.1.0. The vulnerability may allow attackers to extract files outside the intended extraction directory when malicious tar archives are processed. The strip_first_component filter splits the path on the first `/` and extracts the second component, while allowing `../` sequences. Paths like `dummy_dir/../../etc/passwd` become `../../etc/passwd`. Note that this suffers from a nested tarball attack as well with multi-level tar files such as `dummy_dir/inner.tar.gz`, where the inner.tar.gz includes a traversal `dummy_dir/../../config/.env` that also gets translated to `../../config/.env`. Version 6.1.0 contains a patch for the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: improve error handling from ext4_dirhash()
The ext4_dirhash() will *almost* never fail, especially when the hash
tree feature was first introduced. However, with the addition of
support of encrypted, casefolded file names, that function can most
certainly fail today.
So make sure the callers of ext4_dirhash() properly check for
failures, and reflect the errors back up to their callers. |
| Delta Electronics DIAView has multiple vulnerabilities. |
| Delta Electronics DIAView has multiple vulnerabilities. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/MCE/AMD: Use an u64 for bank_map
Thee maximum number of MCA banks is 64 (MAX_NR_BANKS), see
a0bc32b3cacf ("x86/mce: Increase maximum number of banks to 64").
However, the bank_map which contains a bitfield of which banks to
initialize is of type unsigned int and that overflows when those bit
numbers are >= 32, leading to UBSAN complaining correctly:
UBSAN: shift-out-of-bounds in arch/x86/kernel/cpu/mce/amd.c:1365:38
shift exponent 32 is too large for 32-bit type 'int'
Change the bank_map to a u64 and use the proper BIT_ULL() macro when
modifying bits in there.
[ bp: Rewrite commit message. ] |
| A vulnerability has been found in Yonyou KSOA 9.0. The impacted element is an unknown function of the file /worksheet/del_work.jsp of the component HTTP GET Parameter Handler. The manipulation of the argument ID leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Reflected Cross-Site Scripting (XSS) vulnerability in IsMyGym by Zuinq Studio. This vulnerability allows an attacker to execute JavaScript code in the victim's browser by sending them a malicious URL with '/<PATH>.php/<XSS>'. This vulnerability can be exploited to steal sensitive user data, such as session cookies, or to perform actions on behalf of the user. |
| A vulnerability was found in Yonyou KSOA 9.0. This affects an unknown function of the file /worksheet/del_workplan.jsp of the component HTTP GET Parameter Handler. The manipulation of the argument ID results in sql injection. The attack can be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| tarteaucitron.js is a compliant and accessible cookie banner. Prior to 1.29.0, a Regular Expression Denial of Service (ReDoS) vulnerability was identified in tarteaucitron.js in the handling of the issuu_id parameter. This vulnerability is fixed in 1.29.0. |
| Hono is a Web application framework that provides support for any JavaScript runtime. Prior to 4.11.4, there is a flaw in Hono’s JWK/JWKS JWT verification middleware allowed the JWT header’s alg value to influence signature verification when the selected JWK did not explicitly specify an algorithm. This could enable JWT algorithm confusion and, in certain configurations, allow forged tokens to be accepted. As part of this fix, the JWT middleware now requires the alg option to be explicitly specified. This prevents algorithm confusion by ensuring that the verification algorithm is not derived from untrusted JWT header values. This vulnerability is fixed in 4.11.4. |
| A vulnerability was determined in Yonyou KSOA 9.0. This impacts an unknown function of the file /worksheet/work_info.jsp of the component HTTP GET Parameter Handler. This manipulation of the argument ID causes sql injection. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| Hono is a Web application framework that provides support for any JavaScript runtime. Prior to 4.11.4, there is a flaw in Hono’s JWK/JWKS JWT verification middleware allowed the algorithm specified in the JWT header to influence signature verification when the selected JWK did not explicitly define an algorithm. This could enable JWT algorithm confusion and, in certain configurations, allow forged tokens to be accepted. The JWK/JWKS JWT verification middleware has been updated to require an explicit allowlist of asymmetric algorithms when verifying tokens. The middleware no longer derives the verification algorithm from untrusted JWT header values. This vulnerability is fixed in 4.11.4. |
| A vulnerability was identified in Yonyou KSOA 9.0. Affected is an unknown function of the file /worksheet/work_mod.jsp of the component HTTP GET Parameter Handler. Such manipulation of the argument ID leads to sql injection. The attack may be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Stored Cross-Site Scripting (XSS) in Poultry Farm Management System v1.0 due to the lack of proper validation of user input by sending a POST request. The relationship between parameters and assigned identifiers is as follows:
'companyaddress', 'companyemail', 'companyname', 'country', 'mobilenumber' y 'regno' parameters in '/farm/farmprofile.php'. |
