| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Uninitialized Use in ANGLE in Google Chrome prior to 148.0.7778.216 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250: Fix TX deadlock when using DMA
`dmaengine_terminate_async` does not guarantee that the
`__dma_tx_complete` callback will run. The callback is currently the
only place where `dma->tx_running` gets cleared. If the transaction is
canceled and the callback never runs, then `dma->tx_running` will never
get cleared and we will never schedule new TX DMA transactions again.
This change makes it so we clear `dma->tx_running` after we terminate
the DMA transaction. This is "safe" because `serial8250_tx_dma_flush`
is holding the UART port lock. The first thing the callback does is also
grab the UART port lock, so access to `dma->tx_running` is serialized. |
| A CWE-119:Improper restriction of operations within the bounds of a memory buffer vulnerability exists in PowerLogic ION8650, ION8800, ION7650, ION7700/73xx, and ION83xx/84xx/85xx/8600 (see security notifcation for affected versions), which could cause the meter to reboot. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: validate DFA start states are in bounds in unpack_pdb
Start states are read from untrusted data and used as indexes into the
DFA state tables. The aa_dfa_next() function call in unpack_pdb() will
access dfa->tables[YYTD_ID_BASE][start], and if the start state exceeds
the number of states in the DFA, this results in an out-of-bound read.
==================================================================
BUG: KASAN: slab-out-of-bounds in aa_dfa_next+0x2a1/0x360
Read of size 4 at addr ffff88811956fb90 by task su/1097
...
Reject policies with out-of-bounds start states during unpacking
to prevent the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix type confusion in l2cap_ecred_reconf_rsp()
l2cap_ecred_reconf_rsp() casts the incoming data to struct
l2cap_ecred_conn_rsp (the ECRED *connection* response, 8 bytes with
result at offset 6) instead of struct l2cap_ecred_reconf_rsp (2 bytes
with result at offset 0).
This causes two problems:
- The sizeof(*rsp) length check requires 8 bytes instead of the
correct 2, so valid L2CAP_ECRED_RECONF_RSP packets are rejected
with -EPROTO.
- rsp->result reads from offset 6 instead of offset 0, returning
wrong data when the packet is large enough to pass the check.
Fix by using the correct type. Also pass the already byte-swapped
result variable to BT_DBG instead of the raw __le16 field. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't irele after failing to iget in xfs_attri_recover_work
xlog_recovery_iget* never set @ip to a valid pointer if they return
an error, so this irele will walk off a dangling pointer. Fix that. |
| A vulnerability was determined in postcss up to 7.1.1. Affected is the function toString of the file src/selectors/container.js of the component AST Serialization. Executing a manipulation can lead to uncontrolled recursion. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor explains, that according to his definition "DoS on server-side on user-generated CSS is low risk for us (since most users compile own CSS with PostCSS)." |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Fix not releasing workqueue on .release()
The workqueue associated with an DSA/IAA device is not released when
the object is freed. |
| A weakness has been identified in ulisesbocchio jasypt-spring-boot up to 3.0.5/4.0.4. Affected by this vulnerability is the function getSecretKeySaltGenerator of the file jasypt-spring-boot/src/main/java/com/ulisesbocchio/jasyptspringboot/encryptor/SimpleGCMConfig.java of the component Password Hash Handler. Executing a manipulation can lead to use of a one-way hash with a predictable salt. The attack can be launched remotely. The attack requires a high level of complexity. The exploitation appears to be difficult. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: always drain queued discard work in ext4_mb_release()
While reviewing recent ext4 patch[1], Sashiko raised the following
concern[2]:
> If the filesystem is initially mounted with the discard option,
> deleting files will populate sbi->s_discard_list and queue
> s_discard_work. If it is then remounted with nodiscard, the
> EXT4_MOUNT_DISCARD flag is cleared, but the pending s_discard_work is
> neither cancelled nor flushed.
[1] https://lore.kernel.org/r/20260319094545.19291-1-qiang.zhang@linux.dev/
[2] https://sashiko.dev/#/patchset/20260319094545.19291-1-qiang.zhang%40linux.dev
The concern was valid, but it had nothing to do with the patch[1].
One of the problems with Sashiko in its current (early) form is that
it will detect pre-existing issues and report it as a problem with the
patch that it is reviewing.
In practice, it would be hard to hit deliberately (unless you are a
malicious syzkaller fuzzer), since it would involve mounting the file
system with -o discard, and then deleting a large number of files,
remounting the file system with -o nodiscard, and then immediately
unmounting the file system before the queued discard work has a change
to drain on its own.
Fix it because it's a real bug, and to avoid Sashiko from raising this
concern when analyzing future patches to mballoc.c. |
| A vulnerability was identified in SourceCodester SUP Online Shopping 1.0. The impacted element is an unknown function of the file /admin/productedit.php. The manipulation of the argument productName leads to cross site scripting. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. |
| A security vulnerability has been detected in Tenda F456 1.0.0.5. This affects the function frmL7ImForm of the file /goform/L7Im. The manipulation of the argument page leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. |
| A security vulnerability has been detected in Besen BS20 EV Charging Station up to 20260426. This affects an unknown part of the component BLE/WiFi. Such manipulation leads to authentication bypass by capture-replay. The attack must be carried out from within the local network. Attacks of this nature are highly complex. It is indicated that the exploitability is difficult. The original disclosure mentions, that "[t]hese vulnerabilities have been reported to Besen and we have received their acknowlegement that they are reviewing this as of April 2026." |
| A vulnerability was identified in Totolink A8000RU 7.1cu.643_b20200521. This affects the function setDdnsCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Such manipulation of the argument provider leads to os command injection. The attack may be launched remotely. The exploit is publicly available and might be used. |
| This CVE ID has been rejected by its CVE Numbering Authority (CNA). It was determined that the -p flag behavior is documented in Anthropic's claude -h output with an explicit warning that non-interactive mode should only be used in trusted directories, making this intended and described behavior rather than a vulnerability. |
| This CVE ID has been rejected by its CVE Numbering Authority (CNA). It was determined that the affected code path cannot be triggered through normal usage of Claude Code. |
| This CVE ID has been rejected by the its CVE Numbering Authority (CNA). It was determined that the attack requires an attacker to already control arbitrary environment variables, a level of access they consider functionally equivalent to code execution and outside the threat model of CLI tools. |
| Vulnerability in the Oracle Payments product of Oracle E-Business Suite (component: File Transmission). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Payments. Successful attacks of this vulnerability can result in takeover of Oracle Payments. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H). |
| Vulnerability in Oracle REST Data Services (component: Mongoapi). Supported versions that are affected are 24.2.0-26.1.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTPS to compromise Oracle REST Data Services. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle REST Data Services. CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H). |
| Vulnerability in Oracle REST Data Services (component: Mongoapi). Supported versions that are affected are 24.2.0-26.1.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTPS to compromise Oracle REST Data Services. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle REST Data Services accessible data. CVSS 3.1 Base Score 5.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N). |
