| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Fix segfault when updating ftrace mask
Fix invalid data access by passing right data for debugfs entry.
[ 171.549793] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 171.559248] Mem abort info:
[ 171.562173] ESR = 0x0000000096000044
[ 171.566227] EC = 0x25: DABT (current EL), IL = 32 bits
[ 171.573108] SET = 0, FnV = 0
[ 171.576448] EA = 0, S1PTW = 0
[ 171.579745] FSC = 0x04: level 0 translation fault
[ 171.584760] Data abort info:
[ 171.588012] ISV = 0, ISS = 0x00000044, ISS2 = 0x00000000
[ 171.593734] CM = 0, WnR = 1, TnD = 0, TagAccess = 0
[ 171.598962] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 171.604471] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000083837000
[ 171.611358] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
[ 171.618500] Internal error: Oops: 0000000096000044 [#1] SMP
[ 171.624222] Modules linked in: powervr drm_shmem_helper drm_gpuvm...
[ 171.656580] CPU: 0 UID: 0 PID: 549 Comm: bash Not tainted 7.0.0-rc2-g730b257ba723-dirty #13 PREEMPT
[ 171.665773] Hardware name: BeagleBoard.org BeaglePlay (DT)
[ 171.671296] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 171.678306] pc : pvr_fw_trace_mask_set+0x78/0x154 [powervr]
[ 171.683959] lr : pvr_fw_trace_mask_set+0x4c/0x154 [powervr]
[ 171.689593] sp : ffff8000835ebb90
[ 171.692929] x29: ffff8000835ebc00 x28: ffff000005c60f80 x27: 0000000000000000
[ 171.700130] x26: 0000000000000000 x25: ffff00000504af28 x24: 0000000000000000
[ 171.707324] x23: ffff00000504af50 x22: 0000000000000203 x21: 0000000000000000
[ 171.714518] x20: ffff000005c44a80 x19: ffff000005c457b8 x18: 0000000000000000
[ 171.721715] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaaae8887580
[ 171.728908] x14: 0000000000000000 x13: 0000000000000000 x12: ffff8000835ebc30
[ 171.736095] x11: ffff00000504af2a x10: ffff00008504af29 x9 : 0fffffffffffffff
[ 171.743286] x8 : ffff8000835ebbf8 x7 : 0000000000000000 x6 : 000000000000002a
[ 171.750479] x5 : ffff00000504af2e x4 : 0000000000000000 x3 : 0000000000000010
[ 171.757674] x2 : 0000000000000203 x1 : 0000000000000000 x0 : ffff8000835ebba0
[ 171.764871] Call trace:
[ 171.767342] pvr_fw_trace_mask_set+0x78/0x154 [powervr] (P)
[ 171.772984] simple_attr_write_xsigned.isra.0+0xe0/0x19c
[ 171.778341] simple_attr_write+0x18/0x24
[ 171.782296] debugfs_attr_write+0x50/0x98
[ 171.786341] full_proxy_write+0x6c/0xa8
[ 171.790208] vfs_write+0xd4/0x350
[ 171.793561] ksys_write+0x70/0x108
[ 171.796995] __arm64_sys_write+0x1c/0x28
[ 171.800952] invoke_syscall+0x48/0x10c
[ 171.804740] el0_svc_common.constprop.0+0x40/0xe0
[ 171.809487] do_el0_svc+0x1c/0x28
[ 171.812834] el0_svc+0x34/0x108
[ 171.816013] el0t_64_sync_handler+0xa0/0xe4
[ 171.820237] el0t_64_sync+0x198/0x19c
[ 171.823939] Code: 32000262 b90ac293 1a931056 9134e293 (b9000036)
[ 171.830073] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: libwx: use request_irq for VF misc interrupt
Currently, request_threaded_irq() is used with a primary handler but a
NULL threaded handler, while also setting the IRQF_ONESHOT flag. This
specific combination triggers a WARNING since the commit aef30c8d569c
("genirq: Warn about using IRQF_ONESHOT without a threaded handler").
WARNING: kernel/irq/manage.c:1502 at __setup_irq+0x4fa/0x760
Fix the issue by switching to request_irq(), which is the appropriate
interface or a non-threaded interrupt handler, and removing the
unnecessary IRQF_ONESHOT flag. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: avoid recursive nvmet-wq flush in nvmet_ctrl_free
nvmet_tcp_release_queue_work() runs on nvmet-wq and can drop the
final controller reference through nvmet_cq_put(). If that triggers
nvmet_ctrl_free(), the teardown path flushes ctrl->async_event_work on
the same nvmet-wq.
Call chain:
nvmet_tcp_schedule_release_queue()
kref_put(&queue->kref, nvmet_tcp_release_queue)
nvmet_tcp_release_queue()
queue_work(nvmet_wq, &queue->release_work) <--- nvmet_wq
process_one_work()
nvmet_tcp_release_queue_work()
nvmet_cq_put(&queue->nvme_cq)
nvmet_cq_destroy()
nvmet_ctrl_put(cq->ctrl)
nvmet_ctrl_free()
flush_work(&ctrl->async_event_work) <--- nvmet_wq
Previously Scheduled by :-
nvmet_add_async_event
queue_work(nvmet_wq, &ctrl->async_event_work);
This trips lockdep with a possible recursive locking warning.
[ 5223.015876] run blktests nvme/003 at 2026-04-07 20:53:55
[ 5223.061801] loop0: detected capacity change from 0 to 2097152
[ 5223.072206] nvmet: adding nsid 1 to subsystem blktests-subsystem-1
[ 5223.088368] nvmet_tcp: enabling port 0 (127.0.0.1:4420)
[ 5223.126086] nvmet: Created discovery controller 1 for subsystem nqn.2014-08.org.nvmexpress.discovery for NQN nqn.2014-08.org.nvmexpress:uuid:0f01fb42-9f7f-4856-b0b3-51e60b8de349.
[ 5223.128453] nvme nvme1: new ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery", addr 127.0.0.1:4420, hostnqn: nqn.2014-08.org.nvmexpress:uuid:0f01fb42-9f7f-4856-b0b3-51e60b8de349
[ 5233.199447] nvme nvme1: Removing ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery"
[ 5233.227718] ============================================
[ 5233.231283] WARNING: possible recursive locking detected
[ 5233.234696] 7.0.0-rc3nvme+ #20 Tainted: G O N
[ 5233.238434] --------------------------------------------
[ 5233.241852] kworker/u192:6/2413 is trying to acquire lock:
[ 5233.245429] ffff888111632548 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90
[ 5233.251438]
but task is already holding lock:
[ 5233.255254] ffff888111632548 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x5cc/0x6e0
[ 5233.261125]
other info that might help us debug this:
[ 5233.265333] Possible unsafe locking scenario:
[ 5233.269217] CPU0
[ 5233.270795] ----
[ 5233.272436] lock((wq_completion)nvmet-wq);
[ 5233.275241] lock((wq_completion)nvmet-wq);
[ 5233.278020]
*** DEADLOCK ***
[ 5233.281793] May be due to missing lock nesting notation
[ 5233.286195] 3 locks held by kworker/u192:6/2413:
[ 5233.289192] #0: ffff888111632548 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x5cc/0x6e0
[ 5233.294569] #1: ffffc9000e2a7e40 ((work_completion)(&queue->release_work)){+.+.}-{0:0}, at: process_one_work+0x1c5/0x6e0
[ 5233.300128] #2: ffffffff82d7dc40 (rcu_read_lock){....}-{1:3}, at: __flush_work+0x62/0x530
[ 5233.304290]
stack backtrace:
[ 5233.306520] CPU: 4 UID: 0 PID: 2413 Comm: kworker/u192:6 Tainted: G O N 7.0.0-rc3nvme+ #20 PREEMPT(full)
[ 5233.306524] Tainted: [O]=OOT_MODULE, [N]=TEST
[ 5233.306525] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
[ 5233.306527] Workqueue: nvmet-wq nvmet_tcp_release_queue_work [nvmet_tcp]
[ 5233.306532] Call Trace:
[ 5233.306534] <TASK>
[ 5233.306536] dump_stack_lvl+0x73/0xb0
[ 5233.306552] print_deadlock_bug+0x225/0x2f0
[ 5233.306556] __lock_acquire+0x13f0/0x2290
[ 5233.306563] lock_acquire+0xd0/0x300
[ 5233.306565] ? touch_wq_lockdep_map+0x26/0x90
[ 5233.306571] ? __flush_work+0x20b/0x530
[ 5233.306573] ? touch_wq_lockdep_map+0x26/0x90
[ 5233.306577] touch_wq_lockdep_map+0x3b/0x90
[ 5233.306580] ? touch_wq_lockdep_map+0x26/0x90
[ 52
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: fix access to stale wptr mapping
Use drm_exec to take both locks i.e vm root bo and
wptr_obj bo to access the mapping data properly.
This fixes the security issue of unmap the wptr_obj while
a queue creation is in progress and passing other
bo at same address.
(cherry picked from commit 1fc6c8ab45dbee096469c08c13f6099d57a52d6c) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Reject empty multisync extension to prevent infinite loop
v3d_get_extensions() walks a userspace-provided singly-linked list of
ioctl extensions without any bound on the chain length. A local user
can craft a self-referential extension (ext->next == &ext) with zero
in_sync_count and out_sync_count, which bypasses the existing duplicate-
extension guard:
if (se->in_sync_count || se->out_sync_count)
return -EINVAL;
The guard never fires because v3d_get_multisync_post_deps() returns
immediately when count is zero, leaving both fields at zero on every
iteration. The result is an infinite loop in kernel context, blocking
the calling thread and pegging a CPU core indefinitely.
Fix this by rejecting a multisync extension where both in_sync_count
and out_sync_count are zero in v3d_get_multisync_submit_deps(). An
empty multisync carries no synchronization information and serves no
useful purpose, so returning -EINVAL for such an extension is the
correct defense against this attack vector. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: os_dep: avoid NULL pointer dereference in rtw_cbuf_alloc
The return value of kzalloc_flex() is used without
ensuring that the allocation succeeded, and the
pointer is dereferenced unconditionally.
Guard the access to the allocated structure to
avoid a potential NULL pointer dereference if the
allocation fails. |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: mediatek: fix use-after-free in scpsys_get_bus_protection_legacy()
In scpsys_get_bus_protection_legacy(), of_find_node_with_property()
returns a device node with its reference count incremented. The function
then calls of_node_put(node) before checking whether
syscon_regmap_lookup_by_phandle() returns an error. If an error occurs,
dev_err_probe() dereferences the node pointer to print diagnostic
information, but the node memory may have already been freed due to the
earlier of_node_put(), leading to a use-after-free vulnerability.
Fix this by moving the of_node_put() call after the error check, ensuring
the node is still valid when accessed in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: Use kfree_sensitive() to free auth session in tpm_dev_release()
tpm_dev_release() uses plain kfree() to free chip->auth, which contains
sensitive cryptographic material including HMAC session keys, nonces,
and passphrase data (struct tpm2_auth).
Every other code path that frees this structure uses kfree_sensitive()
to zero the memory before releasing it: both tpm2_end_auth_session()
and tpm_buf_check_hmac_response() do so. The tpm_dev_release() path
is the only one that does not, leaving key material in freed slab
memory until it is eventually overwritten.
Use kfree_sensitive() for consistency with the rest of the driver and
to ensure session keys are scrubbed during device teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
media: intel/ipu6: fix error pointer dereference
In a error path isp->psys is confirmed to be an error pointer not NULL so
this condition is true and the error pointer is dereferenced. So isp-psys
should be set to NULL before going to out_ipu6_bus_del_devices.
Detected by Smatch:
drivers/media/pci/intel/ipu6/ipu6.c:690 ipu6_pci_probe() error:
'isp->psys' dereferencing possible ERR_PTR()
[Sakari Ailus: Fix commit message.] |
| In the Linux kernel, the following vulnerability has been resolved:
isofs: validate Rock Ridge CE continuation extent against volume size
rock_continue() reads rs->cont_extent verbatim from the Rock Ridge CE
record and passes it to sb_bread() without checking that the block
number is within the mounted ISO 9660 volume. commit e595447e177b
("[PATCH] rock.c: handle corrupted directories") added cont_offset
and cont_size rejection for the CE continuation but did not validate
the extent block number itself. commit f54e18f1b831 ("isofs: Fix
infinite looping over CE entries") later capped the CE chain length
at RR_MAX_CE_ENTRIES = 32 but again left the block number unchecked.
With a crafted ISO mounted via udisks2 (desktop optical auto-mount)
or via CAP_SYS_ADMIN mount, rs->cont_extent can therefore point at
an out-of-range block or at blocks belonging to an adjacent
filesystem on the same block device. sb_bread() on an out-of-range
block returns NULL cleanly via the block layer EIO path, so there
is no memory-safety violation. For in-range reads of adjacent-
filesystem data, the CE buffer is parsed as Rock Ridge records and
only the text of SL sub-records reaches userspace through
readlink(), which makes the info-leak channel narrow and difficult
to exploit; still, rejecting the malformed CE outright matches the
rejection shape already present in the same function for
cont_offset and cont_size.
Add an ISOFS_SB(sb)->s_nzones bounds check to rock_continue() next
to the existing offset/size rejection, printing the same
corrupted-directory-entry notice. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix early boot crash on parameters without '=' separator
If hugepages, hugepagesz, or default_hugepagesz are specified on the
kernel command line without the '=' separator, early parameter parsing
passes NULL to hugetlb_add_param(), which dereferences it in strlen() and
can crash the system during early boot.
Reject NULL values in hugetlb_add_param() and return -EINVAL instead. |
| In the Linux kernel, the following vulnerability has been resolved:
net: txgbe: fix RTNL assertion warning when remove module
For the copper NIC with external PHY, the driver called
phylink_connect_phy() during probe and phylink_disconnect_phy() during
remove. It caused an RTNL assertion warning in phylink_disconnect_phy()
upon module remove.
To fix this, add rtnl_lock() and rtnl_unlock() around the
phylink_disconnect_phy() in remove function.
------------[ cut here ]------------
RTNL: assertion failed at drivers/net/phy/phylink.c (2351)
WARNING: drivers/net/phy/phylink.c:2351 at
phylink_disconnect_phy+0xd8/0xf0 [phylink], CPU#0: rmmod/4464
Modules linked in: ...
CPU: 0 UID: 0 PID: 4464 Comm: rmmod Kdump: loaded Not tainted 7.0.0-rc4+
Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING
PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024
RIP: 0010:phylink_disconnect_phy+0xe4/0xf0 [phylink]
Code: 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 f6 31 ff e9 3a 38 8f e7
48 8d 3d 48 87 e2 ff ba 2f 09 00 00 48 c7 c6 c1 22 24 c0 <67> 48 0f b9 3a
e9 34 ff ff ff 66 90 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffce7288363ac0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff89654b2a1a00 RCX: 0000000000000000
RDX: 000000000000092f RSI: ffffffffc02422c1 RDI: ffffffffc0239020
RBP: ffffce7288363ae8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8964c4022000
R13: ffff89654fce3028 R14: ffff89654ebb4000 R15: ffffffffc0226348
FS: 0000795e80d93780(0000) GS:ffff896c52857000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005b528b592000 CR3: 0000000170d0f000 CR4: 0000000000f50ef0
PKRU: 55555554
Call Trace:
<TASK>
txgbe_remove_phy+0xbb/0xd0 [txgbe]
txgbe_remove+0x4c/0xb0 [txgbe]
pci_device_remove+0x41/0xb0
device_remove+0x43/0x80
device_release_driver_internal+0x206/0x270
driver_detach+0x4a/0xa0
bus_remove_driver+0x83/0x120
driver_unregister+0x2f/0x60
pci_unregister_driver+0x40/0x90
txgbe_driver_exit+0x10/0x850 [txgbe]
__do_sys_delete_module.isra.0+0x1c3/0x2f0
__x64_sys_delete_module+0x12/0x20
x64_sys_call+0x20c3/0x2390
do_syscall_64+0x11c/0x1500
? srso_alias_return_thunk+0x5/0xfbef5
? do_syscall_64+0x15a/0x1500
? srso_alias_return_thunk+0x5/0xfbef5
? do_fault+0x312/0x580
? srso_alias_return_thunk+0x5/0xfbef5
? __handle_mm_fault+0x9d5/0x1040
? srso_alias_return_thunk+0x5/0xfbef5
? count_memcg_events+0x101/0x1d0
? srso_alias_return_thunk+0x5/0xfbef5
? handle_mm_fault+0x1e8/0x2f0
? srso_alias_return_thunk+0x5/0xfbef5
? do_user_addr_fault+0x2f8/0x820
? srso_alias_return_thunk+0x5/0xfbef5
? irqentry_exit+0xb2/0x600
? srso_alias_return_thunk+0x5/0xfbef5
? exc_page_fault+0x92/0x1c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_uart: fix UAFs and race conditions in close and init paths
Vulnerabilities leading to Use-After-Free (UAF) and Null Pointer
Dereference (NPD) conditions were observed in the lifecycle management
of hci_uart.
The primary issue arises because the workqueues (init_ready and
write_work) are only flushed/cancelled if the HCI_UART_PROTO_READY
flag is set during TTY close. If a hangup occurs before setup completes,
hci_uart_tty_close() skips the teardown of these workqueues and
proceeds to free the `hu` struct. When the scheduled work executes
later, it blindly dereferences the freed `hu` struct.
Furthermore, several data races and UAFs were identified in the teardown
sequence:
1. Calling hci_uart_flush() from hci_uart_close() without effectively
disabling write_work causes a race condition where both can concurrently
double-free hu->tx_skb. This happens because protocol timers can
concurrently invoke hci_uart_tx_wakeup() and requeue write_work.
2. Calling hci_free_dev(hdev) before hu->proto->close(hu) causes a UAF
when vendor specific protocol close callbacks dereference hu->hdev.
3. In the initialization error paths, failing to take the proto_lock
write lock before clearing PROTO_READY leads to races with active
readers. Additionally, hci_uart_tty_receive() accesses hu->hdev
outside the read lock, leading to UAFs if the initialization error
path frees hdev concurrently.
Fix these synchronization and lifecycle issues by:
1. Re-ordering hci_uart_tty_close() to clear HCI_UART_PROTO_READY first,
followed immediately by a cancel_work_sync(&hu->write_work). Clearing
the flag locks out concurrent protocol timers from successfully invoking
hci_uart_tx_wakeup(), effectively rendering the cancellation permanent
and preventing the tx_skb double-free.
2. Note: Clearing PROTO_READY early causes hci_uart_close() to skip
hu->proto->flush(). This is perfectly safe in the tty_close path
because hu->proto->close() executes shortly after, which intrinsically
purges all protocol SKB queues and tears down the state.
3. Relocating hu->proto->close(hu) strictly prior to hci_free_dev(hdev)
across all close and error paths to prevent vendor-level UAFs.
4. Moving the hdev->stat.byte_rx increment in hci_uart_tty_receive()
inside the proto_lock read-side critical section to safely synchronize
with device unregistration.
5. Adding cancel_work_sync(&hu->write_work) to hci_uart_close() to safely
flush the workqueue before hci_uart_flush() is invoked via the HCI core.
6. Utilizing cancel_work_sync() instead of disable_work_sync() across
all paths to prevent permanently breaking user-space retry capabilities. |
| Insufficient validation of untrusted input in DevTools in Google Chrome prior to 149.0.7827.53 allowed a remote attacker who had compromised the renderer process to bypass same origin policy via a crafted HTML page. (Chromium security severity: Medium) |
| Inappropriate implementation in Link Preview in Google Chrome prior to 149.0.7827.53 allowed a remote attacker who had compromised the renderer process to bypass navigation restrictions via a crafted HTML page. (Chromium security severity: Medium) |
| Insufficient policy enforcement in Actor in Google Chrome prior to 149.0.7827.53 allowed a remote attacker to bypass navigation restrictions via a crafted HTML page. (Chromium security severity: Medium) |
| Inappropriate implementation in Extensions in Google Chrome prior to 149.0.7827.53 allowed a remote attacker to leak cross-origin data via a crafted XML file. (Chromium security severity: Medium) |
| Inappropriate implementation in Permissions in Google Chrome prior to 149.0.7827.53 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: Low) |
| Insufficient validation of untrusted input in WebAppInstalls in Google Chrome prior to 149.0.7827.53 allowed a remote attacker who had compromised the renderer process to leak cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |
| Insufficient policy enforcement in Password Manager in Google Chrome prior to 149.0.7827.53 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: Medium) |
