| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: rss: fix indir_table and hkey leak on get_rxfh failure
rss_prepare_get() allocates the indirection table and hash key buffer
via rss_get_data_alloc(), then calls ops->get_rxfh() to populate them.
If get_rxfh() fails, the function returns an error without freeing
the allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: module: call ethnl_ops_complete() on module flash errors
When validate() fails we are skipping over ethnl_ops_complete()
even tho we already called ethnl_ops_begin(). |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: module: avoid leaking a netdev ref on module flash errors
module_flash_fw_schedule() is missing undo for setting
the "in_progress" flag and taking the netdev reference.
Delay taking these, the device can't disappear while
we are holding rtnl_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: cmis: require exact CDB reply length
Malicious SFP module could respond with rpl_len longer than
what cmis_cdb_process_reply() expected, leading to OOB writes.
Malicious HW is a bit theoretical but some modules may just
be buggy and/or the reads may occasionally get corrupted,
so let's protect the kernel.
The existing check protects from short replies. We need to
protect from long ones, too. All callers that pass a non-zero
rpl_exp_len cast the reply payload to a fixed-layout struct
and read fields at fixed offsets, with no version negotiation
or short-reply handling:
- cmis_cdb_validate_password()
- cmis_cdb_module_features_get()
- cmis_fw_update_fw_mng_features_get()
so let's assume that responses longer than expected do not
have to be handled gracefully here. Add a warning message
to make the debug easier in case my understanding is wrong...
Note that page_data->length (argument of kmalloc) comes from
last arg to ethtool_cmis_page_init() which is rpl_exp_len.
Note2 that AIs also like to point out overflows in args->req.payload
itself (which is a fixed-size 120 B buffer, on the stack),
but callers should be reading structs defined by the standard,
so protecting from requests for more data than max seem like
defensive programming. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: cmis: validate start_cmd_payload_size from module
The CMIS firmware update code reads start_cmd_payload_size from
the module's FW Management Features CDB reply and uses it directly
as the byte count for memcpy. The destination buffer is 112 bytes
(ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH - 8). So a malicious
module (or corrupted response) can cause a OOB write later on in
cmis_fw_update_start_download().
Let's error out. If modules that expect longer LPL writes actually
exist we should revisit.
struct cmis_cdb_start_fw_download_pl's definition has to move,
no change there. |
| In the Linux kernel, the following vulnerability has been resolved:
tunnels: load network headers after skb_cow() in iptunnel_pmtud_build_icmp[v6]()
Sashiko found that iptunnel_pmtud_build_icmp() and
iptunnel_pmtud_build_icmpv6() were caching ip_hdr() and ipv6_hdr()
before an skb_cow() call which can reallocate skb->head.
Fix this possible UAF by initializing the local variables
after the skb_cow() call.
Remove skb_reset_network_header() calls which were not needed. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: do not reuse cached ip_hdr() value after skb_tunnel_check_pmtu()
skb_tunnel_check_pmtu() can change skb->head.
Reusing old_iph afer skb_tunnel_check_pmtu() can cause an UAF.
Use instead ip_hdr(skb) as done in drivers/net/bareudp.c
and drivers/net/geneve.c.
Found by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
tunnels: do not assume transport header in iptunnel_pmtud_check_icmp()
In some cases, iptunnel_pmtud_check_icmp() can be called while
skb transport header is not set.
This triggers an out-of-bound access, because
(typeof(skb->transport_header))~0U is 65535.
Access the icmp header based on IPv4 network header,
after making sure icmp->type is present in skb linear part.
Note that iptunnel_pmtud_check_icmpv6()) is fine. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: 6lowpan: check skb_clone() return value in send_mcast_pkt()
The skb_clone() function can return NULL if memory allocation fails.
send_mcast_pkt() calls skb_clone() without checking the return value, which
can lead to a NULL pointer dereference in send_pkt() when it dereferences
skb->data.
Add a NULL check after skb_clone() and skip the peer if the clone fails. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: refuse to enslave CAN devices
syzbot reported a kernel paging request crash in
can_rx_unregister() inside net/can/af_can.c. The crash occurs
because a virtual CAN device (vxcan) is being enslaved to a
bonding master.
During the enslavement process, the bonding driver mutates
and modifies the network device states to fit an Ethernet-like
aggregation model. However, CAN devices operate on a completely
different Layer 2 architecture, relying on the CAN mid-layer
private data structure (can_ml_priv) instead of standard
Ethernet structures. Since bonding does not initialize or
maintain these CAN structures, subsequent operations on the
half-enslaved interface (such as closing associated sockets
via isotp_release) lead to a null-pointer dereference when
accessing the CAN receiver lists.
Bonding CAN interfaces is architecturally invalid as CAN lacks
MAC addresses, ARP capabilities, and standard Ethernet
link-layer mechanisms. While generic loopback devices are
blocked globally in net/core/dev.c, virtual CAN devices
bypass this check because they do not carry the IFF_LOOPBACK
flag, despite acting as local software-loopbacks.
Fix this by explicitly blocking network devices of type
ARPHRD_CAN from being enslaved at the very beginning of
bond_enslave(). This prevents illegal state mutations,
eliminates the resulting KASAN crashes, and avoids potential
memory leaks from incomplete socket cleanups.
As the CAN support has been added a long time after bonding
the Fixes-tag points to the introduction of ARPHRD_CAN that
would have needed a specific handling in bonding_main.c. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: Fix sleep in atomic context in netlink path
Since the introduction of the netlink configuration path for bridge
ports in commit 25c71c75ac87 ("bridge: bridge port parameters over
netlink"), br_setport() was always called with the bridge lock held
around it. Back then this decision made sense: The bridge lock protects
the STP state of the bridge and its ports and at that time the function
only processed three STP related netlink attributes (cost, priority and
state).
Nowadays, br_setport() processes a lot more attributes and most of them
do not need the bridge lock:
* Bridge flags: Only require RTNL. Read locklessly by the data path.
Annotations can be added in net-next.
* FDB port flushing: Only requires the FDB lock.
* Multicast attributes: Only require the multicast lock.
* Group forward mask: Only requires RTNL. Read locklessly by the data
path. Annotations can be added in net-next.
* Backup port and NHID: Only require RTNL. Read locklessly by the data
path.
This is a problem as the bridge calls dev_set_promiscuity() when certain
bridge port flags change and this function can sleep since the commit
cited below, resulting in a splat such as [1].
Fix this by reducing the scope of the bridge lock and only take it when
processing the three STP related attributes that require it. This is
consistent with the multicast attributes where each attribute acquires
the multicast lock instead of having one critical section for all
relevant attributes.
[1]
BUG: sleeping function called from invalid context at net/core/dev_addr_lists.c:1262
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 356, name: bridge
preempt_count: 201, expected: 0
RCU nest depth: 0, expected: 0
2 locks held by bridge/356:
#0: ffffffff919473a0 (rtnl_mutex){+.+.}-{4:4}, at: rtnetlink_rcv_msg (net/core/rtnetlink.c:80 net/core/rtnetlink.c:7002)
#1: ffff888115072d58 (&br->lock){+...}-{3:3}, at: br_setlink (./include/linux/spinlock.h:348 net/bridge/br_netlink.c:1117)
Preemption disabled at:
0x0
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
__might_resched.cold (kernel/sched/core.c:9163)
netif_rx_mode_run (net/core/dev_addr_lists.c:1262)
netif_rx_mode_sync (net/core/dev_addr_lists.c:1428)
dev_set_promiscuity (net/core/dev_api.c:289)
br_manage_promisc (net/bridge/br_if.c:135 net/bridge/br_if.c:172)
br_port_flags_change (net/bridge/br_if.c:242 net/bridge/br_if.c:747)
br_setport (net/bridge/br_netlink.c:1000)
br_setlink (net/bridge/br_netlink.c:1118)
rtnl_bridge_setlink (net/core/rtnetlink.c:5572)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7005)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
netlink_unicast (net/netlink/af_netlink.c:1318 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sock_sendmsg (net/socket.c:787 (discriminator 4) net/socket.c:802 (discriminator 4))
____sys_sendmsg (net/socket.c:2698)
___sys_sendmsg (net/socket.c:2752)
__sys_sendmsg (net/socket.c:2784)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: Fix sleep in atomic context in sysfs path
Since the start of the git history, brport_store() always acquired the
bridge lock. Back then this decision made sense: The bridge lock
protects the STP state of the bridge and its ports and at that time the
function was only used by two STP related attributes (cost and
priority).
Nowadays, brport_store() processes a lot more attributes and most of
them do not need the bridge lock:
* Bridge flags: Only require RTNL. Read locklessly by the data path.
Annotations can be added in net-next.
* FDB port flushing: Only requires the FDB lock.
* Multicast attributes: Only require the multicast lock.
* Group forward mask: Only requires RTNL. Read locklessly by the data
path. Annotations can be added in net-next.
* Backup port: Only requires RTNL. Read locklessly by the data path.
This is a problem as the bridge calls dev_set_promiscuity() when certain
bridge port flags change and this function can sleep since the commit
cited below, resulting in a splat such as [1].
Fix this by reducing the scope of the bridge lock and only take it when
processing the two STP related attributes that require it. Remove the
now stale comment from br_switchdev_set_port_flag(). The
SWITCHDEV_F_DEFER flag can be removed in net-next.
[1]
BUG: sleeping function called from invalid context at net/core/dev_addr_lists.c:1262
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 372, name: bash
preempt_count: 201, expected: 0
RCU nest depth: 0, expected: 0
5 locks held by bash/372:
#0: ffff88810c51c3f0 (sb_writers#7){.+.+}-{0:0}, at: ksys_write (fs/read_write.c:740)
#1: ffff888115ce9480 (&of->mutex){+.+.}-{4:4}, at: kernfs_fop_write_iter (fs/kernfs/file.c:343)
#2: ffff88810b9fd330 (kn->active#37){.+.+}-{0:0}, at: kernfs_fop_write_iter (fs/kernfs/file.c:80 fs/kernfs/file.c:344)
#3: ffffffffa59473a0 (rtnl_mutex){+.+.}-{4:4}, at: brport_store (net/bridge/br_sysfs_if.c:326)
#4: ffff8881099d2d58 (&br->lock){+...}-{3:3}, at: brport_store (./include/linux/spinlock.h:348 net/bridge/br_sysfs_if.c:345)
Preemption disabled at:
0x0
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
__might_resched.cold (kernel/sched/core.c:9163)
netif_rx_mode_run (net/core/dev_addr_lists.c:1262)
netif_rx_mode_sync (net/core/dev_addr_lists.c:1428)
dev_set_promiscuity (net/core/dev_api.c:289)
br_manage_promisc (net/bridge/br_if.c:135 net/bridge/br_if.c:172)
br_port_flags_change (net/bridge/br_if.c:242 net/bridge/br_if.c:747)
store_learning (net/bridge/br_sysfs_if.c:79 net/bridge/br_sysfs_if.c:235)
brport_store (net/bridge/br_sysfs_if.c:346)
kernfs_fop_write_iter (fs/kernfs/file.c:352)
new_sync_write (fs/read_write.c:595)
vfs_write (fs/read_write.c:688)
ksys_write (fs/read_write.c:740)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: coalesce: cap profile updates at NET_DIM_PARAMS_NUM_PROFILES
ethnl_update_profile() walks the ETHTOOL_A_PROFILE_IRQ_MODERATION
nest list with an index 'i' and writes new_profile[i++] without
bounding i. The destination is kmemdup()'d at NET_DIM_PARAMS_NUM_PROFILES
entries (5), but the Netlink nest count is entirely user-controlled.
Netlink policies do not have support for constraining the number
of nested entries (or number of multi-attr entries). |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: tsinfo: don't pass ERR_PTR to genlmsg_cancel on prepare failure
The goto err label leads to:
genlmsg_cancel(skb, ehdr);
return ret;
If ethnl_tsinfo_prepare_dump() failed, it has not started a genlmsg.
There's nothing to cancel, and passing an error pointer to
genlmsg_cancel() would cause a crash. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: eeprom: add more safeties to EEPROM Netlink fallback
The Netlink fallback path for reading module EEPROM
(fallback_set_params()) validates that offset < eeprom_len,
but does not check that offset + length stays within eeprom_len.
The ioctl equivalent (ethtool_get_any_eeprom() in ioctl.c) has
always enforced both bounds:
if (eeprom.offset + eeprom.len > total_len)
return -EINVAL;
This could lead to surprises in both drivers and device FW.
Add the missing offset + length validation to fallback_set_params(),
mirroring the ioctl.
Similarly - ethtool core in general, and ethtool_get_any_eeprom()
in particular tries to zero-init all buffers passed to the drivers
to avoid any extra work of zeroing things out. eeprom_fallback()
uses a plain kmalloc(), change it to zalloc. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: rpl: fix hdrlen overflow in ipv6_rpl_srh_decompress()
ipv6_rpl_srh_decompress() computes:
outhdr->hdrlen = (((n + 1) * sizeof(struct in6_addr)) >> 3);
hdrlen is __u8. For n >= 127 the result exceeds 255 and silently
truncates. With n=127 (cmpri=15, cmpre=15, pad=0, hdrlen=16):
(128 * 16) >> 3 = 256, truncated to 0 as __u8
The caller in ipv6_rpl_srh_rcv() then places the compressed header
at buf + ((ohdr->hdrlen + 1) << 3). With hdrlen=0 this is buf + 8,
but the decompressed region occupies buf[0..2055] (8-byte header
plus 128 full addresses). The compressed header overlaps the
decompressed data, and ipv6_rpl_srh_compress() writes into this
overlap, corrupting the routing header of the forwarded packet.
The existing guard at exthdrs.c:546 checks (n + 1) > 255, which
prevents n+1 from overflowing unsigned char (the segments_left
field), but does not prevent the computed hdrlen from overflowing
__u8. n=127 passes because 128 <= 255, yet hdrlen=256 does not
fit.
Tighten the bound to (n + 1) > 127. This caps n at 126, giving
hdrlen = (127 * 16) >> 3 = 254, which fits in __u8. The compressed
header then lands at buf + ((254 + 1) << 3) = buf + 2040, exactly
past the decompressed region (buf[0..2039]). No overlap. 127
segments is well beyond any realistic RPL deployment. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fix packet loop on netem when duplicate is on
When netem duplicates a packet it re-enqueues the copy at the root qdisc.
If another netem sits in the tree the copy can be duplicated
again, recursing until the stack or memory is exhausted.
The original duplication guard temporarily zeroed q->duplicate around
the re-enqueue, but that does not cover all cases because it is
per-qdisc state shared across all concurrent enqueue paths
and is not safe without additional locking.
Use the skb tc_depth field introduced in an earlier patch:
- increment it on the duplicate before re-enqueue
- skip duplication for any skb whose tc_depth is already non-zero.
This marks the packet itself rather than mutating qdisc state,
therefore it is safe regardless of tree topology or concurrency. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: Fix ethx:ingress -> ethy:egress -> ethx:ingress mirred loop
When mirred redirects to ingress (from either ingress or egress) the loop
state from sched_mirred_dev array dev is lost because of 1) the packet
deferral into the backlog and 2) the fact the sched_mirred_dev array is
cleared. In such cases, if there was a loop we won't discover it.
Here's a simple test to reproduce:
ip a add dev port0 10.10.10.11/24
tc qdisc add dev port0 clsact
tc filter add dev port0 egress protocol ip \
prio 10 matchall action mirred ingress redirect dev port1
tc qdisc add dev port1 clsact
tc filter add dev port1 ingress protocol ip \
prio 10 matchall action mirred egress redirect dev port0
ping -c 1 -W0.01 10.10.10.10 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_mirred: Fix blockcast recursion bypass leading to stack overflow
tcf_mirred_act() checks sched_mirred_nest against MIRRED_NEST_LIMIT (4)
to prevent deep recursion. However, when the action uses blockcast
(tcfm_blockid != 0), the function returns at the tcf_blockcast() call
BEFORE reaching the counter increment. As a result, the recursion
counter never advances and the limit check is entirely bypassed.
When two devices share a TC egress block with a mirred blockcast rule,
a packet egressing on device A is mirrored to device B via blockcast;
device B's egress TC re-enters tcf_mirred_act() via blockcast and
mirrors back to A, creating an unbounded recursion loop:
tcf_mirred_act -> tcf_blockcast -> tcf_mirred_to_dev -> dev_queue_xmit
-> sch_handle_egress -> tcf_classify -> tcf_mirred_act -> (repeat)
This recursion continues until the kernel stack overflows.
The bug is reachable from an unprivileged user via
unshare(CLONE_NEWUSER | CLONE_NEWNET): user namespaces grant
CAP_NET_ADMIN in the new network namespace, which is sufficient to
create dummy devices, attach clsact qdiscs with shared blocks, and
install mirred blockcast filters.
BUG: TASK stack guard page was hit at ffffc90000b7fff8
Oops: stack guard page: 0000 [#1] SMP KASAN NOPTI
CPU: 2 UID: 1000 PID: 169 Comm: poc Not tainted 7.0.0-rc7-next-20260410
RIP: 0010:xas_find+0x17/0x480
Call Trace:
xa_find+0x17b/0x1d0
tcf_mirred_act+0x640/0x1060
tcf_action_exec+0x400/0x530
basic_classify+0x128/0x1d0
tcf_classify+0xd83/0x1150
tc_run+0x328/0x620
__dev_queue_xmit+0x797/0x3100
tcf_mirred_to_dev+0x7b1/0xf70
tcf_mirred_act+0x68a/0x1060
[repeating ~30+ times until stack overflow]
Kernel panic - not syncing: Fatal exception in interrupt
Fix this by incrementing sched_mirred_nest before calling
tcf_blockcast() and decrementing it on return, mirroring the
non-blockcast path. This ensures subsequent recursive entries see the
updated counter and are correctly limited by MIRRED_NEST_LIMIT. |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: Use spin_lock_bh for hn_lock
nvmet_tcp_state_change(), a socket callback that runs in BH context,
can reach handshake_req_cancel() via nvmet_tcp_schedule_release_queue()
and tls_handshake_cancel(). handshake_req_cancel() acquires
hn->hn_lock with plain spin_lock(). If a process-context thread on
the same CPU holds hn->hn_lock when a softirq invokes the cancel path,
the lock attempt deadlocks. This is the only caller that invokes
tls_handshake_cancel() from BH context; every other consumer calls it
from process context.
Deferring the cancel to process context in the NVMe target is not
straightforward: nvmet_tcp_schedule_release_queue() must call
tls_handshake_cancel() atomically with its state transition to
DISCONNECTING. If the cancel were deferred, the handshake completion
callback could fire in the window before the cancel runs, observe the
unexpected state, and return without dropping its kref on the queue.
Reworking that interlock is considerably more invasive than hardening
the handshake lock. Convert all hn->hn_lock acquisitions from
spin_lock/spin_unlock to spin_lock_bh/spin_unlock_bh so the lock is
never taken with softirqs enabled. |
