| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: serialize btintel_hw_error() with hci_req_sync_lock
btintel_hw_error() issues two __hci_cmd_sync() calls (HCI_OP_RESET
and Intel exception-info retrieval) without holding
hci_req_sync_lock(). This lets it race against
hci_dev_do_close() -> btintel_shutdown_combined(), which also runs
__hci_cmd_sync() under the same lock. When both paths manipulate
hdev->req_status/req_rsp concurrently, the close path may free the
response skb first, and the still-running hw_error path hits a
slab-use-after-free in kfree_skb().
Wrap the whole recovery sequence in hci_req_sync_lock/unlock so it
is serialized with every other synchronous HCI command issuer.
Below is the data race report and the kasan report:
BUG: data-race in __hci_cmd_sync_sk / btintel_shutdown_combined
read of hdev->req_rsp at net/bluetooth/hci_sync.c:199
by task kworker/u17:1/83:
__hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200
__hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223
btintel_hw_error+0x114/0x670 drivers/bluetooth/btintel.c:254
hci_error_reset+0x348/0xa30 net/bluetooth/hci_core.c:1030
write/free by task ioctl/22580:
btintel_shutdown_combined+0xd0/0x360
drivers/bluetooth/btintel.c:3648
hci_dev_close_sync+0x9ae/0x2c10 net/bluetooth/hci_sync.c:5246
hci_dev_do_close+0x232/0x460 net/bluetooth/hci_core.c:526
BUG: KASAN: slab-use-after-free in
sk_skb_reason_drop+0x43/0x380 net/core/skbuff.c:1202
Read of size 4 at addr ffff888144a738dc
by task kworker/u17:1/83:
__hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200
__hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223
btintel_hw_error+0x186/0x670 drivers/bluetooth/btintel.c:260 |
| In the Linux kernel, the following vulnerability has been resolved:
team: fix header_ops type confusion with non-Ethernet ports
Similar to commit 950803f72547 ("bonding: fix type confusion in
bond_setup_by_slave()") team has the same class of header_ops type
confusion.
For non-Ethernet ports, team_setup_by_port() copies port_dev->header_ops
directly. When the team device later calls dev_hard_header() or
dev_parse_header(), these callbacks can run with the team net_device
instead of the real lower device, so netdev_priv(dev) is interpreted as
the wrong private type and can crash.
The syzbot report shows a crash in bond_header_create(), but the root
cause is in team: the topology is gre -> bond -> team, and team calls
the inherited header_ops with its own net_device instead of the lower
device, so bond_header_create() receives a team device and interprets
netdev_priv() as bonding private data, causing a type confusion crash.
Fix this by introducing team header_ops wrappers for create/parse,
selecting a team port under RCU, and calling the lower device callbacks
with port->dev, so each callback always sees the correct net_device
context.
Also pass the selected lower device to the lower parse callback, so
recursion is bounded in stacked non-Ethernet topologies and parse
callbacks always run with the correct device context. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix fanout UAF in packet_release() via NETDEV_UP race
`packet_release()` has a race window where `NETDEV_UP` can re-register a
socket into a fanout group's `arr[]` array. The re-registration is not
cleaned up by `fanout_release()`, leaving a dangling pointer in the fanout
array.
`packet_release()` does NOT zero `po->num` in its `bind_lock` section.
After releasing `bind_lock`, `po->num` is still non-zero and `po->ifindex`
still matches the bound device. A concurrent `packet_notifier(NETDEV_UP)`
that already found the socket in `sklist` can re-register the hook.
For fanout sockets, this re-registration calls `__fanout_link(sk, po)`
which adds the socket back into `f->arr[]` and increments `f->num_members`,
but does NOT increment `f->sk_ref`.
The fix sets `po->num` to zero in `packet_release` while `bind_lock` is
held to prevent NETDEV_UP from linking, preventing the race window.
This bug was found following an additional audit with Claude Code based
on CVE-2025-38617. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: Avoid releasing netdev before teardown completes
The patch cited in the Fixes tag below changed the teardown code for
OVS ports to no longer unconditionally take the RTNL. After this change,
the netdev_destroy() callback can proceed immediately to the call_rcu()
invocation if the IFF_OVS_DATAPATH flag is already cleared on the
netdev.
The ovs_netdev_detach_dev() function clears the flag before completing
the unregistration, and if it gets preempted after clearing the flag (as
can happen on an -rt kernel), netdev_destroy() can complete and the
device can be freed before the unregistration completes. This leads to a
splat like:
[ 998.393867] Oops: general protection fault, probably for non-canonical address 0xff00000001000239: 0000 [#1] SMP PTI
[ 998.393877] CPU: 42 UID: 0 PID: 55177 Comm: ip Kdump: loaded Not tainted 6.12.0-211.1.1.el10_2.x86_64+rt #1 PREEMPT_RT
[ 998.393886] Hardware name: Dell Inc. PowerEdge R740/0JMK61, BIOS 2.24.0 03/27/2025
[ 998.393889] RIP: 0010:dev_set_promiscuity+0x8d/0xa0
[ 998.393901] Code: 00 00 75 d8 48 8b 53 08 48 83 ba b0 02 00 00 00 75 ca 48 83 c4 08 5b c3 cc cc cc cc 48 83 bf 48 09 00 00 00 75 91 48 8b 47 08 <48> 83 b8 b0 02 00 00 00 74 97 eb 81 0f 1f 80 00 00 00 00 90 90 90
[ 998.393906] RSP: 0018:ffffce5864a5f6a0 EFLAGS: 00010246
[ 998.393912] RAX: ff00000000ffff89 RBX: ffff894d0adf5a05 RCX: 0000000000000000
[ 998.393917] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: ffff894d0adf5a05
[ 998.393921] RBP: ffff894d19252000 R08: ffff894d19252000 R09: 0000000000000000
[ 998.393924] R10: ffff894d19252000 R11: ffff894d192521b8 R12: 0000000000000006
[ 998.393927] R13: ffffce5864a5f738 R14: 00000000ffffffe2 R15: 0000000000000000
[ 998.393931] FS: 00007fad61971800(0000) GS:ffff894cc0140000(0000) knlGS:0000000000000000
[ 998.393936] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 998.393940] CR2: 000055df0a2a6e40 CR3: 000000011c7fe003 CR4: 00000000007726f0
[ 998.393944] PKRU: 55555554
[ 998.393946] Call Trace:
[ 998.393949] <TASK>
[ 998.393952] ? show_trace_log_lvl+0x1b0/0x2f0
[ 998.393961] ? show_trace_log_lvl+0x1b0/0x2f0
[ 998.393975] ? dp_device_event+0x41/0x80 [openvswitch]
[ 998.394009] ? __die_body.cold+0x8/0x12
[ 998.394016] ? die_addr+0x3c/0x60
[ 998.394027] ? exc_general_protection+0x16d/0x390
[ 998.394042] ? asm_exc_general_protection+0x26/0x30
[ 998.394058] ? dev_set_promiscuity+0x8d/0xa0
[ 998.394066] ? ovs_netdev_detach_dev+0x3a/0x80 [openvswitch]
[ 998.394092] dp_device_event+0x41/0x80 [openvswitch]
[ 998.394102] notifier_call_chain+0x5a/0xd0
[ 998.394106] unregister_netdevice_many_notify+0x51b/0xa60
[ 998.394110] rtnl_dellink+0x169/0x3e0
[ 998.394121] ? rt_mutex_slowlock.constprop.0+0x95/0xd0
[ 998.394125] rtnetlink_rcv_msg+0x142/0x3f0
[ 998.394128] ? avc_has_perm_noaudit+0x69/0xf0
[ 998.394130] ? __pfx_rtnetlink_rcv_msg+0x10/0x10
[ 998.394132] netlink_rcv_skb+0x50/0x100
[ 998.394138] netlink_unicast+0x292/0x3f0
[ 998.394141] netlink_sendmsg+0x21b/0x470
[ 998.394145] ____sys_sendmsg+0x39d/0x3d0
[ 998.394149] ___sys_sendmsg+0x9a/0xe0
[ 998.394156] __sys_sendmsg+0x7a/0xd0
[ 998.394160] do_syscall_64+0x7f/0x170
[ 998.394162] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 998.394165] RIP: 0033:0x7fad61bf4724
[ 998.394188] Code: 89 02 b8 ff ff ff ff eb bb 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 80 3d c5 e9 0c 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89
[ 998.394189] RSP: 002b:00007ffd7e2f7cb8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
[ 998.394191] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fad61bf4724
[ 998.394193] RDX: 0000000000000000 RSI: 00007ffd7e2f7d20 RDI: 0000000000000003
[ 998.394194] RBP: 00007ffd7e2f7d90 R08: 0000000000000010 R09: 000000000000003f
[ 998.394195] R10: 000055df11558010 R11: 0000000000000202 R12: 00007ffd7e2
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: fix circular locking dependency in nci_close_device
nci_close_device() flushes rx_wq and tx_wq while holding req_lock.
This causes a circular locking dependency because nci_rx_work()
running on rx_wq can end up taking req_lock too:
nci_rx_work -> nci_rx_data_packet -> nci_data_exchange_complete
-> __sk_destruct -> rawsock_destruct -> nfc_deactivate_target
-> nci_deactivate_target -> nci_request -> mutex_lock(&ndev->req_lock)
Move the flush of rx_wq after req_lock has been released.
This should safe (I think) because NCI_UP has already been cleared
and the transport is closed, so the work will see it and return
-ENETDOWN.
NIPA has been hitting this running the nci selftest with a debug
kernel on roughly 4% of the runs. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix dangling pointer on mgmt_add_adv_patterns_monitor_complete
This fixes the condition checking so mgmt_pending_valid is executed
whenever status != -ECANCELED otherwise calling mgmt_pending_free(cmd)
would kfree(cmd) without unlinking it from the list first, leaving a
dangling pointer. Any subsequent list traversal (e.g.,
mgmt_pending_foreach during __mgmt_power_off, or another
mgmt_pending_valid call) would dereference freed memory. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Validate PDU length before reading SDU length in l2cap_ecred_data_rcv()
l2cap_ecred_data_rcv() reads the SDU length field from skb->data using
get_unaligned_le16() without first verifying that skb contains at least
L2CAP_SDULEN_SIZE (2) bytes. When skb->len is less than 2, this reads
past the valid data in the skb.
The ERTM reassembly path correctly calls pskb_may_pull() before reading
the SDU length (l2cap_reassemble_sdu, L2CAP_SAR_START case). Apply the
same validation to the Enhanced Credit Based Flow Control data path. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix stack-out-of-bounds read in l2cap_ecred_conn_req
Syzbot reported a KASAN stack-out-of-bounds read in l2cap_build_cmd()
that is triggered by a malformed Enhanced Credit Based Connection Request.
The vulnerability stems from l2cap_ecred_conn_req(). The function allocates
a local stack buffer (`pdu`) designed to hold a maximum of 5 Source Channel
IDs (SCIDs), totaling 18 bytes. When an attacker sends a request with more
than 5 SCIDs, the function calculates `rsp_len` based on this unvalidated
`cmd_len` before checking if the number of SCIDs exceeds
L2CAP_ECRED_MAX_CID.
If the SCID count is too high, the function correctly jumps to the
`response` label to reject the packet, but `rsp_len` retains the
attacker's oversized value. Consequently, l2cap_send_cmd() is instructed
to read past the end of the 18-byte `pdu` buffer, triggering a
KASAN panic.
Fix this by moving the assignment of `rsp_len` to after the `num_scid`
boundary check. If the packet is rejected, `rsp_len` will safely
remain 0, and the error response will only read the 8-byte base header
from the stack. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: prevent policy_hthresh.work from racing with netns teardown
A XFRM_MSG_NEWSPDINFO request can queue the per-net work item
policy_hthresh.work onto the system workqueue.
The queued callback, xfrm_hash_rebuild(), retrieves the enclosing
struct net via container_of(). If the net namespace is torn down
before that work runs, the associated struct net may already have
been freed, and xfrm_hash_rebuild() may then dereference stale memory.
xfrm_policy_fini() already flushes policy_hash_work during teardown,
but it does not synchronize policy_hthresh.work.
Synchronize policy_hthresh.work in xfrm_policy_fini() as well, so the
queued work cannot outlive the net namespace teardown and access a
freed struct net. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix undefined behavior in interpreter sdiv/smod for INT_MIN
The BPF interpreter's signed 32-bit division and modulo handlers use
the kernel abs() macro on s32 operands. The abs() macro documentation
(include/linux/math.h) explicitly states the result is undefined when
the input is the type minimum. When DST contains S32_MIN (0x80000000),
abs((s32)DST) triggers undefined behavior and returns S32_MIN unchanged
on arm64/x86. This value is then sign-extended to u64 as
0xFFFFFFFF80000000, causing do_div() to compute the wrong result.
The verifier's abstract interpretation (scalar32_min_max_sdiv) computes
the mathematically correct result for range tracking, creating a
verifier/interpreter mismatch that can be exploited for out-of-bounds
map value access.
Introduce abs_s32() which handles S32_MIN correctly by casting to u32
before negating, avoiding signed overflow entirely. Replace all 8
abs((s32)...) call sites in the interpreter's sdiv32/smod32 handlers.
s32 is the only affected case -- the s64 division/modulo handlers do
not use abs(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix exception exit lock checking for subprogs
process_bpf_exit_full() passes check_lock = !curframe to
check_resource_leak(), which is false in cases when bpf_throw() is
called from a static subprog. This makes check_resource_leak() to skip
validation of active_rcu_locks, active_preempt_locks, and
active_irq_id on exception exits from subprogs.
At runtime bpf_throw() unwinds the stack via ORC without releasing any
user-acquired locks, which may cause various issues as the result.
Fix by setting check_lock = true for exception exits regardless of
curframe, since exceptions bypass all intermediate frame
cleanup. Update the error message prefix to "bpf_throw" for exception
exits to distinguish them from normal BPF_EXIT.
Fix reject_subprog_with_rcu_read_lock test which was previously
passing for the wrong reason. Test program returned directly from the
subprog call without closing the RCU section, so the error was
triggered by the unclosed RCU lock on normal exit, not by
bpf_throw. Update __msg annotations for affected tests to match the
new "bpf_throw" error prefix.
The spin_lock case is not affected because they are already checked [1]
at the call site in do_check_insn() before bpf_throw can run.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/kernel/bpf/verifier.c?h=v7.0-rc4#n21098 |
| In the Linux kernel, the following vulnerability has been resolved:
driver core: platform: use generic driver_override infrastructure
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1] |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Make sure to use pmu_ctx->pmu for groups
Oliver reported that x86_pmu_del() ended up doing an out-of-bound memory access
when group_sched_in() fails and needs to roll back.
This *should* be handled by the transaction callbacks, but he found that when
the group leader is a software event, the transaction handlers of the wrong PMU
are used. Despite the move_group case in perf_event_open() and group_sched_in()
using pmu_ctx->pmu.
Turns out, inherit uses event->pmu to clone the events, effectively undoing the
move_group case for all inherited contexts. Fix this by also making inherit use
pmu_ctx->pmu, ensuring all inherited counters end up in the same pmu context.
Similarly, __perf_event_read() should use equally use pmu_ctx->pmu for the
group case. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Fix leakage in __construct_region()
Failing the first sysfs_update_group() needs to explicitly
kfree the resource as it is too early for cxl_region_iomem_release()
to do so. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: reject mount if bigalloc with s_first_data_block != 0
bigalloc with s_first_data_block != 0 is not supported, reject mounting
it. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: validate p_idx bounds in ext4_ext_correct_indexes
ext4_ext_correct_indexes() walks up the extent tree correcting
index entries when the first extent in a leaf is modified. Before
accessing path[k].p_idx->ei_block, there is no validation that
p_idx falls within the valid range of index entries for that
level.
If the on-disk extent header contains a corrupted or crafted
eh_entries value, p_idx can point past the end of the allocated
buffer, causing a slab-out-of-bounds read.
Fix this by validating path[k].p_idx against EXT_LAST_INDEX() at
both access sites: before the while loop and inside it. Return
-EFSCORRUPTED if the index pointer is out of range, consistent
with how other bounds violations are handled in the ext4 extent
tree code. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: convert inline data to extents when truncate exceeds inline size
Add a check in ext4_setattr() to convert files from inline data storage
to extent-based storage when truncate() grows the file size beyond the
inline capacity. This prevents the filesystem from entering an
inconsistent state where the inline data flag is set but the file size
exceeds what can be stored inline.
Without this fix, the following sequence causes a kernel BUG_ON():
1. Mount filesystem with inode that has inline flag set and small size
2. truncate(file, 50MB) - grows size but inline flag remains set
3. sendfile() attempts to write data
4. ext4_write_inline_data() hits BUG_ON(write_size > inline_capacity)
The crash occurs because ext4_write_inline_data() expects inline storage
to accommodate the write, but the actual inline capacity (~60 bytes for
i_block + ~96 bytes for xattrs) is far smaller than the file size and
write request.
The fix checks if the new size from setattr exceeds the inode's actual
inline capacity (EXT4_I(inode)->i_inline_size) and converts the file to
extent-based storage before proceeding with the size change.
This addresses the root cause by ensuring the inline data flag and file
size remain consistent during truncate operations. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: prevent immediate PASID reuse case
PASID resue could cause interrupt issue when process
immediately runs into hw state left by previous
process exited with the same PASID, it's possible that
page faults are still pending in the IH ring buffer when
the process exits and frees up its PASID. To prevent the
case, it uses idr cyclic allocator same as kernel pid's.
(cherry picked from commit 8f1de51f49be692de137c8525106e0fce2d1912d) |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: add GFP_NOIO in the bio completion if needed
The bio completion path in the process context (e.g. dm-verity)
will directly call into decompression rather than trigger another
workqueue context for minimal scheduling latencies, which can
then call vm_map_ram() with GFP_KERNEL.
Due to insufficient memory, vm_map_ram() may generate memory
swapping I/O, which can cause submit_bio_wait to deadlock
in some scenarios.
Trimmed down the call stack, as follows:
f2fs_submit_read_io
submit_bio //bio_list is initialized.
mmc_blk_mq_recovery
z_erofs_endio
vm_map_ram
__pte_alloc_kernel
__alloc_pages_direct_reclaim
shrink_folio_list
__swap_writepage
submit_bio_wait //bio_list is non-NULL, hang!!!
Use memalloc_noio_{save,restore}() to wrap up this path. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: magicmouse: avoid memory leak in magicmouse_report_fixup()
The magicmouse_report_fixup() function was returning a
newly kmemdup()-allocated buffer, but never freeing it.
The caller of report_fixup() does not take ownership of the returned
pointer, but it *is* permitted to return a sub-portion of the input
rdesc, whose lifetime is managed by the caller. |
