| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper conditions check in Linux kernel mode driver for some Intel(R) Ethernet Network Controllers and Adapters E810 Series before version 28.3 may allow an authenticated user to potentially enable denial of service via local access. |
| Hydra is a layer-two scalability solution for Cardano. Prior to version 0.22.0, the process assumes L1 event finality and does not consider failed transactions. Currently, Cardano L1 is monitored for certain events which are necessary for state progression. At the moment, Hydra considers those events as finalized as soon as they are recognized by the node participants making such transactions the target of re-org attacks. The system does not currently consider the fact that failed transactions on the Cardano L1 can indeed appear in blocks because these transactions are so infrequent. This issue has been patched in version 0.22.0. |
| OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. In version 4.5.0, using a specially crafted tee-supplicant binary running in REE userspace, an attacker can trigger a panic in a TA that uses the libutee Secure Storage API. Many functions in libutee, specifically those which make up the Secure Storage API, will panic if a system call returns an unexpected return code. This behavior is mandated by the TEE Internal Core API specification. However, in OP-TEE’s implementation, return codes of secure storage operations are passed through unsanitized from the REE tee-supplicant, through the Linux kernel tee-driver, through the OP-TEE kernel, back to libutee. Thus, an attacker with access to REE userspace, and the ability to stop tee-supplicant and replace it with their own process (generally trivial for a root user, and depending on the way permissions are set up, potentially available even to less privileged users) can run a malicious tee-supplicant process that responds to storage requests with unexpected response codes, triggering a panic in the requesting TA. This is particularly dangerous for TAs built with `TA_FLAG_SINGLE_INSTANCE` (corresponding to `gpd.ta.singleInstance` and `TA_FLAG_INSTANCE_KEEP_ALIVE` (corresponding to `gpd.ta.keepAlive`). The behavior of these TAs may depend on memory that is preserved between sessions, and the ability of an attacker to panic the TA and reload it with a clean memory space can compromise the behavior of those TAs. A critical example of this is the optee_ftpm TA. It uses the kept alive memory to hold PCR values, which crucially must be non-resettable. An attacker who can trigger a panic in the fTPM TA can reset the PCRs, and then extend them PCRs with whatever they choose, falsifying boot measurements, accessing sealed data, and potentially more. The impact of this issue depends significantly on the behavior of affected TAs. For some, it could manifest as a denial of service, while for others, like the fTPM TA, it can result in the disclosure of sensitive data. Anyone running the fTPM TA is affected, but similar attacks may be possible on other TAs that leverage the Secure Storage API. A fix is available in commit 941a58d78c99c4754fbd4ec3079ec9e1d596af8f. |
| LNbits is a Lightning wallet and accounts system. Paying invoices in Eclair that do not get settled within the internal timeout (about 30s) lead to a payment being considered failed, even though it may still be in flight. This vulnerability can lead to a total loss of funds for the node backend. This vulnerability is fixed in 0.12.6.
|
| An issue in skteco.com Central Control Attendance Machine web management platform v.3.0 allows an attacker to obtain sensitive information via a crafted script to the csl/user component. |
| An application can be configured to block boot attempts after consecutive tamper resets are detected, which may not occur as expected.
This is possible because the TAMPERRSTCAUSE register may not be properly updated when a level 4 tamper event (a tamper reset) occurs. This impacts Series 2 HSE-SVH devices, including xG23B, xG24B, xG25B, and xG28B, but does not impact xG21B. To mitigate this issue, upgrade to SE Firmware version 2.2.6 or later. |
| Nanopb is a small code-size Protocol Buffers implementation. When the compile time option PB_ENABLE_MALLOC is enabled, the message contains at least one field with FT_POINTER field type, custom stream callback is used with unknown stream length. and the pb_decode_ex() function is used with flag PB_DECODE_DELIMITED, then the pb_decode_ex() function does not automatically call pb_release(), like is done for other failure cases. This could lead to memory leak and potential denial-of-service. This vulnerability is fixed in 0.4.9.1. |
| Team ENVY, a Security Research TEAM has found a flaw that allows for a remote code execution on the NVR. An attacker could inject malformed data into url input parameters to reboot the NVR. The manufacturer has released patch firmware for the flaw, please refer to the manufacturer's report for details and workarounds. |
| OpenPLC_V3 has a vulnerability in the enipThread function that occurs due to the lack of a return value. This leads to a crash when the server loop ends and execution hits an illegal ud2 instruction. This issue can be triggered remotely without authentication by starting the same server multiple times or if the server exits unexpectedly. The vulnerability allows an attacker to cause a Denial of Service (DoS) against the PLC runtime, stopping any PC started remotely without authentication. This results in the PLC process crashing and halting all automation or control logic managed by OpenPLC. |
| VMware vCenter contains a denial-of-service vulnerability. A malicious actor who is authenticated through vCenter and has permission to perform API calls for guest OS customisation may trigger this vulnerability to create a denial-of-service condition. |
| In OpenStack Neutron before 25.0.1, neutron/extensions/tagging.py can use an incorrect ID during policy enforcement. It does not apply the proper policy check for changing network tags. An unprivileged tenant is able to change (add and clear) tags on network objects that do not belong to the tenant, and this action is not subjected to the proper policy authorization check. This affects 23 before 23.2.1, 24 before 24.0.2, and 25 before 25.0.1. |
| Tonic is a native gRPC client & server implementation with async/await support. When using tonic::transport::Server there is a remote DoS attack that can cause the server to exit cleanly on accepting a TCP/TLS stream. This can be triggered by causing the accept call to error out with errors that were not covered correctly causing the accept loop to exit. Upgrading to tonic 0.12.3 and above contains the fix. |
| Oxford Nanopore Technologies' MinKNOW software at or prior to version 24.11 creates a temporary file to store the local authentication token during startup, before copying it to its final location. This temporary file is created in a directory accessible to all users on the system. An unauthorized local user or process can exploit this behavior by placing a file lock on the temporary token file using the flock system call. This prevents MinKNOW from completing the token generation process. As a result, no valid local token is created, and the software is unable to execute commands on the sequencer. This leads to a denial-of-service (DoS) condition, blocking sequencing operations. |
| Solady is software that provides Solidity snippets with APIs. Starting in version 0.0.125 and prior to version 0.1.24, when an account is deployed via a proxy, using regular Solidity to call its initialization function may result in a silent failure, if the initialization function does not return a `bool` or some other return data. This is because regular Solidity uses `extcodesize(proxy)` to decide if call succeeds. This is insufficient in the case when the proxy points to an empty implementation. Users should upgrade to Solady v0.1.24 or later to receive a patch. Deploy any affected implementations and their factories on new EVM chains as soon as possible. |
| An issue was discovered on Mercusys MW325R EU V3 MW325R(EU)_V3_1.11.0 221019 devices. A WAN attacker can make the admin interface unreachable/invisible via an unauthenticated HTTP request. Verification of the data sent by the user does not occur. The web server does not crash, but the admin interface becomes invisible, because the files necessary to display the content are no longer available. A reboot of the router is typically required to restore the correct behavior. |
| Wapro ERP Desktop is vulnerable to MS SQL protocol downgrade request from a server side, what could lead to an unencrypted communication vulnerable to data interception and modification. This issue affects Wapro ERP Desktop versions before 9.00.0. |
| Improper handling of alternate encoding occurs when Elastic Defend on Windows systems attempts to scan a file or process encoded as a multibyte character. This leads to an uncaught exception causing Elastic Defend to crash which in turn will prevent it from quarantining the file and/or killing the process. |
| Nullsoft Scriptable Install System (NSIS) before 3.11 on Windows allows local users to escalate privileges to SYSTEM during an installation, because the temporary plugins directory is created under %WINDIR%\temp and unprivileged users can place a crafted executable file by winning a race condition. This occurs because EW_CREATEDIR does not always set the CreateRestrictedDirectory error flag. |
| NeuVector stores user passwords and API keys using a simple, unsalted hash. This method is vulnerable to rainbow table attack (offline attack where hashes of known passwords are precomputed). |
| golang-jwt is a Go implementation of JSON Web Tokens. Unclear documentation of the error behavior in `ParseWithClaims` can lead to situation where users are potentially not checking errors in the way they should be. Especially, if a token is both expired and invalid, the errors returned by `ParseWithClaims` return both error codes. If users only check for the `jwt.ErrTokenExpired ` using `error.Is`, they will ignore the embedded `jwt.ErrTokenSignatureInvalid` and thus potentially accept invalid tokens. A fix has been back-ported with the error handling logic from the `v5` branch to the `v4` branch. In this logic, the `ParseWithClaims` function will immediately return in "dangerous" situations (e.g., an invalid signature), limiting the combined errors only to situations where the signature is valid, but further validation failed (e.g., if the signature is valid, but is expired AND has the wrong audience). This fix is part of the 4.5.1 release. We are aware that this changes the behaviour of an established function and is not 100 % backwards compatible, so updating to 4.5.1 might break your code. In case you cannot update to 4.5.0, please make sure that you are properly checking for all errors ("dangerous" ones first), so that you are not running in the case detailed above. |
