| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
atm: lec: fix use-after-free in sock_def_readable()
A race condition exists between lec_atm_close() setting priv->lecd
to NULL and concurrent access to priv->lecd in send_to_lecd(),
lec_handle_bridge(), and lec_atm_send(). When the socket is freed
via RCU while another thread is still using it, a use-after-free
occurs in sock_def_readable() when accessing the socket's wait queue.
The root cause is that lec_atm_close() clears priv->lecd without
any synchronization, while callers dereference priv->lecd without
any protection against concurrent teardown.
Fix this by converting priv->lecd to an RCU-protected pointer:
- Mark priv->lecd as __rcu in lec.h
- Use rcu_assign_pointer() in lec_atm_close() and lecd_attach()
for safe pointer assignment
- Use rcu_access_pointer() for NULL checks that do not dereference
the pointer in lec_start_xmit(), lec_push(), send_to_lecd() and
lecd_attach()
- Use rcu_read_lock/rcu_dereference/rcu_read_unlock in send_to_lecd(),
lec_handle_bridge() and lec_atm_send() to safely access lecd
- Use rcu_assign_pointer() followed by synchronize_rcu() in
lec_atm_close() to ensure all readers have completed before
proceeding. This is safe since lec_atm_close() is called from
vcc_release() which holds lock_sock(), a sleeping lock.
- Remove the manual sk_receive_queue drain from lec_atm_close()
since vcc_destroy_socket() already drains it after lec_atm_close()
returns.
v2: Switch from spinlock + sock_hold/put approach to RCU to properly
fix the race. The v1 spinlock approach had two issues pointed out
by Eric Dumazet:
1. priv->lecd was still accessed directly after releasing the
lock instead of using a local copy.
2. The spinlock did not prevent packets being queued after
lec_atm_close() drains sk_receive_queue since timer and
workqueue paths bypass netif_stop_queue().
Note: Syzbot patch testing was attempted but the test VM terminated
unexpectedly with "Connection to localhost closed by remote host",
likely due to a QEMU AHCI emulation issue unrelated to this fix.
Compile testing with "make W=1 net/atm/lec.o" passes cleanly. |
| Cross-site Scripting (XSS) allows an attacker to submit specially crafted data to the application which is returned unaltered in the resulting web page. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_net: Fix UAF on dst_ops when IFF_XMIT_DST_RELEASE is cleared and napi_tx is false
A UAF issue occurs when the virtio_net driver is configured with napi_tx=N
and the device's IFF_XMIT_DST_RELEASE flag is cleared
(e.g., during the configuration of tc route filter rules).
When IFF_XMIT_DST_RELEASE is removed from the net_device, the network stack
expects the driver to hold the reference to skb->dst until the packet
is fully transmitted and freed. In virtio_net with napi_tx=N,
skbs may remain in the virtio transmit ring for an extended period.
If the network namespace is destroyed while these skbs are still pending,
the corresponding dst_ops structure has freed. When a subsequent packet
is transmitted, free_old_xmit() is triggered to clean up old skbs.
It then calls dst_release() on the skb associated with the stale dst_entry.
Since the dst_ops (referenced by the dst_entry) has already been freed,
a UAF kernel paging request occurs.
fix it by adds skb_dst_drop(skb) in start_xmit to explicitly release
the dst reference before the skb is queued in virtio_net.
Call Trace:
Unable to handle kernel paging request at virtual address ffff80007e150000
CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT
...
percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P)
dst_release+0xe0/0x110 net/core/dst.c:177
skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177
sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255
dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469
napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527
__free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net]
free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net]
start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net]
...
Reproduction Steps:
NETDEV="enp3s0"
config_qdisc_route_filter() {
tc qdisc del dev $NETDEV root
tc qdisc add dev $NETDEV root handle 1: prio
tc filter add dev $NETDEV parent 1:0 \
protocol ip prio 100 route to 100 flowid 1:1
ip route add 192.168.1.100/32 dev $NETDEV realm 100
}
test_ns() {
ip netns add testns
ip link set $NETDEV netns testns
ip netns exec testns ifconfig $NETDEV 10.0.32.46/24
ip netns exec testns ping -c 1 10.0.32.1
ip netns del testns
}
config_qdisc_route_filter
test_ns
sleep 2
test_ns |
| Giflib contains a double-free vulnerability that is the result of a shallow copy in GifMakeSavedImage and incorrect error handling. The conditions needed to trigger this vulnerability are difficult but may be possible. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: clear cloned request bio pointer when last clone bio completes
Stale rq->bio values have been observed to cause double-initialization of
cloned bios in request-based device-mapper targets, leading to
use-after-free and double-free scenarios.
One such case occurs when using dm-multipath on top of a PCIe NVMe
namespace, where cloned request bios are freed during
blk_complete_request(), but rq->bio is left intact. Subsequent clone
teardown then attempts to free the same bios again via
blk_rq_unprep_clone().
The resulting double-free path looks like:
nvme_pci_complete_batch()
nvme_complete_batch()
blk_mq_end_request_batch()
blk_complete_request() // called on a DM clone request
bio_endio() // first free of all clone bios
...
rq->end_io() // end_clone_request()
dm_complete_request(tio->orig)
dm_softirq_done()
dm_done()
dm_end_request()
blk_rq_unprep_clone() // second free of clone bios
Fix this by clearing the clone request's bio pointer when the last cloned
bio completes, ensuring that later teardown paths do not attempt to free
already-released bios. |
| Little CMS (lcms2) through 2.18 has an integer overflow in CubeSize in cmslut.c because the overflow check is performed after the multiplication. |
| A vulnerability in the web-based management interface of Cisco IoT Field Network Director could allow an authenticated, remote attacker with low privileges to retrieve files that they do not have permission to access.
This vulnerability is due to insufficient file access checks. An attacker could exploit this vulnerability by submitting crafted input in the web-based management interface. A successful exploit could allow the attacker to read files that they are not authorized to access. |
| A vulnerability in the web-based management interface of Cisco IoT Field Network Director could allow an authenticated, remote attacker with low privileges to access files and execute commands on a remote router.
This vulnerability is due to insufficient input validation of user-supplied data. An attacker could exploit this vulnerability by submitting crafted input in the web-based management interface. A successful exploit could allow the attacker to create, read, or delete files and execute limited commands in user EXEC mode on a remote router. |
| A vulnerability in the web-based management interface of Cisco IoT Field Network Director could allow an authenticated, remote attacker with low privileges to cause a DoS condition on a remotely managed router.
This vulnerability is due to improper error handling. An attacker could exploit this vulnerability by submitting crafted input to the web-based management interface. A successful exploit could allow the attacker to request unauthorized files from a remote router, causing the router to reload and resulting in a DoS condition. |
| A vulnerability in the web UI of Cisco Unity Connection Web Inbox could allow an unauthenticated, remote attacker to conduct SSRF attacks through an affected device.
This vulnerability is due to improper input validation for specific HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to send arbitrary network requests that are sourced from the affected device. |
| A vulnerability in the web-based management interface of Cisco Unity Connection could allow an authenticated, remote attacker to execute arbitrary code on an affected device.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by submitting a crafted API request. A successful exploit could allow the attacker to execute arbitrary code as root, possibly resulting in the complete compromise of a targeted device. To exploit this vulnerability, the attacker must have valid user credentials on the affected device. |
| A denial of service vulnerability could be triggered by sending specially crafted HTTP requests to server function endpoints, this could lead to server crashes, out-of-memory exceptions or excessive CPU usage; affecting the following packages: react-server-dom-webpack, react-server-dom-parcel, react-server-dom-turbopack (versions 19.0.0 through 19.0.5, 19.1.0 through 19.1.6, and 19.2.0 through 19.2.5). |
| HCL BigFix Service Management (SM) is susceptible to a Root File System Not Mounted as Read-Only. An improperly configured root file system may allow
unintended modifications to critical system components, potentially increasing the risk of system compromise or unauthorized changes. |
| OpenMRS Core is an open source electronic medical record system platform. In versions 2.7.8 and earlier and versions 2.8.0 through 2.8.5, the module upload endpoint at POST `/openmrs/ws/rest/v1/module` is vulnerable to a Zip Slip path traversal attack. During automatic extraction of uploaded .omod archives in `WebModuleUtil.startModule()`, ZIP entries under web/module/ are checked only to see whether the full entry path starts with `..,` and the remaining path is then concatenated into the destination path without normalization or a boundary check. A crafted archive can therefore include entries such as `web/module/../../../../malicious.jsp` and cause files to be written outside the intended module directory.
An authenticated attacker with module upload access can write arbitrary files to locations such as the web application root and achieve remote code execution by uploading a JSP file and then requesting it. The issue is compounded by the fact that the module.allow_web_admin runtime property is enforced in the legacy UI controller but not in the REST API upload path, so deployments relying on that property to block web-based module administration remain exposed through the REST endpoint. This issue has been fixed in versions after 2.7.8 in the 2.7.x line and in version 2.8.6 and later. |
| MiCode FileExplorer contains an authentication bypass vulnerability in the embedded SwiFTP FTP server component that allows network attackers to log in without valid credentials. Attackers can send arbitrary username and password combinations to the PASS command handler, which unconditionally grants access and allows listing, reading, writing, and deleting files exposed by the FTP server. The MiCode/Explorer open source project has reached end-of-life status. |
| Versions of the package spin.js before 3.0.0 are vulnerable to Cross-site Scripting (XSS) via the spin() function that allows a creation of more than 1 alert for each 'target' element. An attacker would need to set an arbitrary key-value pair on Object.prototype through a crafted URL achieving a prototype pollution first, before being able to execute arbitrary JavaScript in the context of the user's browser. |
| A Cross-Site Scripting (XSS) vulnerability was found in PHPGurukal Hospital Management System v4.0 in the /hospital/hms/edit-profile.php page. This flaw allows an authenticated attacker (patient) to inject a malicious script payload into the User Name parameter, which is stored in the application and later rendered in the doctor s interface. |
| OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From versions 3.0.0 to before 3.2.9, 3.3.0 to before 3.3.11, and 3.4.0 to before 3.4.11, there is an integer overflow in ImageChannel::resize that leads to heap OOB write via OpenEXRUtil public API. This issue has been patched in versions 3.2.9, 3.3.11, and 3.4.11. |
| OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From versions 3.0.0 to before 3.2.9, 3.3.0 to before 3.3.11, and 3.4.0 to before 3.4.11, IDManifest::init() reconstructs strings from a prefix-compressed representation. If the previous string is longer than 255 bytes, the next string is expected to begin with a 2-byte prefix length. The code reads stringList[i][0] and stringList[i][1] without checking that the current string has at least two bytes. This issue has been patched in versions 3.2.9, 3.3.11, and 3.4.11. |
| OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From versions 3.0.0 to before 3.2.9, 3.3.0 to before 3.3.11, and 3.4.0 to before 3.4.11, readVariableLengthInteger() decodes a variable-length integer from untrusted EXR input without bounding the shift count. After enough continuation bytes, the code executes a left shift by 70 on a 64-bit value, which is undefined behavior. This issue has been patched in versions 3.2.9, 3.3.11, and 3.4.11. |
