| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OpenSSL before 1.0.0c, when J-PAKE is enabled, does not properly validate the public parameters in the J-PAKE protocol, which allows remote attackers to bypass the need for knowledge of the shared secret, and successfully authenticate, by sending crafted values in each round of the protocol. |
| crypto/bn/bn_nist.c in OpenSSL before 0.9.8h on 32-bit platforms, as used in stunnel and other products, in certain circumstances involving ECDH or ECDHE cipher suites, uses an incorrect modular reduction algorithm in its implementation of the P-256 and P-384 NIST elliptic curves, which allows remote attackers to obtain the private key of a TLS server via multiple handshake attempts. |
| The ephemeral ECDH ciphersuite functionality in OpenSSL 0.9.8 through 0.9.8r and 1.0.x before 1.0.0e does not ensure thread safety during processing of handshake messages from clients, which allows remote attackers to cause a denial of service (daemon crash) via out-of-order messages that violate the TLS protocol. |
| Multiple integer signedness errors in crypto/buffer/buffer.c in OpenSSL 0.9.8v allow remote attackers to conduct buffer overflow attacks, and cause a denial of service (memory corruption) or possibly have unspecified other impact, via crafted DER data, as demonstrated by an X.509 certificate or an RSA public key. NOTE: this vulnerability exists because of an incomplete fix for CVE-2012-2110. |
| The DTLS implementation in OpenSSL before 0.9.8s and 1.x before 1.0.0f performs a MAC check only if certain padding is valid, which makes it easier for remote attackers to recover plaintext via a padding oracle attack. |
| The SSL 3.0 implementation in OpenSSL before 0.9.8s and 1.x before 1.0.0f does not properly initialize data structures for block cipher padding, which might allow remote attackers to obtain sensitive information by decrypting the padding data sent by an SSL peer. |
| crypto/evp/e_aes_cbc_hmac_sha1.c in the AES-NI functionality in the TLS 1.1 and 1.2 implementations in OpenSSL 1.0.1 before 1.0.1d allows remote attackers to cause a denial of service (application crash) via crafted CBC data. |
| The elliptic curve cryptography (ECC) subsystem in OpenSSL 1.0.0d and earlier, when the Elliptic Curve Digital Signature Algorithm (ECDSA) is used for the ECDHE_ECDSA cipher suite, does not properly implement curves over binary fields, which makes it easier for context-dependent attackers to determine private keys via a timing attack and a lattice calculation. |
| The ssl3_get_record function in ssl/s3_pkt.c in OpenSSL 0.9.8f through 0.9.8m allows remote attackers to cause a denial of service (crash) via a malformed record in a TLS connection that triggers a NULL pointer dereference, related to the minor version number. NOTE: some of these details are obtained from third party information. |
| OpenSSL before 0.9.8j, when SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG is enabled, does not prevent modification of the ciphersuite in the session cache, which allows remote attackers to force the use of a disabled cipher via vectors involving sniffing network traffic to discover a session identifier, a different vulnerability than CVE-2010-4180. |
| Multiple race conditions in ssl/t1_lib.c in OpenSSL 0.9.8f through 0.9.8o, 1.0.0, and 1.0.0a, when multi-threading and internal caching are enabled on a TLS server, might allow remote attackers to execute arbitrary code via client data that triggers a heap-based buffer overflow, related to (1) the TLS server name extension and (2) elliptic curve cryptography. |
| The Diffie-Hellman key-exchange implementation in OpenSSL 0.9.8, when FIPS mode is enabled, does not properly validate a public parameter, which makes it easier for man-in-the-middle attackers to obtain the shared secret key by modifying network traffic, a related issue to CVE-2011-1923. |
| OpenSSL before 0.9.8y, 1.0.0 before 1.0.0k, and 1.0.1 before 1.0.1d does not properly perform signature verification for OCSP responses, which allows remote OCSP servers to cause a denial of service (NULL pointer dereference and application crash) via an invalid key. |
| RSA verification recovery in the EVP_PKEY_verify_recover function in OpenSSL 1.x before 1.0.0a, as used by pkeyutl and possibly other applications, returns uninitialized memory upon failure, which might allow context-dependent attackers to bypass intended key requirements or obtain sensitive information via unspecified vectors. NOTE: some of these details are obtained from third party information. |
| The Cryptographic Message Syntax (CMS) implementation in crypto/cms/cms_asn1.c in OpenSSL before 0.9.8o and 1.x before 1.0.0a does not properly handle structures that contain OriginatorInfo, which allows context-dependent attackers to modify invalid memory locations or conduct double-free attacks, and possibly execute arbitrary code, via unspecified vectors. |
| OpenSSL before 0.9.8m does not check for a NULL return value from bn_wexpand function calls in (1) crypto/bn/bn_div.c, (2) crypto/bn/bn_gf2m.c, (3) crypto/ec/ec2_smpl.c, and (4) engines/e_ubsec.c, which has unspecified impact and context-dependent attack vectors. |
| OpenSSL before 0.9.8s and 1.x before 1.0.0f, when RFC 3779 support is enabled, allows remote attackers to cause a denial of service (assertion failure) via an X.509 certificate containing certificate-extension data associated with (1) IP address blocks or (2) Autonomous System (AS) identifiers. |
| The implementation of Cryptographic Message Syntax (CMS) and PKCS #7 in OpenSSL before 0.9.8u and 1.x before 1.0.0h does not properly restrict certain oracle behavior, which makes it easier for context-dependent attackers to decrypt data via a Million Message Attack (MMA) adaptive chosen ciphertext attack. |
| The kssl_keytab_is_available function in ssl/kssl.c in OpenSSL before 0.9.8n, when Kerberos is enabled but Kerberos configuration files cannot be opened, does not check a certain return value, which allows remote attackers to cause a denial of service (NULL pointer dereference and daemon crash) via SSL cipher negotiation, as demonstrated by a chroot installation of Dovecot or stunnel without Kerberos configuration files inside the chroot. |
| Issue summary: Processing some specially crafted ASN.1 object identifiers or
data containing them may be very slow.
Impact summary: Applications that use OBJ_obj2txt() directly, or use any of
the OpenSSL subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message
size limit may experience notable to very long delays when processing those
messages, which may lead to a Denial of Service.
An OBJECT IDENTIFIER is composed of a series of numbers - sub-identifiers -
most of which have no size limit. OBJ_obj2txt() may be used to translate
an ASN.1 OBJECT IDENTIFIER given in DER encoding form (using the OpenSSL
type ASN1_OBJECT) to its canonical numeric text form, which are the
sub-identifiers of the OBJECT IDENTIFIER in decimal form, separated by
periods.
When one of the sub-identifiers in the OBJECT IDENTIFIER is very large
(these are sizes that are seen as absurdly large, taking up tens or hundreds
of KiBs), the translation to a decimal number in text may take a very long
time. The time complexity is O(n^2) with 'n' being the size of the
sub-identifiers in bytes (*).
With OpenSSL 3.0, support to fetch cryptographic algorithms using names /
identifiers in string form was introduced. This includes using OBJECT
IDENTIFIERs in canonical numeric text form as identifiers for fetching
algorithms.
Such OBJECT IDENTIFIERs may be received through the ASN.1 structure
AlgorithmIdentifier, which is commonly used in multiple protocols to specify
what cryptographic algorithm should be used to sign or verify, encrypt or
decrypt, or digest passed data.
Applications that call OBJ_obj2txt() directly with untrusted data are
affected, with any version of OpenSSL. If the use is for the mere purpose
of display, the severity is considered low.
In OpenSSL 3.0 and newer, this affects the subsystems OCSP, PKCS7/SMIME,
CMS, CMP/CRMF or TS. It also impacts anything that processes X.509
certificates, including simple things like verifying its signature.
The impact on TLS is relatively low, because all versions of OpenSSL have a
100KiB limit on the peer's certificate chain. Additionally, this only
impacts clients, or servers that have explicitly enabled client
authentication.
In OpenSSL 1.1.1 and 1.0.2, this only affects displaying diverse objects,
such as X.509 certificates. This is assumed to not happen in such a way
that it would cause a Denial of Service, so these versions are considered
not affected by this issue in such a way that it would be cause for concern,
and the severity is therefore considered low. |
