| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Format Plugins versions 1.1.1 and earlier are affected by an Out-of-bounds Read vulnerability that could lead to memory exposure. An attacker could leverage this vulnerability to disclose sensitive information stored in memory. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| A flaw was found in the Linux kernel’s IP framework for transforming packets (XFRM subsystem). This issue may allow a malicious user with CAP_NET_ADMIN privileges to cause a 4 byte out-of-bounds read of XFRMA_MTIMER_THRESH when parsing netlink attributes, leading to potential leakage of sensitive heap data to userspace. |
| A maliciously crafted SLDDRW file, when parsed in ODXSW_DLL.dll through Autodesk applications, can force an Out-of-Bound Read. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process. |
| A maliciously crafted PRT file, when parsed in opennurbs.dll through Autodesk applications, can force an Out-of-Bound Read. A malicious actor can leverage this vulnerability to cause a crash,read sensitive data, or execute arbitrary code in the context of the current process. |
| A maliciously crafted 3DM file, when parsed in opennurbs.dll through Autodesk applications, can force an Out-of-Bounds Write. A malicious actor can leverage this vulnerability to cause a crash, write sensitive data, or execute arbitrary code in the context of the current process. |
| A maliciously crafted MODEL file, when parsed in libodx.dll through Autodesk applications, can force an Out-of-Bounds Read. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process. |
| A maliciously crafted 3DM file, when parsed in opennurbs.dll through Autodesk applications, can force an Out-of-Bounds Read. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process. |
| A maliciously crafted PSD file, when linked or imported into Autodesk 3ds Max, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process. |
| In the Linux kernel, the following vulnerability has been resolved:
habanalabs/gaudi: fix shift out of bounds
When validating NIC queues, queue offset calculation must be
performed only for NIC queues. |
| Side-channel information leakage in Storage in Google Chrome prior to 141.0.7390.54 allowed a remote attacker to perform arbitrary read/write via a crafted HTML page. (Chromium security severity: Medium) |
| Out of bounds read in Media in Google Chrome prior to 141.0.7390.54 allowed a remote attacker to potentially perform out of bounds memory access via a crafted HTML page. (Chromium security severity: Medium) |
| Out of bounds read in V8 in Google Chrome prior to 142.0.7444.59 allowed a remote attacker to perform an out of bounds memory read via a crafted HTML page. (Chromium security severity: Medium) |
| Out of bounds read in WebXR in Google Chrome prior to 142.0.7444.59 allowed a remote attacker to perform an out of bounds memory read via a crafted HTML page. (Chromium security severity: Medium) |
| A maliciously crafted X_B file, when parsed in pskernel.DLL through Autodesk applications, can force an Out-of-Bound Read. A malicious actor can leverage this vulnerability to cause a crash,read sensitive data, or execute arbitrary code in the context of the current process. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: smm: number of GPRs in the SMRAM image depends on the image format
On 64 bit host, if the guest doesn't have X86_FEATURE_LM, KVM will
access 16 gprs to 32-bit smram image, causing out-ouf-bound ram
access.
On 32 bit host, the rsm_load_state_64/enter_smm_save_state_64
is compiled out, thus access overflow can't happen. |
| In the Linux kernel, the following vulnerability has been resolved:
capabilities: fix undefined behavior in bit shift for CAP_TO_MASK
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in security/commoncap.c:1252:2
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0x7d/0xa5
dump_stack+0x15/0x1b
ubsan_epilogue+0xe/0x4e
__ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
cap_task_prctl+0x561/0x6f0
security_task_prctl+0x5a/0xb0
__x64_sys_prctl+0x61/0x8f0
do_syscall_64+0x58/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: fix reserved memory setup
Currently, RISC-V sets up reserved memory using the "early" copy of the
device tree. As a result, when trying to get a reserved memory region
using of_reserved_mem_lookup(), the pointer to reserved memory regions
is using the early, pre-virtual-memory address which causes a kernel
panic when trying to use the buffer's name:
Unable to handle kernel paging request at virtual address 00000000401c31ac
Oops [#1]
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 6.0.0-rc1-00001-g0d9d6953d834 #1
Hardware name: Microchip PolarFire-SoC Icicle Kit (DT)
epc : string+0x4a/0xea
ra : vsnprintf+0x1e4/0x336
epc : ffffffff80335ea0 ra : ffffffff80338936 sp : ffffffff81203be0
gp : ffffffff812e0a98 tp : ffffffff8120de40 t0 : 0000000000000000
t1 : ffffffff81203e28 t2 : 7265736572203a46 s0 : ffffffff81203c20
s1 : ffffffff81203e28 a0 : ffffffff81203d22 a1 : 0000000000000000
a2 : ffffffff81203d08 a3 : 0000000081203d21 a4 : ffffffffffffffff
a5 : 00000000401c31ac a6 : ffff0a00ffffff04 a7 : ffffffffffffffff
s2 : ffffffff81203d08 s3 : ffffffff81203d00 s4 : 0000000000000008
s5 : ffffffff000000ff s6 : 0000000000ffffff s7 : 00000000ffffff00
s8 : ffffffff80d9821a s9 : ffffffff81203d22 s10: 0000000000000002
s11: ffffffff80d9821c t3 : ffffffff812f3617 t4 : ffffffff812f3617
t5 : ffffffff812f3618 t6 : ffffffff81203d08
status: 0000000200000100 badaddr: 00000000401c31ac cause: 000000000000000d
[<ffffffff80338936>] vsnprintf+0x1e4/0x336
[<ffffffff80055ae2>] vprintk_store+0xf6/0x344
[<ffffffff80055d86>] vprintk_emit+0x56/0x192
[<ffffffff80055ed8>] vprintk_default+0x16/0x1e
[<ffffffff800563d2>] vprintk+0x72/0x80
[<ffffffff806813b2>] _printk+0x36/0x50
[<ffffffff8068af48>] print_reserved_mem+0x1c/0x24
[<ffffffff808057ec>] paging_init+0x528/0x5bc
[<ffffffff808031ae>] setup_arch+0xd0/0x592
[<ffffffff8080070e>] start_kernel+0x82/0x73c
early_init_fdt_scan_reserved_mem() takes no arguments as it operates on
initial_boot_params, which is populated by early_init_dt_verify(). On
RISC-V, early_init_dt_verify() is called twice. Once, directly, in
setup_arch() if CONFIG_BUILTIN_DTB is not enabled and once indirectly,
very early in the boot process, by parse_dtb() when it calls
early_init_dt_scan_nodes().
This first call uses dtb_early_va to set initial_boot_params, which is
not usable later in the boot process when
early_init_fdt_scan_reserved_mem() is called. On arm64 for example, the
corresponding call to early_init_dt_scan_nodes() uses fixmap addresses
and doesn't suffer the same fate.
Move early_init_fdt_scan_reserved_mem() further along the boot sequence,
after the direct call to early_init_dt_verify() in setup_arch() so that
the names use the correct virtual memory addresses. The above supposed
that CONFIG_BUILTIN_DTB was not set, but should work equally in the case
where it is - unflatted_and_copy_device_tree() also updates
initial_boot_params. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/sseu: fix max_subslices array-index-out-of-bounds access
It seems that commit bc3c5e0809ae ("drm/i915/sseu: Don't try to store EU
mask internally in UAPI format") exposed a potential out-of-bounds
access, reported by UBSAN as following on a laptop with a gen 11 i915
card:
UBSAN: array-index-out-of-bounds in drivers/gpu/drm/i915/gt/intel_sseu.c:65:27
index 6 is out of range for type 'u16 [6]'
CPU: 2 PID: 165 Comm: systemd-udevd Not tainted 6.2.0-9-generic #9-Ubuntu
Hardware name: Dell Inc. XPS 13 9300/077Y9N, BIOS 1.11.0 03/22/2022
Call Trace:
<TASK>
show_stack+0x4e/0x61
dump_stack_lvl+0x4a/0x6f
dump_stack+0x10/0x18
ubsan_epilogue+0x9/0x3a
__ubsan_handle_out_of_bounds.cold+0x42/0x47
gen11_compute_sseu_info+0x121/0x130 [i915]
intel_sseu_info_init+0x15d/0x2b0 [i915]
intel_gt_init_mmio+0x23/0x40 [i915]
i915_driver_mmio_probe+0x129/0x400 [i915]
? intel_gt_probe_all+0x91/0x2e0 [i915]
i915_driver_probe+0xe1/0x3f0 [i915]
? drm_privacy_screen_get+0x16d/0x190 [drm]
? acpi_dev_found+0x64/0x80
i915_pci_probe+0xac/0x1b0 [i915]
...
According to the definition of sseu_dev_info, eu_mask->hsw is limited to
a maximum of GEN_MAX_SS_PER_HSW_SLICE (6) sub-slices, but
gen11_sseu_info_init() can potentially set 8 sub-slices, in the
!IS_JSL_EHL(gt->i915) case.
Fix this by reserving up to 8 slots for max_subslices in the eu_mask
struct.
(cherry picked from commit 3cba09a6ac86ea1d456909626eb2685596c07822) |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: Use READ_ONCE_NOCHECK in imprecise unwinding stack mode
When CONFIG_FRAME_POINTER is unset, the stack unwinding function
walk_stackframe randomly reads the stack and then, when KASAN is enabled,
it can lead to the following backtrace:
[ 0.000000] ==================================================================
[ 0.000000] BUG: KASAN: stack-out-of-bounds in walk_stackframe+0xa6/0x11a
[ 0.000000] Read of size 8 at addr ffffffff81807c40 by task swapper/0
[ 0.000000]
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.2.0-12919-g24203e6db61f #43
[ 0.000000] Hardware name: riscv-virtio,qemu (DT)
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff80007ba8>] walk_stackframe+0x0/0x11a
[ 0.000000] [<ffffffff80099ecc>] init_param_lock+0x26/0x2a
[ 0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a
[ 0.000000] [<ffffffff80c49c80>] dump_stack_lvl+0x22/0x36
[ 0.000000] [<ffffffff80c3783e>] print_report+0x198/0x4a8
[ 0.000000] [<ffffffff80099ecc>] init_param_lock+0x26/0x2a
[ 0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a
[ 0.000000] [<ffffffff8015f68a>] kasan_report+0x9a/0xc8
[ 0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a
[ 0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a
[ 0.000000] [<ffffffff8006e99c>] desc_make_final+0x80/0x84
[ 0.000000] [<ffffffff8009a04e>] stack_trace_save+0x88/0xa6
[ 0.000000] [<ffffffff80099fc2>] filter_irq_stacks+0x72/0x76
[ 0.000000] [<ffffffff8006b95e>] devkmsg_read+0x32a/0x32e
[ 0.000000] [<ffffffff8015ec16>] kasan_save_stack+0x28/0x52
[ 0.000000] [<ffffffff8006e998>] desc_make_final+0x7c/0x84
[ 0.000000] [<ffffffff8009a04a>] stack_trace_save+0x84/0xa6
[ 0.000000] [<ffffffff8015ec52>] kasan_set_track+0x12/0x20
[ 0.000000] [<ffffffff8015f22e>] __kasan_slab_alloc+0x58/0x5e
[ 0.000000] [<ffffffff8015e7ea>] __kmem_cache_create+0x21e/0x39a
[ 0.000000] [<ffffffff80e133ac>] create_boot_cache+0x70/0x9c
[ 0.000000] [<ffffffff80e17ab2>] kmem_cache_init+0x6c/0x11e
[ 0.000000] [<ffffffff80e00fd6>] mm_init+0xd8/0xfe
[ 0.000000] [<ffffffff80e011d8>] start_kernel+0x190/0x3ca
[ 0.000000]
[ 0.000000] The buggy address belongs to stack of task swapper/0
[ 0.000000] and is located at offset 0 in frame:
[ 0.000000] stack_trace_save+0x0/0xa6
[ 0.000000]
[ 0.000000] This frame has 1 object:
[ 0.000000] [32, 56) 'c'
[ 0.000000]
[ 0.000000] The buggy address belongs to the physical page:
[ 0.000000] page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x81a07
[ 0.000000] flags: 0x1000(reserved|zone=0)
[ 0.000000] raw: 0000000000001000 ff600003f1e3d150 ff600003f1e3d150 0000000000000000
[ 0.000000] raw: 0000000000000000 0000000000000000 00000001ffffffff
[ 0.000000] page dumped because: kasan: bad access detected
[ 0.000000]
[ 0.000000] Memory state around the buggy address:
[ 0.000000] ffffffff81807b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 0.000000] ffffffff81807b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 0.000000] >ffffffff81807c00: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 f3
[ 0.000000] ^
[ 0.000000] ffffffff81807c80: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
[ 0.000000] ffffffff81807d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 0.000000] ==================================================================
Fix that by using READ_ONCE_NOCHECK when reading the stack in imprecise
mode. |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: fix struct pid leaks in OOB support
syzbot reported struct pid leak [1].
Issue is that queue_oob() calls maybe_add_creds() which potentially
holds a reference on a pid.
But skb->destructor is not set (either directly or by calling
unix_scm_to_skb())
This means that subsequent kfree_skb() or consume_skb() would leak
this reference.
In this fix, I chose to fully support scm even for the OOB message.
[1]
BUG: memory leak
unreferenced object 0xffff8881053e7f80 (size 128):
comm "syz-executor242", pid 5066, jiffies 4294946079 (age 13.220s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff812ae26a>] alloc_pid+0x6a/0x560 kernel/pid.c:180
[<ffffffff812718df>] copy_process+0x169f/0x26c0 kernel/fork.c:2285
[<ffffffff81272b37>] kernel_clone+0xf7/0x610 kernel/fork.c:2684
[<ffffffff812730cc>] __do_sys_clone+0x7c/0xb0 kernel/fork.c:2825
[<ffffffff849ad699>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff849ad699>] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
[<ffffffff84a0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd |
