| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to the use of uninitialized memory during ASN.1 length processing. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: fix 32-bit integer overflow in qrtr_endpoint_post()
qrtr_endpoint_post() validates an incoming packet with
if (!size || len != ALIGN(size, 4) + hdrlen)
goto err;
where size comes from the wire. On 32-bit, size_t is 32 bits and
ALIGN(size, 4) wraps to 0 for size >= 0xfffffffd, so the check
passes and skb_put_data(skb, data + hdrlen, size) writes past the
hdrlen-sized skb and oopses the kernel. 64-bit is unaffected.
This is the 32-bit residual of ad9d24c9429e2 ("net: qrtr: fix OOB
Read in qrtr_endpoint_post"), which fixed only the 64-bit case.
Reject any size that cannot fit the buffer before the ALIGN. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: LAG, Fix off-by-one in single-FDB error rollback
On failure at index i, the reverse cleanup loop in
mlx5_lag_create_single_fdb() starts from i, so the failed index
itself is rolled back. That can operate on uninitialized state or
double-tear-down a rule the add_one path already self-rolled-back.
Start the rollback from i - 1 so only successfully-installed entries
are undone. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: Fix possible use after free
In dma_release_channel(), check chan->device->privatecnt after call
dma_chan_put(). However, dma_chan_put() call dma_device_put() which could
release the last reference of the device if the DMA provider is already
gone and hence free it.
Fixes it by moving dma_chan_put() after the check. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a local attacker to gain elevated privileges due to improper privilege management. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/pt: prevent invalid cursor access for purged BOs
During a page table walk for binding, xe_pt_stage_bind() explicitly
skips initializing the xe_res_cursor for purged BOs, treating them
similarly to NULL VMAs by only setting the cursor size.
However, xe_pt_hugepte_possible() and xe_pt_scan_64K() did not check
if the BO was purged before attempting to walk the cursor using
xe_res_dma() and xe_res_next(). Because the cursor was left
uninitialized for purged BOs, this falls through and triggers
warnings like:
WARNING: drivers/gpu/drm/xe/xe_res_cursor.h:274 at xe_res_next
Fix this by explicitly checking if the BO is purged in both
xe_pt_hugepte_possible() and xe_pt_scan_64K(), returning early just
as we do for NULL VMAs, avoiding the invalid cursor accesses entirely.
As a precaution, also zero-initialize the cursor in xe_pt_stage_bind()
to ensure we don't pass garbage data into the page table walkers
if we ever hit a similar edge case in the future.
(cherry picked from commit 4c7b9c6ece32440e5a435a92076d049450cd2d2e) |
| In the Linux kernel, the following vulnerability has been resolved:
flow_dissector: check device type before reading ETH_ADDRS
__skb_flow_dissect() unconditionally reads 12 bytes from eth_hdr(skb)
when FLOW_DISSECTOR_KEY_ETH_ADDRS is requested. This assumes the skb
has a valid Ethernet header at mac_header, which is not always the case.
The problem can be triggered by:
1. Creating a TUN device in L3 mode (IFF_TUN, hard_header_len=0)
2. Attaching a multiq qdisc with a flower filter matching on eth_src
3. Sending a packet through AF_PACKET
Since TUN in L3 mode has no link-layer header, mac_header points to
the L3 data area. The flow dissector reads 12 bytes of uninitialized
skb memory, which then propagates through fl_set_masked_key() and is
used as a rhashtable lookup key in __fl_lookup(), as reported by KMSAN.
Rejecting the filter in the control path (at tc filter add time) is
not feasible because TC filter blocks can be shared between arbitrary
devices -- a filter installed on an Ethernet device may later classify
packets on a headerless device through a shared block. The device
association is not fixed at filter creation time.
Fix this by gating the memcpy on dev->type == ARPHRD_ETHER, which
ensures only true Ethernet-framed packets have their addresses read.
This is more precise than the previous hard_header_len >= 12 check,
which would incorrectly pass for non-Ethernet link types like IPoIB
(ARPHRD_INFINIBAND, hard_header_len=24) and FDDI (hard_header_len=21)
whose L2 headers are not in Ethernet format. Additionally check
skb_mac_header_was_set() to guard against the pathological case where
mac_header is the unset sentinel (~0U), which would cause eth_hdr() to
return a wild pointer.
For the act_mirred redirect case (Ethernet packet redirected to a
non-Ethernet device sharing a TC block), zeroing the key is the correct
behavior: the packet is now being classified on the target device, where
Ethernet address matching is not semantically meaningful.
Note: on non-Ethernet devices, the zeroed key will match a filter
configured with all-zero MAC addresses. This is an improvement over the
previous behavior where uninitialized memory could randomly match any
filter. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: fsl: fsl_audmix: Validate written enum values
fsl_audmix_put_mix_clk_src() and fsl_audmix_put_out_src()
convert the user-provided enum item with snd_soc_enum_item_to_val()
before checking whether the item is within the enum's item count.
The generic snd_soc_put_enum_double() helper performs that
validation, but these callbacks use the converted value first: the
clock-source path tests it with BIT(), and the output-source path
indexes the prms transition table with it.
Reject out-of-range enum items before converting them. |
| Scriban before 6.6.0 contains an uncontrolled recursion vulnerability in its recursive-descent parser. The parser does not enforce a default expression depth limit (the ExpressionDepthLimit property in ParserOptions defaults to null/disabled), so an attacker who controls template input can supply a deeply nested template (e.g., thousands of nested parentheses or blocks) that exhausts thread stack space and raises a StackOverflowException. Because a StackOverflowException cannot be caught in .NET, this causes immediate, unrecoverable termination of the hosting process, resulting in a denial of service. Applications that process untrusted or user-supplied templates can be exploited remotely without authentication. |
| Scriban versions from 3.0.0 through 7.2.5 contain a denial of service vulnerability in the ScriptRange.Multiply operator that bypasses LoopLimit when the left operand is a lazy sequence. Attackers can supply templates with array multiplication on lazy sequences to execute billions of uncharged iterations, pinning CPU cores and exhausting garbage collection resources even when LoopLimit is set to 1. |
| The Grav API plugin (getgrav/grav-plugin-api) versions >= 1.0.6 and <= 1.0.11 contain a privilege escalation vulnerability. A scoped API key minted on a super-admin account bypasses its declared scope cap on four isSuperAdmin()-gated write endpoints (in GroupsController, AccountsConfigController, PreferencesController, and DashboardWidgetController). These endpoints authorize via a super-admin early-return that never invokes requirePermission()—the sole enforcement point of the scope cap—so a 'read-only'-scoped key (e.g. api.pages.read) can perform super-only write operations, including rewriting group ACL maps to grant super-admin privileges to arbitrary accounts. A leaked or delegated read-only CI/monitoring key can therefore gain full super-admin write capability. Fixed in 1.0.13. |
| The Windows interactive service in OpenVPN 2.4.0 through 2.6.21 and 2.7_alpha1 through 2.7.5 allows local authenticated users to bypass the trusted configuration directory constraint and load arbitrary configuration files via crafted options that bypass whitelist checks |
| A vulnerability was detected in GL.iNet A1300, AX1800, AXT1800, MT2500, MT3000, MT6000, X3000 and XE3000 4.8.x. This issue affects some unknown processing of the file /usr/bin/gl_nas_sys of the component NAS Command Service. The manipulation results in os command injection. The attack may be launched remotely. Upgrading to version 4.9.0 is capable of addressing this issue. It is suggested to upgrade the affected component. The vendor explains: "After our investigation, we have confirmed that the vulnerability described (...) does indeed exist." |
| A vulnerability has been found in Edimax EW-7478APC 1.04. Affected by this issue is the function stainfo of the file /goform/stainfo. The manipulation of the argument interface leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| extract-zip through 2.0.1 containment-checks only the parent directory of each archive entry and never the entry's own final path component, so an archive containing two entries with identical names - a symlink whose target is outside the destination, followed by a regular file - writes through the planted symlink and yields an arbitrary file write outside the destination directory. |
| In Progress ShareFile Storage Zones Controller versions <= 5.12.5 and <= 6.0.2, an authenticated zone administrator can exploit improper validation in the download preparation flow, enabling attacker-controlled files to be written outside the intended preparation directory. This can lead to remote code execution in v5 versions. Remote code execution is not confirmed on v6 versions. |
| The Podlove Podcast Publisher plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the create_link_item function in all versions up to, and including, 4.5.3. This makes it possible for authenticated attackers, with contributor-level access and above, to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). A viable POP chain exists within the plugin itself via Podlove\ImageCache\GenerationGuard, whose __destruct() method invokes wp_delete_file() with an attacker-controlled file path populated through unserialization. |
| The MaxUpload – Big File Uploads – Increase Maximum File Upload Size plugin for WordPress is vulnerable to Arbitrary File Upload in all versions up to, and including, 1.4.0 via the handle_upload function. This is due to a filename-validation mismatch in the handle_upload function where extension and MIME checks are applied to the uploaded chunk's filename but not to the final assembled filename derived from the resumableFilename parameter. This makes it possible for unauthenticated attackers to upload files that may be executable, which makes remote code execution possible. |
| The Real Estate Manager Pro plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 12.8.6. This is due to improper capability handling in the allow_attachment_actions() function, which can treat a target user ID as a media attachment ID during user capability checks. This makes it possible for authenticated attackers, with Subscriber-level access and above, to edit an administrator account and escalate their privileges to Administrator when the targeted user ID matches the ID of an existing media attachment. |
| The Platnosci Online Blue Media (Autopay) plugin for WordPress is vulnerable to Stored Cross-Site Scripting in versions up to, and including, 5.0.0 via the 'bm_woocommerce_css_editor_content' POST parameter. This is due to the Css_Editor::handle_save() method being wired to the WordPress 'init' hook by Settings_Manager::init_once() with no capability check, no nonce verification, and no sanitization on the input — the raw $_POST value is written to the 'woocommerce_bluemedia_settings' option via update_option(), then later echoed directly inside a <style> block on the WooCommerce checkout page by Css_Frontend::print_to_wp_head() with no output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page (the checkout page). |
