| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Podman is a tool for managing OCI containers and pods. From 1.8.1 until 5.8.4, a container image that contains a environment variable with just a key and no value can trick podman into passing that variable from the host into the container. This is made worse by the fact that using an asterisk (*) will cause podman to pass all host variables into the container. So essentially a malicious image can exfiltrate all podman environment variables that are set in the session from where the container is launched. This vulnerability is fixed in 5.8.4 and 6.0.0. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: sg: Resolve soft lockup issue when opening /dev/sgX
The parameter def_reserved_size defines the default buffer size reserved
for each Sg_fd and should be restricted to a range between 0 and 1,048,576
(see https://tldp.org/HOWTO/SCSI-Generic-HOWTO/proc.html). Although the
function sg_proc_write_dressz enforces this limit, it is possible to bypass
it by directly modifying the module parameter as shown below, which then
causes a soft lockup:
echo -1 > /sys/module/sg/parameters/def_reserved_size
exec 4<> /dev/sg0
watchdog: BUG: soft lockup - CPU#5 stuck for 26 seconds! [bash:537]
Modules loaded:
CPU: 5 UID: 0 PID: 537 Command: bash, kernel version 6.19.0-rc3+ #134,
PREEMPT disabled
Hardware: QEMU Standard PC (i440FX + PIIX, 1996), BIOS version
1.16.1-2.fc37 dated 04/01/2014
...
Call Trace:
sg_build_reserve+0x5c/0xa0
sg_add_sfp+0x168/0x270
sg_open+0x16e/0x340
chrdev_open+0xbe/0x230
do_dentry_open+0x175/0x480
vfs_open+0x34/0xf0
do_open+0x265/0x3d0
path_openat+0x110/0x290
do_filp_open+0xc3/0x170
do_sys_openat2+0x71/0xe0
__x64_sys_openat+0x6d/0xa0
do_syscall_64+0x62/0x310
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The fix is to use module_param_cb to validate and reject invalid values
assigned to def_reserved_size. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: remove redundant netdev_lock_ops() from conduit ethtool ops
DSA replaces the conduit (master) device's ethtool_ops with its own
wrappers that aggregate stats from both the conduit and DSA switch
ports. Taking the lock again inside the DSA wrappers causes a deadlock.
Stumbled upon this when booting qemu with fbnic and CONFIG_NET_DSA_LOOP=y
(which looks like some kind of testing device that auto-populates the ports
of eth0). `ethtool -i` is enough to deadlock. This means we have basically zero
coverage for DSA stuff with real ops locked devs.
Remove the redundant netdev_lock_ops()/netdev_unlock_ops() calls from
the DSA conduit ethtool wrappers. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Wrap DCN32 phantom-plane allocation in DC_RUN_WITH_PREEMPTION_ENABLED
[Why]
dcn32_validate_bandwidth() wraps dcn32_internal_validate_bw() with
DC_FP_START()/DC_FP_END(). In x86 non-RT, DC_FP_START takes fpregs_lock(),
which disables local softirqs.
The DML1 path through dcn32_enable_phantom_plane() calls kvzalloc() to
allocate ~335 KiB for dc_plane_state. This triggers the vmalloc path,
which calls BUG_ON(in_interrupt()) because it's invoked within the
FPU-enabled (softirq disabled) region, leading to a kernel crash.
[How]
Wrap the dc_state_create_phantom_plane() call with the
DC_RUN_WITH_PREEMPTION_ENABLED() macro to allow preemption during
this memory allocation.
(cherry picked from commit 885ccbef7b94a8b38f69c4211c679021aa27ad11) |
| A weakness has been identified in 78 xiaozhi-esp32 up to 2.2.6. Affected by this issue is the function ParseMessage of the file main/mcp_server.cc of the component MCP Response Handler. This manipulation causes improper synchronization. Remote exploitation of the attack is possible. The attack's complexity is rated as high. The exploitation is known to be difficult. The exploit has been made available to the public and could be used for attacks. The pull request to fix this issue awaits acceptance. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/fcntl: fix SOFTIRQ-unsafe lock order in fasync signaling
A SOFTIRQ-safe to SOFTIRQ-unsafe lock order deadlock can occur in
send_sigio() and send_sigurg() when a process group receives a signal.
When FASYNC is configured for a process group (PIDTYPE_PGID), both
functions use read_lock(&tasklist_lock) to traverse the task list.
However, they are frequently called from softirq context:
- send_sigio() via input_inject_event -> kill_fasync
- send_sigurg() via tcp_check_urg -> sk_send_sigurg (NET_RX_SOFTIRQ)
The deadlock is caused by the rwlock writer fairness mechanism:
1. CPU 0 (process context) holds read_lock(&tasklist_lock) in do_wait().
2. CPU 1 (process context) attempts write_lock(&tasklist_lock) in
fork() or exit() and spins, which blocks all new readers.
3. CPU 0 is interrupted by a softirq (e.g., TCP URG packet reception).
4. The softirq calls send_sigurg() and attempts to acquire
read_lock(&tasklist_lock), deadlocking because CPU 1 is waiting.
Since PID hashing and do_each_pid_task() traversals are already
RCU-protected, the read_lock on tasklist_lock is no longer strictly
required for safe traversal. Fix this by replacing tasklist_lock with
rcu_read_lock(), aligning the process group signaling path with the
single-PID path. This also mitigates a potential remote denial of
service vector via TCP URG packets.
Lockdep splat:
=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
[...]
Chain exists of:
&dev->event_lock --> &f_owner->lock --> tasklist_lock
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(tasklist_lock);
local_irq_disable();
lock(&dev->event_lock);
lock(&f_owner->lock);
<Interrupt>
lock(&dev->event_lock);
*** DEADLOCK *** |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "drm/xe: Skip exec queue schedule toggle if queue is idle during suspend"
This reverts commit 8533051ce92015e9cc6f75e0d52119b9d91610b6.
The idle-skip optimization bypasses GuC suspend, so the GPU may not
perform the context switch that flushes TLB entries for invalidated
userptr VMAs. In LR/preempt-fence VM mode, this can lead to missed TLB
invalidation and page faults during userptr invalidation tests.
Restore unconditional schedule toggling on suspend so the context-switch
TLB flush is always performed.
This optimization will be reintroduced with a fix that does not skip
suspend in LR/preempt-fence VM mode.
(cherry picked from commit 6a1e7934d9a6cf46aecae00a99c2603d1295e170) |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Take the SRCU lock for page table walks in fault injection and AT emulation
walk_s1() and kvm_walk_nested_s2() expect to be called while holding
kvm->srcu to guard against memslot changes. While this is generally
the case, __kvm_at_s12() and __kvm_find_s1_desc_level() call into the
respective walkers without taking kvm->srcu.
Fix by acquiring kvm->srcu prior to the table walk in both instances. |
| In the Linux kernel, the following vulnerability has been resolved:
timers/migration: Fix livelock in tmigr_handle_remote_up()
tmigr_handle_remote_cpu() skips timer_expire_remote() when cpu ==
smp_processor_id(), assuming the local softirq path already handled this
CPU's timers.
This assumption is wrong because jiffies can advance after the handling of
the CPU's global timers in run_timer_base(BASE_GLOBAL) and before
tmigr_handle_remote() evaluates the expiry times.
As a consequence a timer which expires after the CPU local timer wheel
advanced and becomes expired in the remote handling is ignored and the
callback is never invoked and removed from the timer wheel.
What's worse is that fetch_next_timer_interrupt_remote() keeps reporting it
as expired, and the event is re-queued with expires == now on each
iteration. The goto-again loop spins indefinitely.
Fix this by calling timer_expire_remote() unconditionally. That's minimal
overhead for the common case as __run_timer_base() returns immediately if
there is nothing to expire in the local wheel.
[ tglx: Amend change log and add a comment ] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER
When protocol sets HCI_PROTO_DEFER, hci_conn_request_evt() calls
hci_connect_cfm(conn) without hdev->lock. Generally hci_connect_cfm()
assumes it is held, and if conn is deleted concurrently -> UAF.
Only SCO and ISO set HCI_PROTO_DEFER and only for defer setup listen,
and HCI_EV_CONN_REQUEST is not generated for ISO. In the non-deferred
listening socket code paths, hci_connect_cfm(conn) is called with
hdev->lock held.
Fix by holding the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: l2cap: Add missing chan lock in l2cap_ecred_reconf_rsp
l2cap_ecred_reconf_rsp() calls l2cap_chan_del() without holding
l2cap_chan_lock(). Every other l2cap_chan_del() caller in the file
acquires the lock first. A remote BLE device can send a crafted
L2CAP ECRED reconfiguration response to corrupt the channel list
while another thread is iterating it.
Add l2cap_chan_hold() and l2cap_chan_lock() before l2cap_chan_del(),
and l2cap_chan_unlock() and l2cap_chan_put() after, matching the
pattern used in l2cap_ecred_conn_rsp() and l2cap_conn_del(). |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache policy smq: fix missing locks in invalidating cache blocks
In passthrough mode, the policy invalidate_mapping operation is called
simultaneously from multiple workers, thus it should be protected by a
lock. Otherwise, we might end up with data races on the allocated blocks
counter, or even use-after-free issues with internal data structures
when doing concurrent writes.
Note that the existing FIXME in smq_invalidate_mapping() doesn't affect
passthrough mode since migration tasks don't exist there, but would need
attention if supporting fast device shrinking via suspend/resume without
target reloading.
Reproduce steps:
1. Create a cache device consisting of 1024 cache entries
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 262144 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
2. Populate the cache, and record the number of cached blocks
fio --name=populate --filename=/dev/mapper/cache --rw=randwrite --bs=4k \
--size=64m --direct=1
nr_cached=$(dmsetup status cache | awk '{split($7, a, "/"); print a[1]}')
3. Reload the cache into passthrough mode
dmsetup suspend cache
dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0"
dmsetup resume cache
4. Write to the passthrough cache. By setting multiple jobs with I/O
size equal to the cache block size, cache blocks are invalidated
concurrently from different workers.
fio --filename=/dev/mapper/cache --name=test --rw=randwrite --bs=64k \
--direct=1 --numjobs=2 --randrepeat=0 --size=64m
5. Check if demoted matches cached block count. These numbers should
match but may differ due to the data race.
nr_demoted=$(dmsetup status cache | awk '{print $12}')
echo "$nr_cached, $nr_demoted" |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix VM_BIND UNMAP locking
Wrong argument meant that the objs involved in UNMAP ops were not always
getting locked.
Since _NO_SHARE objs share a common resv with the VM (which is always
locked) this would only show up with non-_NO_SHARE BOs.
Patchwork: https://patchwork.freedesktop.org/patch/713898/ |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: add some missing log locking
Function gfs2_logd() calls the log flushing functions gfs2_ail1_start(),
gfs2_ail1_wait(), and gfs2_ail1_empty() without holding sdp->sd_log_flush_lock,
but these functions require exclusion against concurrent transactions.
To fix that, add a non-locking __gfs2_log_flush() function. Then, in
gfs2_logd(), take sdp->sd_log_flush_lock before calling the above mentioned log
flushing functions and __gfs2_log_flush(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix AMDGPU_INFO_READ_MMR_REG
There were multiple issues in that code.
First of all the order between the reset semaphore and the mm_lock was
wrong (e.g. copy_to_user) was called while holding the lock.
Then we allocated memory while holding the reset semaphore which is also
a pretty big bug and can deadlock.
Then we used down_read_trylock() instead of waiting for the reset to
finish.
(cherry picked from commit 361b6e6b303d4b691f6c5974d3eaab67ca6dd90e) |
| In the Linux kernel, the following vulnerability has been resolved:
net: psp: check for device unregister when creating assoc
psp_assoc_device_get_locked() obtains a psp_dev reference via
psp_dev_get_for_sock() (which uses psp_dev_tryget() under RCU);
it then acquires psd->lock and drops the reference. Before
the lock is taken, psp_dev_unregister() can run to completion:
take psd->lock, clear out state, unlock, drop the registration
reference.
The expectation is that the lock prevents device unregistration,
but much like with netdevs special care has to be taken when
"upgrading" a reference to a locked device. Add the missing
check if device is still alive. psp_dev_is_registered() exists
already but had no callers, which makes me wonder if I either
forgot to add this or lost the check during refactoring... |
| In the Linux kernel, the following vulnerability has been resolved:
perf/amd/ibs: Avoid calling perf_allow_kernel() from the IBS NMI handler
Calling perf_allow_kernel() from the NMI context is unsafe and could be
fatal. Capture the permission at event-initialization time by storing it
in event->hw.flags, and have the NMI handler rely on that cached flag
instead of making the call directly. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: fix ABBA deadlock in iptfs_destroy_state()
iptfs_destroy_state() calls hrtimer_cancel() while holding a spinlock
that the timer callback also acquires, leading to an ABBA deadlock on
SMP systems.
For the output timer (iptfs_timer):
- iptfs_destroy_state() holds x->lock, calls hrtimer_cancel()
- iptfs_delay_timer() callback takes x->lock
For the drop timer (drop_timer):
- iptfs_destroy_state() holds drop_lock, calls hrtimer_cancel()
- iptfs_drop_timer() callback takes drop_lock
Both timers use HRTIMER_MODE_REL_SOFT, so their callbacks run in softirq
context. When hrtimer_cancel() is called for a soft timer that is
currently executing on another CPU, hrtimer_cancel_wait_running() spins
on softirq_expiry_lock -- the same lock held by the softirq running the
callback. If the callback is blocked waiting for the spinlock held by
the caller of hrtimer_cancel(), a circular dependency forms:
CPU 0: holds lock_A -> waits for softirq_expiry_lock
CPU 1: holds softirq_expiry_lock -> waits for lock_A
Fix by calling hrtimer_cancel() before acquiring the respective locks.
hrtimer_cancel() is safe to call without holding any lock and will wait
for any in-progress callback to complete. For the output timer, the
lock is still acquired afterwards to drain the packet queue. For the
drop timer, the lock/unlock pair is removed entirely since it only
existed to serialize with the timer callback, which hrtimer_cancel()
already guarantees.
Found by source code audit. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/memory-failure: fix hugetlb_lock AA deadlock in get_huge_page_for_hwpoison
Two concurrent madvise(MADV_HWPOISON) calls on the same hugetlb page can
trigger a recursive spinlock self-deadlock (AA deadlock) on hugetlb_lock
when racing with a concurrent unmap:
thread#0 thread#1
-------- --------
madvise(folio, MADV_HWPOISON)
-> poisons the folio successfully
madvise(folio, MADV_HWPOISON) unmap(folio)
try_memory_failure_hugetlb
get_huge_page_for_hwpoison
spin_lock_irq(&hugetlb_lock) <- held
__get_huge_page_for_hwpoison
hugetlb_update_hwpoison()
-> MF_HUGETLB_FOLIO_PRE_POISONED
goto out:
folio_put()
refcount: 1 -> 0
free_huge_folio()
spin_lock_irqsave(&hugetlb_lock)
-> AA DEADLOCK!
The out: path in __get_huge_page_for_hwpoison() calls folio_put() to drop
the GUP reference while the hugetlb_lock is still held by the hugetlb.c
wrapper get_huge_page_for_hwpoison(). If concurrent unmap has released
the page table mapping reference, folio_put() drops the folio refcount to
zero, triggering free_huge_folio() which attempts to re-acquire the
non-recursive hugetlb_lock.
Fix this by moving hugetlb_lock acquisition from the hugetlb.c wrapper
into get_huge_page_for_hwpoison(). Place spin_unlock_irq() before the
folio_put() at the out: label so the folio is always released outside the
lock.
[akpm@linux-foundation.org: fix race, rename label per Miaohe] |
| A flaw was found in openshift-gitops-operator-container. The openshift.io/cluster-monitoring label is applied to all namespaces that deploy an ArgoCD CR instance, allowing the namespace to create a rogue PrometheusRule. This issue can have adverse effects on the platform monitoring stack, as the rule is rolled out cluster-wide when the label is applied. |
