| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Suricata is a network IDS, IPS and NSM engine. Prior to versions 8.0.3 and 7.0.14, specially crafted traffic can cause Suricata to consume large amounts of memory while parsing DNP3 traffic. This can lead to the process slowing down and running out of memory, potentially leading to it getting killed by the OOM killer. Versions 8.0.3 or 7.0.14 contain a patch. As a workaround, disable the DNP3 parser in the suricata yaml (disabled by default). |
| Suricata is a network IDS, IPS and NSM engine. While saving a dataset a stack buffer is used to prepare the data. Prior to versions 8.0.3 and 7.0.14, if the data in the dataset is too large, this can result in a stack overflow. Versions 8.0.3 and 7.0.14 contain a patch. As a workaround, do not use rules with datasets `save` nor `state` options. |
| Suricata is a network IDS, IPS and NSM engine. Starting in version 8.0.0 and prior to version 8.0.3, inefficiency in http1 headers parsing can lead to slowdown over multiple packets. Version 8.0.3 patches the issue. No known workarounds are available. |
| Suricata is a network IDS, IPS and NSM engine. Prior to version 8.0.3 and 7.0.14, an unsigned integer overflow can lead to a heap use-after-free condition when generating excessive amounts of alerts for a single packet. Versions 8.0.3 and 7.0.14 contain a patch. As a workaround, do not run untrusted rulesets or run with less than 65536 signatures that can match on the same packet. |
| Issue summary: An invalid or NULL pointer dereference can happen in
an application processing a malformed PKCS#12 file.
Impact summary: An application processing a malformed PKCS#12 file can be
caused to dereference an invalid or NULL pointer on memory read, resulting
in a Denial of Service.
A type confusion vulnerability exists in PKCS#12 parsing code where
an ASN1_TYPE union member is accessed without first validating the type,
causing an invalid pointer read.
The location is constrained to a 1-byte address space, meaning any
attempted pointer manipulation can only target addresses between 0x00 and 0xFF.
This range corresponds to the zero page, which is unmapped on most modern
operating systems and will reliably result in a crash, leading only to a
Denial of Service. Exploiting this issue also requires a user or application
to process a maliciously crafted PKCS#12 file. It is uncommon to accept
untrusted PKCS#12 files in applications as they are usually used to store
private keys which are trusted by definition. For these reasons, the issue
was assessed as Low severity.
The FIPS modules in 3.5, 3.4, 3.3 and 3.0 are not affected by this issue,
as the PKCS12 implementation is outside the OpenSSL FIPS module boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.
OpenSSL 1.0.2 is not affected by this issue. |
| Issue summary: A type confusion vulnerability exists in the signature
verification of signed PKCS#7 data where an ASN1_TYPE union member is
accessed without first validating the type, causing an invalid or NULL
pointer dereference when processing malformed PKCS#7 data.
Impact summary: An application performing signature verification of PKCS#7
data or calling directly the PKCS7_digest_from_attributes() function can be
caused to dereference an invalid or NULL pointer when reading, resulting in
a Denial of Service.
The function PKCS7_digest_from_attributes() accesses the message digest attribute
value without validating its type. When the type is not V_ASN1_OCTET_STRING,
this results in accessing invalid memory through the ASN1_TYPE union, causing
a crash.
Exploiting this vulnerability requires an attacker to provide a malformed
signed PKCS#7 to an application that verifies it. The impact of the
exploit is just a Denial of Service, the PKCS7 API is legacy and applications
should be using the CMS API instead. For these reasons the issue was
assessed as Low severity.
The FIPS modules in 3.5, 3.4, 3.3 and 3.0 are not affected by this issue,
as the PKCS#7 parsing implementation is outside the OpenSSL FIPS module
boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue. |
| SandboxJS is a JavaScript sandboxing library. Versions prior to 0.8.26 have a sandbox escape vulnerability due to `AsyncFunction` not being isolated in `SandboxFunction`. The library attempts to sandbox code execution by replacing the global `Function` constructor with a safe, sandboxed version (`SandboxFunction`). This is handled in `utils.ts` by mapping `Function` to `sandboxFunction` within a map used for lookups. However, before version 0.8.26, the library did not include mappings for `AsyncFunction`, `GeneratorFunction`, and `AsyncGeneratorFunction`. These constructors are not global properties but can be accessed via the `.constructor` property of an instance (e.g., `(async () => {}).constructor`). In `executor.ts`, property access is handled. When code running inside the sandbox accesses `.constructor` on an async function (which the sandbox allows creating), the `executor` retrieves the property value. Since `AsyncFunction` was not in the safe-replacement map, the `executor` returns the actual native host `AsyncFunction` constructor. Constructors for functions in JavaScript (like `Function`, `AsyncFunction`) create functions that execute in the global scope. By obtaining the host `AsyncFunction` constructor, an attacker can create a new async function that executes entirely outside the sandbox context, bypassing all restrictions and gaining full access to the host environment (Remote Code Execution). Version 0.8.26 patches this vulnerability. |
| Kyverno is a policy engine designed for cloud native platform engineering teams. Versions prior to 1.16.3 and 1.15.3 have unbounded memory consumption in Kyverno's policy engine that allows users with policy creation privileges to cause denial of service by crafting policies that exponentially amplify string data through context variables. Versions 1.16.3 and 1.15.3 contain a patch for the vulnerability. |
| OctoPrint provides a web interface for controlling consumer 3D printers. OctoPrint versions up to and including 1.11.5 are affected by a (theoretical) timing attack vulnerability that allows API key extraction over the network. Due to using character based comparison that short-circuits on the first mismatched character during API key validation, rather than a cryptographical method with static runtime regardless of the point of mismatch, an attacker with network based access to an affected OctoPrint could extract API keys valid on the instance by measuring the response times of the denied access responses and guess an API key character by character. The vulnerability is patched in version 1.11.6. The likelihood of this attack actually working is highly dependent on the network's latency, noise and similar parameters. An actual proof of concept was not achieved so far. Still, as always administrators are advised to not expose their OctoPrint instance on hostile networks, especially not on the public Internet. |
| Wasmtime is a runtime for WebAssembly. Starting in version 29.0.0 and prior to version 36.0.5, 40.0.3, and 41.0.1, on x86-64 platforms with AVX, Wasmtime's compilation of the `f64.copysign` WebAssembly instruction with Cranelift may load 8 more bytes than is necessary. When signals-based-traps are disabled this can result in a uncaught segfault due to loading from unmapped guard pages. With guard pages disabled it's possible for out-of-sandbox data to be loaded, but unless there is another bug in Cranelift this data is not visible to WebAssembly guests. Wasmtime 36.0.5, 40.0.3, and 41.0.1 have been released to fix this issue. Users are recommended to upgrade to the patched versions of Wasmtime. Other affected versions are not patched and users should updated to supported major version instead. This bug can be worked around by enabling signals-based-traps. While disabling guard pages can be a quick fix in some situations, it's not recommended to disabled guard pages as it is a key defense-in-depth measure of Wasmtime. |
| Hono is a Web application framework that provides support for any JavaScript runtime. Prior to version 4.11.7, IP Restriction Middleware in Hono is vulnerable to an IP address validation bypass. The `IPV4_REGEX` pattern and `convertIPv4ToBinary` function in `src/utils/ipaddr.ts` do not properly validate that IPv4 octet values are within the valid range of 0-255, allowing attackers to craft malformed IP addresses that bypass IP-based access controls. Version 4.11.7 contains a patch for the issue. |
| Hono is a Web application framework that provides support for any JavaScript runtime. Prior to version 4.11.7, Cache Middleware contains an information disclosure vulnerability caused by improper handling of HTTP cache control directives. The middleware does not respect standard cache control headers such as `Cache-Control: private` or `Cache-Control: no-store`, which may result in private or authenticated responses being cached and subsequently exposed to unauthorized users. Version 4.11.7 has a patch for the issue. |
| pypdf is a free and open-source pure-python PDF library. An attacker who uses an infinite loop vulnerability that is present in versions prior to 6.6.2 can craft a PDF which leads to an infinite loop. This requires accessing the outlines/bookmarks. This has been fixed in pypdf 6.6.2. If projects cannot upgrade yet, consider applying the changes from PR #3610 manually. |
| Squidex is an open source headless content management system and content management hub. Versions of the application up to and including 7.21.0 allow users to define "Webhooks" as actions within the Rules engine. The url parameter in the webhook configuration does not appear to validate or restrict destination IP addresses. It accepts local addresses such as 127.0.0.1 or localhost. When a rule is triggered (Either manual trigger by manually calling the trigger endpoint or by a content update or any other triggers), the backend server executes an HTTP request to the user-supplied URL. Crucially, the server logs the full HTTP response in the rule execution log (lastDump field), which is accessible via the API. Which turns a "Blind" SSRF into a "Full Read" SSRF. As of time of publication, no patched versions are available. |
| gmrtd is a Go library for reading Machine Readable Travel Documents (MRTDs). Prior to version 0.17.2, ReadFile accepts TLVs with lengths that can range up to 4GB, which can cause unconstrained resource consumption in both memory and cpu cycles. ReadFile can consume an extended TLV with lengths well outside what would be available in ICs. It can accept something all the way up to 4GB which would take too many iterations in 256 byte chunks, and would also try to allocate memory that might not be available in constrained environments like phones. Or if an API sends data to ReadFile, the same problem applies. The very small chunked read also locks the goroutine in accepting data for a very large number of iterations. projects using the gmrtd library to read files from NFCs can experience extreme slowdowns or memory consumption. A malicious NFC can just behave like the mock transceiver described above and by just sending dummy bytes as each chunk to be read, can make the receiving thread unresponsive and fill up memory on the host system. Version 0.17.2 patches the issue. |
| Dozzle is a realtime log viewer for docker containers. Prior to version 9.0.3, a flaw in Dozzle’s agent-backed shell endpoints allows a user restricted by label filters (for example, `label=env=dev`) to obtain an interactive root shell in out‑of‑scope containers (for example, `env=prod`) on the same agent host by directly targeting their container IDs. Version 9.0.3 contains a patch for the issue. |
| ConvertXis a self-hosted online file converter. In versions prior to 0.17.0, the `POST /delete` endpoint uses a user-controlled `filename` value to construct a filesystem path and deletes it via `unlink` without sufficient validation. By supplying path traversal sequences (e.g., `../`), an attacker can delete arbitrary files outside the intended uploads directory, limited only by the permissions of the server process. Version 0.17.0 fixes the issue. |
| PyTorch is a Python package that provides tensor computation. Prior to version 2.10.0, a vulnerability in PyTorch's `weights_only` unpickler allows an attacker to craft a malicious checkpoint file (`.pth`) that, when loaded with `torch.load(..., weights_only=True)`, can corrupt memory and potentially lead to arbitrary code execution. Version 2.10.0 fixes the issue. |
| Kargo manages and automates the promotion of software artifacts. Prior to versions 1.8.7, 1.7.7, and 1.6.3, a bug was found with authentication checks on the `GetConfig()` API endpoint. This allowed unauthenticated users to access this endpoint by specifying an `Authorization` header with any non-empty `Bearer` token value, regardless of validity. This vulnerability did allow for exfiltration of configuration data such as endpoints for connected Argo CD clusters. This data could allow an attacker to enumerate cluster URLs and namespaces for use in subsequent attacks. Additionally, the same bug affected the `RefreshResource` endpoint. This endpoint does not lead to any information disclosure, but could be used by an unauthenticated attacker to perform a denial-of-service style attack against the Kargo API. `RefreshResource` sets an annotation on specific Kubernetes resources to trigger reconciliations. If run on a constant loop, this could also slow down legitimate requests to the Kubernetes API server. This problem has been patched in Kargo versiosn 1.8.7, 1.7.7, and 1.6.3. There are no workarounds for this issue. |
| PHPUnit is a testing framework for PHP. A vulnerability has been discovered in versions prior to 12.5.8, 11.5.50, 10.5.62, 9.6.33, and 8.5.52 involving unsafe deserialization of code coverage data in PHPT test execution. The vulnerability exists in the `cleanupForCoverage()` method, which deserializes code coverage files without validation, potentially allowing remote code execution if malicious `.coverage` files are present prior to the execution of the PHPT test. The vulnerability occurs when a `.coverage` file, which should not exist before test execution, is deserialized without the `allowed_classes` parameter restriction. An attacker with local file write access can place a malicious serialized object with a `__wakeup()` method into the file system, leading to arbitrary code execution during test runs with code coverage instrumentation enabled. This vulnerability requires local file write access to the location where PHPUnit stores or expects code coverage files for PHPT tests. This can occur through CI/CD pipeline attacks, the local development environment, and/or compromised dependencies. Rather than just silently sanitizing the input via `['allowed_classes' => false]`, the maintainer has chosen to make the anomalous state explicit by treating pre-existing `.coverage` files for PHPT tests as an error condition. Starting in versions in versions 12.5.8, 11.5.50, 10.5.62, 9.6.33, when a `.coverage` file is detected for a PHPT test prior to execution, PHPUnit will emit a clear error message identifying the anomalous state. Organizations can reduce the effective risk of this vulnerability through proper CI/CD configuration, including ephemeral runners, code review enforcement, branch protection, artifact isolation, and access control. |
