| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: storvsc: Fix scheduling while atomic on PREEMPT_RT
This resolves the follow splat and lock-up when running with PREEMPT_RT
enabled on Hyper-V:
[ 415.140818] BUG: scheduling while atomic: stress-ng-iomix/1048/0x00000002
[ 415.140822] INFO: lockdep is turned off.
[ 415.140823] Modules linked in: intel_rapl_msr intel_rapl_common intel_uncore_frequency_common intel_pmc_core pmt_telemetry pmt_discovery pmt_class intel_pmc_ssram_telemetry intel_vsec ghash_clmulni_intel aesni_intel rapl binfmt_misc nls_ascii nls_cp437 vfat fat snd_pcm hyperv_drm snd_timer drm_client_lib drm_shmem_helper snd sg soundcore drm_kms_helper pcspkr hv_balloon hv_utils evdev joydev drm configfs efi_pstore nfnetlink vsock_loopback vmw_vsock_virtio_transport_common hv_sock vmw_vsock_vmci_transport vsock vmw_vmci efivarfs autofs4 ext4 crc16 mbcache jbd2 sr_mod sd_mod cdrom hv_storvsc serio_raw hid_generic scsi_transport_fc hid_hyperv scsi_mod hid hv_netvsc hyperv_keyboard scsi_common
[ 415.140846] Preemption disabled at:
[ 415.140847] [<ffffffffc0656171>] storvsc_queuecommand+0x2e1/0xbe0 [hv_storvsc]
[ 415.140854] CPU: 8 UID: 0 PID: 1048 Comm: stress-ng-iomix Not tainted 6.19.0-rc7 #30 PREEMPT_{RT,(full)}
[ 415.140856] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 09/04/2024
[ 415.140857] Call Trace:
[ 415.140861] <TASK>
[ 415.140861] ? storvsc_queuecommand+0x2e1/0xbe0 [hv_storvsc]
[ 415.140863] dump_stack_lvl+0x91/0xb0
[ 415.140870] __schedule_bug+0x9c/0xc0
[ 415.140875] __schedule+0xdf6/0x1300
[ 415.140877] ? rtlock_slowlock_locked+0x56c/0x1980
[ 415.140879] ? rcu_is_watching+0x12/0x60
[ 415.140883] schedule_rtlock+0x21/0x40
[ 415.140885] rtlock_slowlock_locked+0x502/0x1980
[ 415.140891] rt_spin_lock+0x89/0x1e0
[ 415.140893] hv_ringbuffer_write+0x87/0x2a0
[ 415.140899] vmbus_sendpacket_mpb_desc+0xb6/0xe0
[ 415.140900] ? rcu_is_watching+0x12/0x60
[ 415.140902] storvsc_queuecommand+0x669/0xbe0 [hv_storvsc]
[ 415.140904] ? HARDIRQ_verbose+0x10/0x10
[ 415.140908] ? __rq_qos_issue+0x28/0x40
[ 415.140911] scsi_queue_rq+0x760/0xd80 [scsi_mod]
[ 415.140926] __blk_mq_issue_directly+0x4a/0xc0
[ 415.140928] blk_mq_issue_direct+0x87/0x2b0
[ 415.140931] blk_mq_dispatch_queue_requests+0x120/0x440
[ 415.140933] blk_mq_flush_plug_list+0x7a/0x1a0
[ 415.140935] __blk_flush_plug+0xf4/0x150
[ 415.140940] __submit_bio+0x2b2/0x5c0
[ 415.140944] ? submit_bio_noacct_nocheck+0x272/0x360
[ 415.140946] submit_bio_noacct_nocheck+0x272/0x360
[ 415.140951] ext4_read_bh_lock+0x3e/0x60 [ext4]
[ 415.140995] ext4_block_write_begin+0x396/0x650 [ext4]
[ 415.141018] ? __pfx_ext4_da_get_block_prep+0x10/0x10 [ext4]
[ 415.141038] ext4_da_write_begin+0x1c4/0x350 [ext4]
[ 415.141060] generic_perform_write+0x14e/0x2c0
[ 415.141065] ext4_buffered_write_iter+0x6b/0x120 [ext4]
[ 415.141083] vfs_write+0x2ca/0x570
[ 415.141087] ksys_write+0x76/0xf0
[ 415.141089] do_syscall_64+0x99/0x1490
[ 415.141093] ? rcu_is_watching+0x12/0x60
[ 415.141095] ? finish_task_switch.isra.0+0xdf/0x3d0
[ 415.141097] ? rcu_is_watching+0x12/0x60
[ 415.141098] ? lock_release+0x1f0/0x2a0
[ 415.141100] ? rcu_is_watching+0x12/0x60
[ 415.141101] ? finish_task_switch.isra.0+0xe4/0x3d0
[ 415.141103] ? rcu_is_watching+0x12/0x60
[ 415.141104] ? __schedule+0xb34/0x1300
[ 415.141106] ? hrtimer_try_to_cancel+0x1d/0x170
[ 415.141109] ? do_nanosleep+0x8b/0x160
[ 415.141111] ? hrtimer_nanosleep+0x89/0x100
[ 415.141114] ? __pfx_hrtimer_wakeup+0x10/0x10
[ 415.141116] ? xfd_validate_state+0x26/0x90
[ 415.141118] ? rcu_is_watching+0x12/0x60
[ 415.141120] ? do_syscall_64+0x1e0/0x1490
[ 415.141121] ? do_syscall_64+0x1e0/0x1490
[ 415.141123] ? rcu_is_watching+0x12/0x60
[ 415.141124] ? do_syscall_64+0x1e0/0x1490
[ 415.141125] ? do_syscall_64+0x1e0/0x1490
[ 415.141127] ? irqentry_exit+0x140/0
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wl1251: validate packet IDs before indexing tx_frames
wl1251_tx_packet_cb() uses the firmware completion ID directly to index
the fixed 16-entry wl->tx_frames[] array. The ID is a raw u8 from the
completion block, and the callback does not currently verify that it
fits the array before dereferencing it.
Reject completion IDs that fall outside wl->tx_frames[] and keep the
existing NULL check in the same guard. This keeps the fix local to the
trust boundary and avoids touching the rest of the completion flow. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: mixer: oss: Add card disconnect checkpoints
ALSA OSS mixer layer calls the kcontrol ops rather individually, and
pending calls might be not always caught at disconnecting the device.
For avoiding the potential UAF scenarios, add sanity checks of the
card disconnection at each entry point of OSS mixer accesses. The
rwsem is taken just before that check, hence the rest context should
be covered by that properly. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: fix circular locking dependency in run_unpack_ex
Syzbot reported a circular locking dependency between wnd->rw_lock
(sbi->used.bitmap) and ni->file.run_lock.
The deadlock scenario:
1. ntfs_extend_mft() takes ni->file.run_lock then wnd->rw_lock.
2. run_unpack_ex() takes wnd->rw_lock then tries to acquire
ni->file.run_lock inside ntfs_refresh_zone().
This creates an AB-BA deadlock.
Fix this by using down_read_trylock() instead of down_read() when
acquiring run_lock in run_unpack_ex(). If the lock is contended,
skip ntfs_refresh_zone() - the MFT zone will be refreshed on the
next MFT operation. This breaks the circular dependency since we
never block waiting for run_lock while holding wnd->rw_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_pipapo_avx2: don't return non-matching entry on expiry
New test case fails unexpectedly when avx2 matching functions are used.
The test first loads a ranomly generated pipapo set
with 'ipv4 . port' key, i.e. nft -f foo.
This works. Then, it reloads the set after a flush:
(echo flush set t s; cat foo) | nft -f -
This is expected to work, because its the same set after all and it was
already loaded once.
But with avx2, this fails: nft reports a clashing element.
The reported clash is of following form:
We successfully re-inserted
a . b
c . d
Then we try to insert a . d
avx2 finds the already existing a . d, which (due to 'flush set') is marked
as invalid in the new generation. It skips the element and moves to next.
Due to incorrect masking, the skip-step finds the next matching
element *only considering the first field*,
i.e. we return the already reinserted "a . b", even though the
last field is different and the entry should not have been matched.
No such error is reported for the generic c implementation (no avx2) or when
the last field has to use the 'nft_pipapo_avx2_lookup_slow' fallback.
Bisection points to
7711f4bb4b36 ("netfilter: nft_set_pipapo: fix range overlap detection")
but that fix merely uncovers this bug.
Before this commit, the wrong element is returned, but erronously
reported as a full, identical duplicate.
The root-cause is too early return in the avx2 match functions.
When we process the last field, we should continue to process data
until the entire input size has been consumed to make sure no stale
bits remain in the map. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/umem: Fix double dma_buf_unpin in failure path
In ib_umem_dmabuf_get_pinned_with_dma_device(), the call to
ib_umem_dmabuf_map_pages() can fail. If this occurs, the dmabuf
is immediately unpinned but the umem_dmabuf->pinned flag is still
set. Then, when ib_umem_release() is called, it calls
ib_umem_dmabuf_revoke() which will call dma_buf_unpin() again.
Fix this by removing the immediate unpin upon failure and just let
the ib_umem_release/revoke path handle it. This also ensures the
proper unmap-unpin unwind ordering if the dmabuf_map_pages call
happened to fail due to dma_resv_wait_timeout (and therefore has
a non-NULL umem_dmabuf->sgt). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: ensure safe access to master conntrack
Holding reference on the expectation is not sufficient, the master
conntrack object can just go away, making exp->master invalid.
To access exp->master safely:
- Grab the nf_conntrack_expect_lock, this gets serialized with
clean_from_lists() which also holds this lock when the master
conntrack goes away.
- Hold reference on master conntrack via nf_conntrack_find_get().
Not so easy since the master tuple to look up for the master conntrack
is not available in the existing problematic paths.
This patch goes for extending the nf_conntrack_expect_lock section
to address this issue for simplicity, in the cases that are described
below this is just slightly extending the lock section.
The add expectation command already holds a reference to the master
conntrack from ctnetlink_create_expect().
However, the delete expectation command needs to grab the spinlock
before looking up for the expectation. Expand the existing spinlock
section to address this to cover the expectation lookup. Note that,
the nf_ct_expect_iterate_net() calls already grabs the spinlock while
iterating over the expectation table, which is correct.
The get expectation command needs to grab the spinlock to ensure master
conntrack does not go away. This also expands the existing spinlock
section to cover the expectation lookup too. I needed to move the
netlink skb allocation out of the spinlock to keep it GFP_KERNEL.
For the expectation events, the IPEXP_DESTROY event is already delivered
under the spinlock, just move the delivery of IPEXP_NEW under the
spinlock too because the master conntrack event cache is reached through
exp->master.
While at it, add lockdep notations to help identify what codepaths need
to grab the spinlock. |
| In the Linux kernel, the following vulnerability has been resolved:
ima: verify the previous kernel's IMA buffer lies in addressable RAM
Patch series "Address page fault in ima_restore_measurement_list()", v3.
When the second-stage kernel is booted via kexec with a limiting command
line such as "mem=<size>" we observe a pafe fault that happens.
BUG: unable to handle page fault for address: ffff97793ff47000
RIP: ima_restore_measurement_list+0xdc/0x45a
#PF: error_code(0x0000) not-present page
This happens on x86_64 only, as this is already fixed in aarch64 in
commit: cbf9c4b9617b ("of: check previous kernel's ima-kexec-buffer
against memory bounds")
This patch (of 3):
When the second-stage kernel is booted with a limiting command line (e.g.
"mem=<size>"), the IMA measurement buffer handed over from the previous
kernel may fall outside the addressable RAM of the new kernel. Accessing
such a buffer can fault during early restore.
Introduce a small generic helper, ima_validate_range(), which verifies
that a physical [start, end] range for the previous-kernel IMA buffer lies
within addressable memory:
- On x86, use pfn_range_is_mapped().
- On OF based architectures, use page_is_ram(). |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Flush dev-IOTLB only when PCIe device is accessible in scalable mode
Commit 4fc82cd907ac ("iommu/vt-d: Don't issue ATS Invalidation
request when device is disconnected") relies on
pci_dev_is_disconnected() to skip ATS invalidation for
safely-removed devices, but it does not cover link-down caused
by faults, which can still hard-lock the system.
For example, if a VM fails to connect to the PCIe device,
"virsh destroy" is executed to release resources and isolate
the fault, but a hard-lockup occurs while releasing the group fd.
Call Trace:
qi_submit_sync
qi_flush_dev_iotlb
intel_pasid_tear_down_entry
device_block_translation
blocking_domain_attach_dev
__iommu_attach_device
__iommu_device_set_domain
__iommu_group_set_domain_internal
iommu_detach_group
vfio_iommu_type1_detach_group
vfio_group_detach_container
vfio_group_fops_release
__fput
Although pci_device_is_present() is slower than
pci_dev_is_disconnected(), it still takes only ~70 µs on a
ConnectX-5 (8 GT/s, x2) and becomes even faster as PCIe speed
and width increase.
Besides, devtlb_invalidation_with_pasid() is called only in the
paths below, which are far less frequent than memory map/unmap.
1. mm-struct release
2. {attach,release}_dev
3. set/remove PASID
4. dirty-tracking setup
The gain in system stability far outweighs the negligible cost
of using pci_device_is_present() instead of pci_dev_is_disconnected()
to decide when to skip ATS invalidation, especially under GDR
high-load conditions. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Fix null pointer dereference issue
If SMU is disabled, during RAS initialization,
there will be null pointer dereference issue here. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix zero size inode with non-zero size after log replay
When logging that an inode exists, as part of logging a new name or
logging new dir entries for a directory, we always set the generation of
the logged inode item to 0. This is to signal during log replay (in
overwrite_item()), that we should not set the i_size since we only logged
that an inode exists, so the i_size of the inode in the subvolume tree
must be preserved (as when we log new names or that an inode exists, we
don't log extents).
This works fine except when we have already logged an inode in full mode
or it's the first time we are logging an inode created in a past
transaction, that inode has a new i_size of 0 and then we log a new name
for the inode (due to a new hardlink or a rename), in which case we log
an i_size of 0 for the inode and a generation of 0, which causes the log
replay code to not update the inode's i_size to 0 (in overwrite_item()).
An example scenario:
mkdir /mnt/dir
xfs_io -f -c "pwrite 0 64K" /mnt/dir/foo
sync
xfs_io -c "truncate 0" -c "fsync" /mnt/dir/foo
ln /mnt/dir/foo /mnt/dir/bar
xfs_io -c "fsync" /mnt/dir
<power fail>
After log replay the file remains with a size of 64K. This is because when
we first log the inode, when we fsync file foo, we log its current i_size
of 0, and then when we create a hard link we log again the inode in exists
mode (LOG_INODE_EXISTS) but we set a generation of 0 for the inode item we
add to the log tree, so during log replay overwrite_item() sees that the
generation is 0 and i_size is 0 so we skip updating the inode's i_size
from 64K to 0.
Fix this by making sure at fill_inode_item() we always log the real
generation of the inode if it was logged in the current transaction with
the i_size we logged before. Also if an inode created in a previous
transaction is logged in exists mode only, make sure we log the i_size
stored in the inode item located from the commit root, so that if we log
multiple times that the inode exists we get the correct i_size.
A test case for fstests will follow soon. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: mpu3050-core: fix pm_runtime error handling
The return value of pm_runtime_get_sync() is not checked, allowing
the driver to access hardware that may fail to resume. The device
usage count is also unconditionally incremented. Use
pm_runtime_resume_and_get() which propagates errors and avoids
incrementing the usage count on failure.
In preenable, add pm_runtime_put_autosuspend() on set_8khz_samplerate()
failure since postdisable does not run when preenable fails. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix transaction abort on set received ioctl due to item overflow
If the set received ioctl fails due to an item overflow when attempting to
add the BTRFS_UUID_KEY_RECEIVED_SUBVOL we have to abort the transaction
since we did some metadata updates before.
This means that if a user calls this ioctl with the same received UUID
field for a lot of subvolumes, we will hit the overflow, trigger the
transaction abort and turn the filesystem into RO mode. A malicious user
could exploit this, and this ioctl does not even requires that a user
has admin privileges (CAP_SYS_ADMIN), only that he/she owns the subvolume.
Fix this by doing an early check for item overflow before starting a
transaction. This is also race safe because we are holding the subvol_sem
semaphore in exclusive (write) mode.
A test case for fstests will follow soon. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd: Fix NULL pointer dereference in device cleanup
When GPU initialization fails due to an unsupported HW block
IP blocks may have a NULL version pointer. During cleanup in
amdgpu_device_fini_hw, the code calls amdgpu_device_set_pg_state and
amdgpu_device_set_cg_state which iterate over all IP blocks and access
adev->ip_blocks[i].version without NULL checks, leading to a kernel
NULL pointer dereference.
Add NULL checks for adev->ip_blocks[i].version in both
amdgpu_device_set_cg_state and amdgpu_device_set_pg_state to prevent
dereferencing NULL pointers during GPU teardown when initialization has
failed.
(cherry picked from commit b7ac77468cda92eecae560b05f62f997a12fe2f2) |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Always use vmcb01 in VMLOAD/VMSAVE emulation
Commit cc3ed80ae69f ("KVM: nSVM: always use vmcb01 to for vmsave/vmload
of guest state") made KVM always use vmcb01 for the fields controlled by
VMSAVE/VMLOAD, but it missed updating the VMLOAD/VMSAVE emulation code
to always use vmcb01.
As a result, if VMSAVE/VMLOAD is executed by an L2 guest and is not
intercepted by L1, KVM will mistakenly use vmcb02. Always use vmcb01
instead of the current VMCB. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: fix use-after-free in smb2_open()
The opinfo pointer obtained via rcu_dereference(fp->f_opinfo) is
dereferenced after rcu_read_unlock(), creating a use-after-free
window. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ncm: Fix atomic context locking issue
The ncm_set_alt function was holding a mutex to protect against races
with configfs, which invokes the might-sleep function inside an atomic
context.
Remove the struct net_device pointer from the f_ncm_opts structure to
eliminate the contention. The connection state is now managed by a new
boolean flag to preserve the use-after-free fix from
commit 6334b8e4553c ("usb: gadget: f_ncm: Fix UAF ncm object at re-bind
after usb ep transport error").
BUG: sleeping function called from invalid context
Call Trace:
dump_stack_lvl+0x83/0xc0
dump_stack+0x14/0x16
__might_resched+0x389/0x4c0
__might_sleep+0x8e/0x100
...
__mutex_lock+0x6f/0x1740
...
ncm_set_alt+0x209/0xa40
set_config+0x6b6/0xb40
composite_setup+0x734/0x2b40
... |
| In the Linux kernel, the following vulnerability has been resolved:
xhci: Fix NULL pointer dereference when reading portli debugfs files
Michal reported and debgged a NULL pointer dereference bug in the
recently added portli debugfs files
Oops is caused when there are more port registers counted in
xhci->max_ports than ports reported by Supported Protocol capabilities.
This is possible if max_ports is more than maximum port number, or
if there are gaps between ports of different speeds the 'Supported
Protocol' capabilities.
In such cases port->rhub will be NULL so we can't reach xhci behind it.
Add an explicit NULL check for this case, and print portli in hex
without dereferencing port->rhub. |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: avoid reading the written value in offsets array
When sending a transaction, its offsets array is first copied into the
target proc's vma, and then the values are read back from there. This is
normally fine because the vma is a read-only mapping, so the target
process cannot change the value under us.
However, if the target process somehow gains the ability to write to its
own vma, it could change the offset before it's read back, causing the
kernel to misinterpret what the sender meant. If the sender happens to
send a payload with a specific shape, this could in the worst case lead
to the receiver being able to privilege escalate into the sender.
The intent is that gaining the ability to change the read-only vma of
your own process should not be exploitable, so remove this TOCTOU read
even though it's unexploitable without another Binder bug. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Remove redundant css_put() in scx_cgroup_init()
The iterator css_for_each_descendant_pre() walks the cgroup hierarchy
under cgroup_lock(). It does not increment the reference counts on
yielded css structs.
According to the cgroup documentation, css_put() should only be used
to release a reference obtained via css_get() or css_tryget_online().
Since the iterator does not use either of these to acquire a reference,
calling css_put() in the error path of scx_cgroup_init() causes a
refcount underflow.
Remove the unbalanced css_put() to prevent a potential Use-After-Free
(UAF) vulnerability. |
