| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The auto-update implementation in Cisco Adaptive Security Appliance (ASA) Software 9.0.3.6 and earlier allows remote attackers to cause a denial of service (device reload) via crafted update data, aka Bug ID CSCui33308. |
| Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 8.0 through 8.4 allow remote attackers to cause a denial of service (connection limit exceeded) by triggering a large number of stale connections that result in an incorrect value for an MPF connection count, aka Bug ID CSCtv19854. |
| Cisco Adaptive Security Appliance (ASA) Software does not properly handle errors during the processing of DNS responses, which allows remote attackers to cause a denial of service (device reload) via a malformed response, aka Bug ID CSCuj28861. |
| Memory leak in the connection-manager implementation in Cisco Adaptive Security Appliance (ASA) Software 9.1(.3) and earlier allows remote attackers to cause a denial of service (multi-protocol management outage) by making multiple management session requests, aka Bug ID CSCug33233. |
| Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) allow remote attackers to cause a denial of service (ASDM syslog outage) via a long URL, aka Bug IDs CSCsm11264 and CSCtb92911. |
| The IPv6 implementation in Cisco Adaptive Security Appliance (ASA) Software 9.1.3 and earlier, when NAT64 or NAT66 is enabled, does not properly process NAT rules, which allows remote attackers to cause a denial of service (device reload) via crafted packets, aka Bug ID CSCue34342. |
| The Phone Proxy component in Cisco Adaptive Security Appliance (ASA) Software 9.1(.3) and earlier allows remote attackers to bypass authentication and change trust relationships by injecting a Certificate Trust List (CTL) file, aka Bug ID CSCuj66770. |
| Race condition in the Phone Proxy component in Cisco Adaptive Security Appliance (ASA) Software 9.1(.3) and earlier allows remote attackers to bypass sec_db authentication and provide certain pass-through services to untrusted devices via a crafted configuration-file TFTP request, aka Bug ID CSCuj66766. |
| Unspecified vulnerability in the SunRPC inspection feature on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 7.2 before 7.2(5), 8.0 before 8.0(5.19), 8.1 before 8.1(2.47), and 8.2 before 8.2(2) and Cisco PIX Security Appliances 500 series devices allows remote attackers to cause a denial of service (device reload) via crafted SunRPC UDP packets, aka Bug ID CSCtc79922. |
| Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services module in Cisco Catalyst 6500 series devices, with software 7.0 before 7.0(8.13), 7.1 and 7.2 before 7.2(5.4), 8.0 before 8.0(5.25), 8.1 and 8.2 before 8.2(5.11), 8.3 before 8.3(2.23), 8.4 before 8.4(2.6), and 8.5 before 8.5(1.1) and Cisco Firewall Services Module (aka FWSM) 3.1 before 3.1(21), 3.2 before 3.2(22), 4.0 before 4.0(16), and 4.1 before 4.1(7) allow remote attackers to cause a denial of service (device reload) via crafted SunRPC traffic, aka Bug IDs CSCtq06062 and CSCtq09986. |
| Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services module in Cisco Catalyst 6500 series devices, with software 7.0 before 7.0(8.13), 7.1 and 7.2 before 7.2(5.4), 8.0 before 8.0(5.25), 8.1 before 8.1(2.50), 8.2 before 8.2(5.6), 8.3 before 8.3(2.23), 8.4 before 8.4(2.7), and 8.5 before 8.5(1.1) and Cisco Firewall Services Module (aka FWSM) 3.1 before 3.1(21), 3.2 before 3.2(22), 4.0 before 4.0(16), and 4.1 before 4.1(7) allow remote attackers to cause a denial of service (device reload) via malformed ILS traffic, aka Bug IDs CSCtq57697 and CSCtq57802. |
| Unspecified vulnerability in the SunRPC inspection feature on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 7.2 before 7.2(5), 8.0 before 8.0(5.19), 8.1 before 8.1(2.47), and 8.2 before 8.2(2) and Cisco PIX Security Appliances 500 series devices allows remote attackers to cause a denial of service (device reload) via crafted SunRPC UDP packets, aka Bug ID CSCtc77567. |
| Unspecified vulnerability in the SunRPC inspection feature on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 7.2 before 7.2(5), 8.0 before 8.0(5.19), 8.1 before 8.1(2.47), and 8.2 before 8.2(2) and Cisco PIX Security Appliances 500 series devices allows remote attackers to cause a denial of service (device reload) via crafted SunRPC UDP packets, aka Bug ID CSCtc85753. |
| A vulnerability in the Secure Sockets Layer (SSL) VPN functionality of the Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause a reload of the affected system or to remotely execute code. The vulnerability is due to an attempt to double free a region of memory when the webvpn feature is enabled on the Cisco ASA device. An attacker could exploit this vulnerability by sending multiple, crafted XML packets to a webvpn-configured interface on the affected system. An exploit could allow the attacker to execute arbitrary code and obtain full control of the system, or cause a reload of the affected device. This vulnerability affects Cisco ASA Software that is running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, ASA 1000V Cloud Firewall, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4110 Security Appliance, Firepower 9300 ASA Security Module, Firepower Threat Defense Software (FTD). Cisco Bug IDs: CSCvg35618. |
| A vulnerability in the Secure Sockets Layer (SSL) Virtual Private Network (VPN) Client Certificate Authentication feature for Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to establish an SSL VPN connection and bypass certain SSL certificate verification steps. The vulnerability is due to incorrect verification of the SSL Client Certificate. An attacker could exploit this vulnerability by connecting to the ASA VPN without a proper private key and certificate pair. A successful exploit could allow the attacker to establish an SSL VPN connection to the ASA when the connection should have been rejected. This vulnerability affects Cisco Adaptive Security Appliance (ASA) and Firepower Threat Defense (FTD) Software that is running on the following Cisco products: 3000 Series Industrial Security Appliances (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliances (ASAv), Firepower 4110 Security Appliances, Firepower 9300 ASA Security Modules. Cisco Bug IDs: CSCvg40155. |
| A vulnerability in the ingress flow creation functionality of Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to cause the CPU to increase upwards of 100% utilization, causing a denial of service (DoS) condition on an affected system. The vulnerability is due to incorrect handling of an internal software lock that could prevent other system processes from getting CPU cycles, causing a high CPU condition. An attacker could exploit this vulnerability by sending a steady stream of malicious IP packets that can cause connections to be created on the targeted device. A successful exploit could allow the attacker to exhaust CPU resources, resulting in a DoS condition during which traffic through the device could be delayed. This vulnerability applies to either IPv4 or IPv6 ingress traffic. This vulnerability affects Cisco Adaptive Security Appliance (ASA) and Firepower Threat Defense (FTD) Software that is running on the following Cisco products: 3000 Series Industrial Security Appliances (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliances (ASAv), Firepower 2100 Series Security Appliances, Firepower 4110 Security Appliances, Firepower 9300 ASA Security Modules. Cisco Bug IDs: CSCvf63718. |
| A vulnerability in the implementation of Security Assertion Markup Language (SAML) Single Sign-On (SSO) authentication for Cisco AnyConnect Secure Mobility Client for Desktop Platforms, Cisco Adaptive Security Appliance (ASA) Software, and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to establish an authenticated AnyConnect session through an affected device running ASA or FTD Software. The authentication would need to be done by an unsuspecting third party, aka Session Fixation. The vulnerability exists because there is no mechanism for the ASA or FTD Software to detect that the authentication request originates from the AnyConnect client directly. An attacker could exploit this vulnerability by persuading a user to click a crafted link and authenticating using the company's Identity Provider (IdP). A successful exploit could allow the attacker to hijack a valid authentication token and use that to establish an authenticated AnyConnect session through an affected device running ASA or FTD Software. This vulnerability affects the Cisco AnyConnect Secure Mobility Client, and ASA Software and FTD Software configured for SAML 2.0-based SSO for AnyConnect Remote Access VPN that is running on the following Cisco products: 3000 Series Industrial Security Appliances (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCvg65072, CSCvh87448. |
| A vulnerability in the internal packet-processing functionality of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Security Appliances could allow an unauthenticated, remote attacker to cause an affected device to stop processing traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to the affected software improperly validating IP Version 4 (IPv4) and IP Version 6 (IPv6) packets after the software reassembles the packets (following IP Fragmentation). An attacker could exploit this vulnerability by sending a series of malicious, fragmented IPv4 or IPv6 packets to an affected device. A successful exploit could allow the attacker to cause Snort processes on the affected device to hang at 100% CPU utilization, which could cause the device to stop processing traffic and result in a DoS condition until the device is reloaded manually. This vulnerability affects Cisco Firepower Threat Defense (FTD) Software Releases 6.2.1 and 6.2.2, if the software is running on a Cisco Firepower 2100 Series Security Appliance. Cisco Bug IDs: CSCvf91098. |
| A vulnerability in the Transport Layer Security (TLS) library of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of the affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a malicious TLS message to an interface enabled for Secure Layer Socket (SSL) services on an affected device. Messages using SSL Version 3 (SSLv3) or SSL Version 2 (SSLv2) cannot be be used to exploit this vulnerability. An exploit could allow the attacker to cause a buffer underflow, triggering a crash on an affected device. This vulnerability affects Cisco ASA Software and Cisco FTD Software that is running on the following Cisco products: Adaptive Security Virtual Appliance (ASAv), Firepower Threat Defense Virtual (FTDv), Firepower 2100 Series Security Appliance. Cisco Bug IDs: CSCve18902, CSCve34335, CSCve38446. |
| Multiple vulnerabilities in the Application Layer Protocol Inspection feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerabilities are due to logical errors during traffic inspection. An attacker could exploit these vulnerabilities by sending a high volume of malicious traffic across an affected device. An exploit could allow the attacker to cause a deadlock condition, resulting in a reload of an affected device. These vulnerabilities affect Cisco ASA Software and Cisco FTD Software configured for Application Layer Protocol Inspection running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCve61540, CSCvh23085, CSCvh95456. |
