| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Input: alps - fix use-after-free bugs caused by dev3_register_work
The dev3_register_work delayed work item is initialized within
alps_reconnect() and scheduled upon receipt of the first bare
PS/2 packet from an external PS/2 device connected to the ALPS
touchpad. During device detachment, the original implementation
calls flush_workqueue() in psmouse_disconnect() to ensure
completion of dev3_register_work. However, the flush_workqueue()
in psmouse_disconnect() only blocks and waits for work items that
were already queued to the workqueue prior to its invocation. Any
work items submitted after flush_workqueue() is called are not
included in the set of tasks that the flush operation awaits.
This means that after flush_workqueue() has finished executing,
the dev3_register_work could still be scheduled. Although the
psmouse state is set to PSMOUSE_CMD_MODE in psmouse_disconnect(),
the scheduling of dev3_register_work remains unaffected.
The race condition can occur as follows:
CPU 0 (cleanup path) | CPU 1 (delayed work)
psmouse_disconnect() |
psmouse_set_state() |
flush_workqueue() | alps_report_bare_ps2_packet()
alps_disconnect() | psmouse_queue_work()
kfree(priv); // FREE | alps_register_bare_ps2_mouse()
| priv = container_of(work...); // USE
| priv->dev3 // USE
Add disable_delayed_work_sync() in alps_disconnect() to ensure
that dev3_register_work is properly canceled and prevented from
executing after the alps_data structure has been deallocated.
This bug is identified by static analysis. |
| The BSV Blockchain SDK is a unified TypeScript SDK for developing scalable apps on the BSV Blockchain. Prior to version 2.0.0, a cryptographic vulnerability in the TypeScript SDK's BRC-104 authentication implementation caused incorrect signature data preparation, resulting in signature incompatibility between SDK implementations and potential authentication bypass scenarios. The vulnerability was located in the `Peer.ts` file of the TypeScript SDK, specifically in the `processInitialRequest` and `processInitialResponse` methods where signature data is prepared for BRC-104 mutual authentication. The TypeScript SDK incorrectly prepared signature data by concatenating base64-encoded nonce strings (`message.initialNonce + sessionNonce`) then decoding the concatenated base64 string (`base64ToBytes(concatenatedString)`). This produced ~32-34 bytes of signature data instead of the correct 64 bytes. BRC-104 authentication relies on cryptographic signatures to establish mutual trust between peers. When signature data preparation is incorrect, signatures generated by the TypeScript SDK don't match those expected by Go/Python SDKs; cross-implementation authentication fails; and an attacker could potentially exploit this to bypass authentication checks. The fix in version 2.0.0 ensures all SDKs now produce identical cryptographic signatures, restoring proper mutual authentication across implementations. |
| The Curved Text plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'radius' parameter of the arctext shortcode in all versions up to, and including, 0.1 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| Improper input validation in some firmware for some Intel(R) Graphics Drivers and Intel LTS kernels within Ring 1: Device Drivers may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are present with special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (low) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Deck Mate 2 is distributed with static, hard-coded credentials for the root shell and web user interface, while multiple management services (SSH, HTTP, Telnet, SMB, X11) are enabled by default. If an attacker can reach these interfaces - most often through local or near-local access such as connecting to the USB or Ethernet ports beneath the table - the built-in credentials permit administrative login and full control of the system. Once authenticated, an attacker can access firmware utilities, modify controller software, and establish persistent compromise. Remote attack paths via network, cellular, or telemetry links may exist in specific configurations but generally require additional capabilities or operator error. The vendor reports that USB access has been disabled in current firmware builds. |
| The HTML Forms – Simple WordPress Forms Plugin for WordPress is vulnerable to Unauthenticated Stored Cross-Site Scripting in all versions up to and including 1.6.0 due to insufficient sanitization of fabricated file upload field metadata before displaying it in the WordPress admin dashboard. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute whenever an administrator accesses the form submissions page. |
| The Xpro Addons — 140+ Widgets for Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's Image Scroller widget box link attribute in all versions up to, and including, 1.4.24 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Honeywell Experion PKS and OneWireless WDM
contains Sensitive Information in Resource vulnerability in the component Control Data Access (CDA). An attacker could potentially exploit this vulnerability, leading to a Communication Channel Manipulation, which could result in buffer reuse which may cause incorrect system behavior.
Honeywell also recommends updating to the most recent version of
Honeywell Experion PKS:520.2 TCU9 HF1 and 530.1 TCU3 HF1 and OneWireless: 322.5 and 331.1.
The affected Experion PKS products are
C300, FIM4, FIM8, UOC, CN100, HCA, C300PM, and C200E. The Experion PKS versions affected are 520.1 before
520.2 TCU9 HF1 and 530 before 530 TCU3. The OneWireless WDM affected versions are 322.1 through 322.4 and 330.1 through 330.3. |
| Deck Mate 2 lacks a verified secure-boot chain and runtime integrity validation for its controller and display modules. Without cryptographic boot verification, an attacker with physical access can modify or replace the bootloader, kernel, or filesystem and gain persistent code execution on reboot. This weakness allows long-term firmware tampering that survives power cycles. The vendor indicates that more recent firmware updates strengthen update-chain integrity and disable physical update ports to mitigate related attack avenues. |
| The Breeze - WordPress Cache Plugin plugin for WordPress is vulnerable to unauthorized cache clearing in all versions up to, and including, 2.2.21. This is due to the REST API endpoint `/wp-json/breeze/v1/clear-all-cache` being registered with `permission_callback => '__return_true'` and authentication being disabled by default when the API is enabled. This makes it possible for unauthenticated attackers to clear all site caches (page cache, Varnish, and Cloudflare) via a simple POST request, granted the administrator has enabled the API integration feature. |
| Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in +F FS010M versions prior to V2.0.1_1101. If this vulnerability is exploited, an arbitrary OS command may be executed by a remote authenticated attacker. |
| Cross-Site Request Forgery (CSRF) vulnerability in tomontoast Drop Caps drop-caps allows Stored XSS.This issue affects Drop Caps: from n/a through <= 2.1. |
| Multer is a node.js middleware for handling `multipart/form-data`. A vulnerability that is present starting in version 1.4.4-lts.1 and prior to version 2.0.0 allows an attacker to trigger a Denial of Service (DoS) by sending a malformed multi-part upload request. This request causes an unhandled exception, leading to a crash of the process. Users should upgrade to version 2.0.0 to receive a patch. No known workarounds are available. |
| The WP Social Ninja – Embed Social Feeds, Customer Reviews, Chat Widgets (Google Reviews, YouTube Feed, Photo Feeds, and More) plugin for WordPress is vulnerable to unauthorized access and modification of data due to a missing capability check on the getAdvanceSettings and saveAdvanceSettings functions in all versions up to, and including, 4.0.1. This makes it possible for unauthenticated attackers to view and modify plugin's advanced settings. |
| The Coding Blocks plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 1.1.0. This is due to missing nonce validation on the settings update functionality. This makes it possible for unauthenticated attackers to update plugin settings including the theme configuration via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| The Secure Copy Content Protection and Content Locking plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 4.9.2. This is due to missing nonce validation on the 'ays_sccp_results_export_file' AJAX action. This makes it possible for unauthenticated attackers to export sensitive plugin data including email addresses, IP addresses, physical addresses, user IDs, and other user information via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. The exported data is stored in a publicly accessible file, allowing attackers to receive the sensitive information even though they are not authenticated. |
| Omnissa Workspace ONE UEM contains a Secondary Context Path Traversal Vulnerability. A malicious actor may be able to gain access to sensitive information by sending crafted GET requests (read-only) to restricted API endpoints. |
| Deck Mate 1 executes firmware directly from an external EEPROM without verifying authenticity or integrity. An attacker with physical access can replace or reflash the EEPROM to run arbitrary code that persists across reboots. Because this design predates modern secure-boot or signed-update mechanisms, affected systems should be physically protected or retired from service. The vendor has not indicated that firmware updates are available for this legacy model. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in oniswap Mini twitter feed mini-twitter-feed allows Stored XSS.This issue affects Mini twitter feed: from n/a through <= 3.0. |
| The FULL – Cliente plugin for WordPress is vulnerable to SQL Injection via the 'formId' parameter in all versions 3.1.5 to 3.1.25 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with Subscriber-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. This is only exploitable when the PRO version of the plugin is activated, along with Elementor Pro and Elementor CRM. |
