| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SDCA: Validate written enum value in ge_put_enum_double()
ge_put_enum_double() passes the user-supplied enumeration index
item[0] to snd_soc_enum_item_to_val() without checking it against the
number of items in the enum:
ret = snd_soc_enum_item_to_val(e, item[0]);
snd_soc_enum_item_to_val() indexes the heap-allocated e->values[] array
with that index (e->values is set from a devm_kcalloc() of e->items
entries), so a control write with an out-of-range item[0] reads past the
end of the values buffer. The bounds check in
snd_soc_dapm_put_enum_double() only runs afterwards, so it does not
prevent the read here.
Reject an out-of-range item before using it, matching the other enum put
handlers.
This issue was pointed out by the Sashiko AI review bot while reviewing a
related enum-validation series:
https://lore.kernel.org/all/20260609125735.CEB651F00893@smtp.kernel.org/ |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Preserve pointer spill metadata during half-slot cleanup
__clean_func_state() cleans dead stack slots in 4-byte halves. When the
high half of a STACK_SPILL slot is dead and the low half remains live,
cleanup converts the live low half to STACK_MISC or STACK_ZERO and clears
the saved spilled_ptr metadata.
That conversion is safe only for scalar spills. For a pointer spill, this
metadata clear lets a later 32-bit fill from the still-live half avoid the
normal non-scalar register-fill check and be treated as an ordinary scalar
stack read.
Leave non-scalar spill slots intact in this half-live shape. This is
conservative for pruning and preserves the existing
check_stack_read_fixed_off() rejection path for partial fills from pointer
spills. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix writes_pending and barrier reference leaks on discard failures
raid10_make_request() acquires a writes_pending reference with
md_write_start() before calling raid10_handle_discard(). Several failure
paths in raid10_handle_discard() complete the bio and return without
releasing the corresponding reference, causing md_write_end() to be
skipped.
Call md_write_end() before returning from these failure paths to keep
writes_pending accounting balanced.
Additionally, discard split allocation failures can occur after
wait_barrier() succeeds. Those paths return without calling
allow_barrier(), leaking the associated barrier reference.
Release the barrier before returning from those paths. |
| IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.5 for Linux, UNIX and Windows (includes DB2 Connect Server) could allow a local attacker to obtain sensitive information due to the logging of plain text passwords in trace files. |
| Dell Wyse Management Suite (WMS), versions prior to 2605.0.2, contain an Unrestricted Upload of File with Dangerous Type vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Remote Code Execution. |
| Improper Handling of Case Sensitivity vulnerability in elixir-tesla tesla allows credential leakage to a third-party origin on cross-origin redirects.
Tesla.Middleware.FollowRedirects strips security-sensitive headers on cross-origin redirects using a case-sensitive string comparison against a lowercase filter list (@filter_headers ["authorization", "host"]). HTTP header names are case-insensitive per RFC 7230, but Tesla preserves header keys verbatim as supplied by the caller without normalizing case. A header set as {"Authorization", "Bearer …"} (the RFC 7235 canonical casing used by virtually all HTTP libraries and documentation) does not match the lowercase filter entry and is forwarded to the redirect destination. An attacker who can control or influence a Location: response seen by the client (via their own endpoint, a redirect-open upstream, or a compromised origin) receives the bearer token or other Authorization material on the cross-origin request.
This issue affects tesla: from 1.4.0 before 1.18.3. |
| DO NOT USE THIS CVE RECORD. ConsultIDs: none. Reason: This record was withdrawn by its CNA. Further investigation showed that it was not a security issue. Notes: none. |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: add missing rcu list annotations and operations
sashiko-bot remarked the missing use of list_add_rcu() in
bcm_[rx|tx]_setup() to have a proper initialized bcm_op structure
when bcm_proc_show() traverses the bcm_op's under rcu_read_lock().
To cover all initial settings of the bcm_op's the list_add_rcu() calls
are moved to the end of the setup code.
While at it, also fix the mirroring removal side: bcm_release() called
bcm_remove_op() - which frees the op via call_rcu() - on ops that were
still linked in bo->tx_ops/bo->rx_ops, without list_del_rcu() first.
Unlink each op with list_del_rcu() before handing it to bcm_remove_op(),
matching the existing pattern in bcm_delete_tx_op()/bcm_delete_rx_op(). |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: make system files immutable to prevent corruption
When a system file such as $Bitmap is exposed via show_sys_files and
written from userspace, the volume is corrupted and, because the cluster
allocator scans $Bitmap through the same inode's page cache, a write to
$Bitmap also deadlocks writeback against the folio it already holds locked.
These files are maintained by the driver itself and have no valid reason
to be written through the file interface. Mark base metadata files
(mft_no < FILE_first_user) as immutable during inode read so the VFS
rejects write, mmap, truncate and unlink with -EPERM. Directories are
skipped so the root and $Extend remain usable. Internal metadata updates
do not go through the VFS write path and are unaffected. |
| The WooMS WordPress plugin through 9.14 does not validate a user-supplied URL before using it in a server-side request and attaches stored third-party integration credentials to every such request, allowing unauthenticated attackers to perform Server-Side Request Forgery and to disclose the configured integration credentials when the relevant data-sync feature is enabled. |
| UpTrain is an open-source platform to evaluate and improve generative AI applications. In version 0.7.1 and prior, the UpTrain backend creates a new default user with a static username, where the username is also used as the default API key. The UpTrain backend also has an open CORS policy. Using these two primitives, any website can make a authenticated cross-origin request to the UpTrain instance by providing the default API key in the header `uptrain-access-token`. This issue may allow arbitrary websites to perform privileged operations on the UpTrain instance, as if they were the default logged in user. As of time of publication, no known patches are available. |
| In JetBrains YouTrack before 2026.2.18112 an authenticated user could enumerate accounts via the users search endpoint |
| Glances is an open-source system cross-platform monitoring tool. Prior to 4.5.6, GlancesActions.run() in glances/actions.py ignores --disable-config-exec for on-alert action commands and invokes secure_popen() with shell operators enabled, allowing configured redirection, command chaining, or pipes to execute when an alert triggers. This issue is fixed in 4.5.6. |
| Joomla Extension - regularlabs.com - Unauthenticated RCE through unverified reflected user input in Sourcerer < 14.0.0 - Regular Labs Sourcerer before 14.0.0 processes {source} blocks found in Joomla’s final rendered HTML without reliably determining where that code originated. |
| IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.8 is affected by a denial of service caused by insecure deserialization. A low-privileged, administrative user could exploit this vulnerability to consume system resources when the restConnector-2.0 feature is enabled. |
| Dell Wyse Management Suite (WMS), versions prior to 2605.0.2, contain an Improper Deserialization of Untrusted Data vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Privilege Escalation. |
| IBM i Access Client Solutions 1.1.2.0 through 1.1.9.13 is vulnerable to arbitrary code execution on Windows when installed for all users due to publicly writeable directory. |
| Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in elixir-tesla tesla allows a denial of service via decompression bomb in HTTP response bodies.
When Tesla.Middleware.DecompressResponse or Tesla.Middleware.Compression is included in a Tesla middleware pipeline, HTTP response bodies are decompressed eagerly with no size limit. The decompress_body/2 function in lib/tesla/middleware/compression.ex passes the entire response body to :zlib.gunzip/1 or :zlib.unzip/1 without any cap on the output size. Additionally, compression_algorithms/1 splits the content-encoding header on commas and decompress_body/2 recurses once per token, applying a decompression pass on each iteration. A server advertising content-encoding: gzip, gzip, gzip, gzip causes four recursive decompression passes, yielding exponential amplification: each gzip layer can expand its input roughly 1000x, so a payload of a few hundred bytes on the wire inflates to gigabytes of BEAM heap, exhausting memory and crashing or freezing the calling process.
This issue affects tesla: from 0.6.0 before 1.18.3. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
