| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In some circumstances, debug artifacts uploaded by the CodeQL Action after a failed code scanning workflow run may contain the environment variables from the workflow run, including any secrets that were exposed as environment variables to the workflow. Users with read access to the repository would be able to access this artifact, containing any secrets from the environment. This vulnerability is patched in CodeQL Action version 3.28.3 or later, or CodeQL CLI version 2.20.3 or later.
For some affected workflow runs, the exposed environment variables in the debug artifacts included a valid `GITHUB_TOKEN` for the workflow run, which has access to the repository in which the workflow ran, and all the permissions specified in the workflow or job. The `GITHUB_TOKEN` is valid until the job completes or 24 hours has elapsed, whichever comes first.
Environment variables are exposed only from workflow runs that satisfy all of the following conditions:
- Code scanning workflow configured to scan the Java/Kotlin languages.
- Running in a repository containing Kotlin source code.
- Running with debug artifacts enabled.
- Using CodeQL Action versions <= 3.28.2, and CodeQL CLI versions >= 2.9.2 (May 2022) and <= 2.20.2.
- The workflow run fails before the CodeQL database is finalized within the `github/codeql-action/analyze` step.
- Running in any GitHub environment: GitHub.com, GitHub Enterprise Cloud, and GitHub Enterprise Server. Note: artifacts are only accessible to users within the same GitHub environment with access to the scanned repo.
The `GITHUB_TOKEN` exposed in this way would only have been valid for workflow runs that satisfy all of the following conditions, in addition to the conditions above:
- Using CodeQL Action versions >= 3.26.11 (October 2024) and <= 3.28.2, or >= 2.26.11 and < 3.
- Running in GitHub.com or GitHub Enterprise Cloud only (not valid on GitHub Enterprise Server).
In rare cases during advanced setup, logging of environment variables may also occur during database creation of Java, Swift, and C/C++. Please read the corresponding CodeQL CLI advisory GHSA-gqh3-9prg-j95m for more details.
In CodeQL CLI versions >= 2.9.2 and <= 2.20.2, the CodeQL Kotlin extractor logs all environment variables by default into an intermediate file during the process of creating a CodeQL database for Kotlin code. This is a part of the CodeQL CLI and is invoked by the CodeQL Action for analyzing Kotlin repositories.
On Actions, the environment variables logged include GITHUB_TOKEN, which grants permissions to the repository being scanned.
The intermediate file containing environment variables is deleted when finalizing the database, so it is not included in a successfully created database. It is, however, included in the debug artifact that is uploaded on a failed analysis run if the CodeQL Action was invoked in debug mode.
Therefore, under these specific circumstances (incomplete database creation using the CodeQL Action in debug mode) an attacker with access to the debug artifact would gain unauthorized access to repository secrets from the environment, including both the `GITHUB_TOKEN` and any user-configured secrets made available via environment variables.
The impact of the `GITHUB_TOKEN` leaked in this environment is limited:
- For workflows on GitHub.com and GitHub Enterprise Cloud using CodeQL Action versions >= 3.26.11 and <= 3.28.2, or >= 2.26.11 and < 3, which in turn use the `actions/artifacts v4` library, the debug artifact is uploaded before the workflow job completes. During this time the `GITHUB_TOKEN` is still valid, providing an opportunity for attackers to gain access to the repository.
- For all other workflows, the debug artifact is uploaded after the workflow job completes, at which point the leaked `GITHUB_TOKEN` has been revoked and cannot be used to access the repository. |
| In PEAR HTTP_Request2 before 2.7.0, multiple files in the tests directory, notably tests/_network/getparameters.php and tests/_network/postparameters.php, reflect any GET or POST parameters, leading to XSS. |
| GitHub Desktop is an open-source Electron-based GitHub app designed for git development. An attacker convincing a user to clone a repository directly or through a submodule can allow the attacker access to the user's credentials through the use of maliciously crafted remote URL. GitHub Desktop relies on Git to perform all network related operations (such as cloning, fetching, and pushing). When a user attempts to clone a repository GitHub Desktop will invoke `git clone` and when Git encounters a remote which requires authentication it will request the credentials for that remote host from GitHub Desktop using the git-credential protocol. Using a maliciously crafted URL it's possible to cause the credential request coming from Git to be misinterpreted by Github Desktop such that it will send credentials for a different host than the host that Git is currently communicating with thereby allowing for secret exfiltration. GitHub username and OAuth token, or credentials for other Git remote hosts stored in GitHub Desktop could be improperly transmitted to an unrelated host. Users should update to GitHub Desktop 3.4.12 or greater which fixes this vulnerability. Users who suspect they may be affected should revoke any relevant credentials. |
| An issue was discovered in the method push.lite.avtech.com.AvtechLib.GetHttpsResponse in AVTECH EagleEyes Lite 2.0.0, the GetHttpsResponse method transmits sensitive information - including internal server URLs, account IDs, passwords, and device tokens - as plaintext query parameters over HTTPS |
| Information disclosure and exposure of authentication FTP credentials over the debug port 1604 in the MINOVA TTA service. This allows unauthenticated remote access to an active FTP account containing sensitive internal data and import structures. In environments where this FTP server is part of automated business processes (e.g. EDI or data integration), this could lead to data manipulation, extraction, or abuse. Debug ports 1602, 1603 and 1636 also expose service architecture information and system activity logs |
| Improper Link Resolution Before File Access ('Link Following') vulnerability in yrutschle sslh.This issue affects sslh: before 2.2.2. |
| A vulnerability was found in ORIPA up to 1.72. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file src/main/java/oripa/persistence/doc/loader/LoaderXML.java. The manipulation leads to deserialization. The attack can be launched remotely. Upgrading to version 1.80 is able to address this issue. It is recommended to upgrade the affected component. The identifier VDB-270169 was assigned to this vulnerability. |
| Information Exposure vulnerability in Hitachi JP1/IT Desktop Management 2 - Smart Device Manager on Windows.This issue affects JP1/IT Desktop Management 2 - Smart Device Manager: from 12-00 before 12-00-08, from 11-10 through 11-10-08, from 11-00 through 11-00-05, from 10-50 through 10-50-06. |
| A vulnerability was discovered in the Arctera InfoScale 7.0 through 8.0.2 where a .NET remoting endpoint can be exploited due to the insecure deserialization of potentially untrusted messages. The vulnerability is present in the Windows Plugin_Host service, which runs on all the servers where InfoScale is installed. The service is used only when applications are configured for Disaster Recovery (DR) using the DR wizard. Disabling the Plugin_Host service manually will eliminate the vulnerability. |
| A remote code execution vulnerability exists in Kaltura versions prior to 11.1.0-2 due to unsafe deserialization of user-controlled data within the keditorservices module. An unauthenticated remote attacker can exploit this issue by sending a specially crafted serialized PHP object in the kdata GET parameter to the redirectWidgetCmd endpoint. Successful exploitation leads to execution of arbitrary PHP code in the context of the web server process. |
| A vulnerability was found in Performance Co-Pilot (PCP). This flaw can only be exploited if an attacker has access to a compromised PCP system account. The issue is related to the pmpost tool, which is used to log messages in the system. Under certain conditions, it runs with high-level privileges. |
| Ubee EVW3226 cable modem/routers firmware versions up to and including 1.0.20 store configuration backup files in the web root after they are generated for download. These backup files remain accessible without authentication until the next reboot. A remote attacker on the local network can request 'Configuration_file.cfg' directly to obtain the backup archive. Because backup files are not encrypted, they expose sensitive information including the plaintext admin password, allowing full compromise of the device. |
| Buildx is a Docker CLI plugin that extends build capabilities using BuildKit.
Cache backends support credentials by setting secrets directly as attribute values in cache-to/cache-from configuration. When supplied as user input, these secure values may be inadvertently captured in OpenTelemetry traces as part of the arguments and flags for the traced CLI command. OpenTelemetry traces are also saved in BuildKit daemon's history records.
This vulnerability does not impact secrets passed to the Github cache backend via environment variables or registry authentication. |
| An issue in the storage of NFC card data in Dorset DG 201 Digital Lock H5_433WBSK_v2.2_220605 allows attackers to produce cloned NFC cards to bypass authentication. |
| A vulnerability has been identified in SIMATIC STEP 7 Safety V16 (All versions < V16 Update 7), SIMATIC STEP 7 Safety V17 (All versions < V17 Update 7), SIMATIC STEP 7 Safety V18 (All versions < V18 Update 2), SIMATIC STEP 7 V16 (All versions < V16 Update 7), SIMATIC STEP 7 V17 (All versions < V17 Update 7), SIMATIC STEP 7 V18 (All versions < V18 Update 2), SIMATIC WinCC Unified V16 (All versions < V16 Update 7), SIMATIC WinCC Unified V17 (All versions < V17 Update 7), SIMATIC WinCC Unified V18 (All versions < V18 Update 2), SIMATIC WinCC V16 (All versions < V16.7), SIMATIC WinCC V17 (All versions < V17.7), SIMATIC WinCC V18 (All versions < V18 Update 2), SIMOCODE ES V16 (All versions < V16 Update 7), SIMOCODE ES V17 (All versions < V17 Update 7), SIMOCODE ES V18 (All versions < V18 Update 2), SIMOTION SCOUT TIA V5.4 SP1 (All versions), SIMOTION SCOUT TIA V5.4 SP3 (All versions), SIMOTION SCOUT TIA V5.5 SP1 (All versions), SINAMICS Startdrive V16 (All versions), SINAMICS Startdrive V17 (All versions), SINAMICS Startdrive V18 (All versions), SIRIUS Safety ES V17 (All versions < V17 Update 7), SIRIUS Safety ES V18 (All versions < V18 Update 2), SIRIUS Soft Starter ES V17 (All versions < V17 Update 7), SIRIUS Soft Starter ES V18 (All versions < V18 Update 2), Soft Starter ES V16 (All versions < V16 Update 7), TIA Portal Cloud V3.0 (All versions < V18 Update 2). Affected applications do not properly restrict the .NET BinaryFormatter when deserializing hardware configuration profiles. This could allow an attacker to cause a type confusion and execute arbitrary code within the affected application.
This is the same issue that exists for .NET BinaryFormatter https://docs.microsoft.com/en-us/visualstudio/code-quality/ca2300. |
| A vulnerability has been identified in SIMATIC S7-PLCSIM V16 (All versions), SIMATIC S7-PLCSIM V17 (All versions), SIMATIC STEP 7 Safety V16 (All versions), SIMATIC STEP 7 Safety V17 (All versions < V17 Update 8), SIMATIC STEP 7 Safety V18 (All versions < V18 Update 5), SIMATIC STEP 7 V16 (All versions), SIMATIC STEP 7 V17 (All versions < V17 Update 8), SIMATIC STEP 7 V18 (All versions < V18 Update 5), SIMATIC WinCC Unified V16 (All versions), SIMATIC WinCC Unified V17 (All versions < V17 Update 8), SIMATIC WinCC Unified V18 (All versions < V18 SP5), SIMATIC WinCC V16 (All versions), SIMATIC WinCC V17 (All versions < V17 Update 8), SIMATIC WinCC V18 (All versions < V18 SP5), SIMOCODE ES V16 (All versions), SIMOCODE ES V17 (All versions < V17 Update 8), SIMOCODE ES V18 (All versions), SIMOTION SCOUT TIA V5.4 SP1 (All versions), SIMOTION SCOUT TIA V5.4 SP3 (All versions), SIMOTION SCOUT TIA V5.5 SP1 (All versions), SINAMICS Startdrive V16 (All versions), SINAMICS Startdrive V17 (All versions), SINAMICS Startdrive V18 (All versions), SIRIUS Safety ES V17 (TIA Portal) (All versions < V17 Update 8), SIRIUS Safety ES V18 (TIA Portal) (All versions), SIRIUS Soft Starter ES V17 (TIA Portal) (All versions < V17 Update 8), SIRIUS Soft Starter ES V18 (TIA Portal) (All versions), TIA Portal Cloud V16 (All versions), TIA Portal Cloud V17 (All versions < V4.6.0.1), TIA Portal Cloud V18 (All versions < V4.6.1.0). Affected products do not properly sanitize user-controllable input when parsing user settings. This could allow an attacker to cause a type confusion and execute arbitrary code within the affected application. |
| A vulnerability has been identified in SIMATIC STEP 7 Safety V18 (All versions < V18 Update 2). Affected applications do not properly restrict the .NET BinaryFormatter when deserializing user-controllable input. This could allow an attacker to cause a type confusion and execute arbitrary code within the affected application.
This is the same issue that exists for .NET BinaryFormatter https://docs.microsoft.com/en-us/visualstudio/code-quality/ca2300. |
| Deserialization of Untrusted Data vulnerability in designthemes Insurance insurance allows Object Injection.This issue affects Insurance: from n/a through <= 3.5. |
| Deserialization of Untrusted Data vulnerability in designthemes Solar Energy solar allows Object Injection.This issue affects Solar Energy: from n/a through <= 3.5. |
| A flaw was found in Open Cluster Management (OCM) when a user has access to the worker nodes which contain the cluster-manager or klusterlet deployments. The cluster-manager deployment uses a service account with the same name "cluster-manager" which is bound to a ClusterRole also named "cluster-manager", which includes the permission to create Pod resources. If this deployment runs a pod on an attacker-controlled node, the attacker can obtain the cluster-manager's token and steal any service account token by creating and mounting the target service account to control the whole cluster. |
