| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Drop task_to_inode and inet_conn_established from lsm sleepable hooks
bpf_lsm_task_to_inode() is called under rcu_read_lock() and
bpf_lsm_inet_conn_established() is called from softirq context, so
neither hook can be used by sleepable LSM programs. |
| Pegatron `Tdelo64.sys` improperly exposes privileged hardware access functionality through the `\\.\TdeIo` device interface. IOCTL handlers including `TDE_IOCTL_INDEXIO_READ` and `TDE_IOCTL_INDEXIO_WRITE` permit unprivileged user-mode callers to perform arbitrary hardware I/O port reads and writes without authorization checks. A local attacker can abuse this functionality to manipulate hardware registers, tamper with firmware-related interfaces, cause system instability, or establish persistent low-level compromise. |
| A denial of service vulnerability due to a deadlock was found in sctp_auto_asconf_init in net/sctp/socket.c in the Linux kernel’s SCTP subsystem. This flaw allows guests with local user privileges to trigger a deadlock and potentially crash the system. |
| A flaw was found in the blkgs destruction path in block/blk-cgroup.c in the Linux kernel, leading to a cgroup blkio memory leakage problem. When a cgroup is being destroyed, cgroup_rstat_flush() is only called at css_release_work_fn(), which is called when the blkcg reference count reaches 0. This circular dependency will prevent blkcg and some blkgs from being freed after they are made offline. This issue may allow an attacker with a local access to cause system instability, such as an out of memory error. |
| view_component is a framework for building reusable, testable, and encapsulated view components in Ruby on Rails. From 4.0.0 until 4.12.0, ViewComponent::Base instances retain render-scoped objects across calls to render_in; if the same component, collection, or spacer component instance is reused across requests, users, tenants, or threads, later renders can use stale helpers, controller, request, view_flow, format/variant details, and slot child context from an earlier render. This can cause authorization-aware components to render privileged UI for a lower-privileged user, generate links using a stale Host header, leak slot/helper state, and mix request context under concurrent rendering. This issue is fixed in version 4.12.0. |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix queue freeze vs limits lock order in sysfs store methods
queue_attr_store() always freezes a device queue before calling the
attribute store operation. For attributes that control queue limits, the
store operation will also lock the queue limits with a call to
queue_limits_start_update(). However, some drivers (e.g. SCSI sd) may
need to issue commands to a device to obtain limit values from the
hardware with the queue limits locked. This creates a potential ABBA
deadlock situation if a user attempts to modify a limit (thus freezing
the device queue) while the device driver starts a revalidation of the
device queue limits.
Avoid such deadlock by not freezing the queue before calling the
->store_limit() method in struct queue_sysfs_entry and instead use the
queue_limits_commit_update_frozen helper to freeze the queue after taking
the limits lock.
This also removes taking the sysfs lock for the store_limit method as
it doesn't protect anything here, but creates even more nesting.
Hopefully it will go away from the actual sysfs methods entirely soon.
(commit log adapted from a similar patch from Damien Le Moal) |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: use chan timer to close channels in cleanup_listen()
l2cap_chan_close() removes the channel from conn->chan_l, which
must be done under conn->lock. cleanup_listen() runs under the
parent sk_lock, so acquiring conn->lock would invert the
established conn->lock -> chan->lock -> sk_lock order.
Instead of calling l2cap_chan_close() directly, schedule
l2cap_chan_timeout with delay 0 to close the channel
asynchronously. The timeout handler already acquires conn->lock
and chan->lock in the correct order.
The timer is only armed when chan->conn is still set: if it is
already NULL, l2cap_conn_del() has already processed this channel
(l2cap_chan_del + l2cap_sock_teardown_cb + l2cap_sock_close_cb),
so there is nothing left to do. If l2cap_conn_del() races in
after the timer is armed, __clear_chan_timer() inside
l2cap_chan_del() cancels it; if the timer has already fired, the
handler returns harmlessly because chan->conn was cleared. |
| Quicly is an IETF QUIC protocol implementation intended primarily for use within the H2O HTTP server. Prior to commit dccf5d4, Quicly was vulnerable to stateless reset injection through lack of packet entry validation. The QUIC protocol is designed to withstand packet injection attacks, once the handshake is complete. Only packets that carry some secret patterns are considered as stateless resets. Quicly allows the peer to share up to 4 such patterns per connection. However, until now, it failed to determine which of the 4 slots that it uses to retain the secret patterns contains a valid entry. As the slots are zero-initialized, the failure meant that, unless the peer advertised 4 of such patterns, an all-zero pattern was treated as a stateless reset.In effect, this allowed an on-path attacker to reset QUIC connections governed by Quicly. This issue has been fixed by commit dccf5d4. |
| nesquena hermes-webui contains an environment variable leakage vulnerability where profile switching does not clear environment variables from the previously active profile before loading the next profile. Attackers or users can exploit additive dotenv reload behavior to access provider API keys and other sensitive secrets from one profile context in another profile, breaking expected security isolation between profiles. |
| The USB CDC-NCM device class (subsys/usb/device_next/class/usbd_cdc_ncm.c) ignores the return value of usbd_ep_enqueue() in its ethernet transmit callback cdc_ncm_send(). When the enqueue fails, the function still calls k_sem_take(&data->sync_sem, K_FOREVER), blocking on a completion semaphore that is only ever signaled from the bulk-IN transfer-completion callback. Because nothing was enqueued, that callback never fires and the calling thread — a shared network traffic-class TX thread — deadlocks permanently while holding the interface TX lock, halting transmission until reboot (and leaking the transmit buffer).
The enqueue fails under conditions controlled by the attached USB host: usbd_ep_enqueue() returns -EPERM whenever the bus is suspended (a standard, persistent host operation), and the underlying udc_ep_enqueue() returns -EPERM/-ENODEV on disconnect, bus reset, or endpoint disable. The cdc_ncm_send() guard only checks the DATA_IFACE_ENABLED and IFACE_UP flags, not the suspended state, so a packet transmitted while the host holds the bus suspended reaches the failing enqueue and deadlocks the TX path.
The realistic trigger is a bus suspend that occurs while the exported network interface is active and has traffic to send — host sleep, USB selective/auto-suspend, or hub power management — after which any device-originated packet deadlocks the path, recoverable only by reboot. The impact is a persistent loss of the virtual network connection between the host's NCM interface and the Zephyr device; because the deadlocked thread is a shared traffic-class TX thread, egress on other network interfaces can stall as well. There is no memory corruption or information disclosure.
The defect was introduced with the CDC-NCM driver and shipped in releases through v4.4.0; it is fixed by checking the usbd_ep_enqueue() return value and freeing the buffer before the blocking wait. |
| Lima launches Linux virtual machines, typically on macOS, for running containerd. Prior to 2.1.3, on an instance of Lima running with the qemu driver, an arbitrary user in the VM could access /run/lima-guestagent.sock when the guest agent is enabled, which could result in running arbitrary commands with root privileges in the VM because the guest agent socket provides tunneling for arbitrary addresses, including Unix socket addresses for privileged daemons like D-Bus. This issue is fixed in version 2.1.3. |
| CoreWCF is a port of the service side of Windows Communication Foundation (WCF) to .NET Core. Prior to 1.8.1 and 1.9.1, CoreWCF NetNamedPipe transport accepts attachment to a pre-existing named pipe instance, allowing local interception of NetNamedPipe traffic when an attacker races NamedPipeListener startup between shared memory GUID publication and service named pipe creation. This issue is fixed in versions 1.8.1 and 1.9.1. |
| FOSSBilling is a free, open-source billing and client management system. Prior to version 0.8.1, downloadable product files are stored using a deterministic filename-derived path. When an administrator uploads a file for a downloadable product, FOSSBilling stores the file as `md5(<original filename>)` under the uploads directory. Because the stored path depends only on the client-supplied filename, two different downloadable products, or product/order files, uploaded with the same original filename will resolve to the same stored file path. A later upload can overwrite an earlier upload, causing customers or administrators downloading the earlier product to receive the later file instead. Version 0.8.1 patches the issue. Some workarounds are available. Restrict the `servicedownloadable.manage` permission to fully trusted administrators only. As an operational mitigation, ensure downloadable product files use unique filenames before upload. This reduces accidental collisions but does not fully address the underlying issue. |
| A vulnerability has been found in DeepMyst Mysti up to 0.4.0. The affected element is the function initProjectMemory of the file src/managers/MemoryManager.ts of the component Per-Project Auto-Memory Handler. Such manipulation of the argument workspacePath leads to exposure of resource. The attack may be performed from remote. Upgrading to version 0.4.0 is sufficient to fix this issue. The name of the patch is 6d709229b5199f6769fb3cf763e5122dcc43c079. It is advisable to upgrade the affected component. |
| Emerson Dixell XWEB-500 products are affected by arbitrary file write vulnerability in /cgi-bin/logo_extra_upload.cgi, /cgi-bin/cal_save.cgi, and /cgi-bin/lo_utils.cgi. An attacker will be able to write any file on the target system without any kind of authentication mechanism, and this can lead to denial of service and potentially remote code execution. Note: the product has not been supported since 2018 and should be removed or replaced. |
| In the Linux kernel, the following vulnerability has been resolved:
debugobjects: Don't call fill_pool() in early boot hardirq context
When booting a debug PREEMPT_RT kernel on an ARM64 system, a "inconsistent
{HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage" lockdep warning message was
reported to the console.
During early boot, interrupts are enabled before the scheduler is
enabled. In this window (before SYSTEM_SCHEDULING is set) interrupts can
fire and in the hard interrupt context handler attempt to fill the pool
This can lead to a deadlock when the interrupt occurred when the interrupt
hits a region which holds a lock that is required to be taken in the
allocation path.
Add a new can_fill_pool() helper and reorder the exception rule and forbid
this scenario by excluding allocations from hard interrupt context. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: fix potential deadlock in mt7921_roc_abort_sync
roc_abort_sync() can deadlock with roc_work(). roc_work() holds
dev->mt76.mutex, while cancel_work_sync() waits for roc_work()
to finish. If the caller already owns the same mutex, both
sides block and no progress is possible.
This deadlock can occur during station removal when
mt76_sta_state() -> mt76_sta_remove() -> mt7921_mac_sta_remove() ->
mt7921_roc_abort_sync() invokes cancel_work_sync() while
roc_work() is still running and holding dev->mt76.mutex.
This avoids the mutex deadlock and preserves exactly-once
work ownership. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: core: fix locking in regulator_resolve_supply() error path
If late enabling of a supply regulator fails in
regulator_resolve_supply(), the code currently triggers a lockdep
warning:
WARNING: drivers/regulator/core.c:2649 at _regulator_put+0x80/0xa0, CPU#6: kworker/u32:4/596
...
Call trace:
_regulator_put+0x80/0xa0 (P)
regulator_resolve_supply+0x7cc/0xbe0
regulator_register_resolve_supply+0x28/0xb8
as the regulator_list_mutex must be held when calling _regulator_put().
To solve this, simply switch to using regulator_put().
While at it, we should also make sure that no concurrent access happens
to our rdev while we clear out the supply pointer. Add appropriate
locking to ensure that.
While the code in question will be removed altogether in a follow-up
commit, I believe it is still beneficial to have this corrected before
removal for future reference. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject sleepable kprobe_multi programs at attach time
kprobe.multi programs run in atomic/RCU context and cannot sleep.
However, bpf_kprobe_multi_link_attach() did not validate whether the
program being attached had the sleepable flag set, allowing sleepable
helpers such as bpf_copy_from_user() to be invoked from a non-sleepable
context.
This causes a "sleeping function called from invalid context" splat:
BUG: sleeping function called from invalid context at ./include/linux/uaccess.h:169
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1787, name: sudo
preempt_count: 1, expected: 0
RCU nest depth: 2, expected: 0
Fix this by rejecting sleepable programs early in
bpf_kprobe_multi_link_attach(), before any further processing. |
| A flaw was found in the X server's request handling. Non-zero 'bytes to ignore' in a client's request can cause the server to skip processing another client's request, potentially leading to a denial of service. |
