| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Mirai botnet through 2024-08-19 mishandles simultaneous TCP connections to the CNC (command and control) server. Unauthenticated sessions remain open, causing resource consumption. For example, an attacker can send a recognized username (such as root), or can send arbitrary data. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to versions 7.0.16 and 8.0.5, certain NFS parser state structures were insufficiently bounded. Crafted NFS traffic may cause Suricata to consume excessive memory, potentially resulting in denial of service. Versions 7.0.16 and 8.0.5 contain a fix. As a workaround, disable NFS application-layer parsing if it is not needed. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to versions 7.0.16 and 8.0.5, DNP3 reassembly could buffer data without sufficient parser-level bounds. Crafted DNP3 traffic may cause Suricata to consume excessive memory, potentially resulting in denial of service. Versions 7.0.16 and 8.0.5 contain a fix. As a workaround, disable DNP3 (which is not enabled by default) if it is not needed, and/or define a limited `stream.reassembly.depth` (0 or absent is unlimited). |
| A security vulnerability has been detected in ag-ui-protocol ag-ui 1.0. This affects an unknown function of the file sdks/community/go/pkg/client/sse/client.go of the component SSE Client. Such manipulation leads to resource consumption. The attack can be executed remotely. The pull request to fix this issue awaits acceptance. |
| A vulnerability was found in vllm-project vLLM 0.26.0/0.27.0. Affected is the function MoRIIOConnectorScheduler.request_finished/MoRIIOConnectorWorker.get_finished/MoRIIOWrapper._handle_release_message of the file vllm/distributed/kv_transfer/kv_connector/v1/moriio/moriio_connector.py of the component MoRIIO Acknowledgement Handler. Performing a manipulation of the argument request_id/kv_transfer_params results in resource consumption. It is possible to initiate the attack remotely. The project was informed of the problem early through a pull request but has not reacted yet. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to versions 7.0.16 and 8.0.5, Suricata could repeatedly perform expensive parsing of large HTTP `Content-Disposition` headers during HTTP response body processing. Crafted HTTP traffic could cause excessive CPU usage and denial of service. Versions 7.0.16 and 8.0.5 contain a fix. As a workaround, use a rule like `alert http1 any any -> any any (sid: 1; http.request_header; content: "Content-Disposition:"; startswith; bsize: > 8192; bypass;)`. |
| A flaw was found in the theme localization endpoints of the keycloak-services component, which is the core service responsible for authentication flows and theme management in Keycloak. The issue occurs because the system accepts arbitrary locale tags from unauthenticated requests and stores them in a permanent in-memory cache without limits. An attacker can exploit this by sending a large number of unique locale tags, eventually causing the server to run out of memory and crash. |
| multiparty is a Node.js library for parsing multipart/form-data request bodies. In versions from 2.1.0 up to but not including 4.3.1, the parser does not bound the amount of memory used while accumulating the headers of a single multipart part. An unauthenticated attacker can send a single request whose part carries a very large volume of header bytes, forcing the parser to buffer all of them and exhausting the process memory, which crashes the server. This is a denial of service with no confidentiality or integrity impact. The issue is fixed in multiparty 4.3.1, which caps the size of the accumulated part headers. Users should upgrade to multiparty 4.3.1 or later. |
| A vulnerability was identified in a2ui-project a2ui up to 0.10.6. Affected is an unknown function of the file renderers/web_core/src/v0_9/basic_catalog/functions/safe_regex.ts of the component Basic Catalog. Such manipulation leads to inefficient regular expression complexity. The attack can be launched remotely. |
| OpenCTI is an open source platform for managing cyber threat intelligence knowledge and observables. Prior to 7.260706.0, the JSON ingestion mapper's extractWithRegexp formula function compiled a user-supplied regular expression with the JavaScript RegExp engine in opencti-platform/opencti-graphql/src/parser/json-mapper.ts without validating its complexity. An authenticated user with JSON mapper creation permission could provide a catastrophically backtracking pattern and matching ingestion input, blocking the Node.js event loop and making the GraphQL API unavailable to all users. Scheduled ingestion could repeatedly execute the malicious mapper without additional attacker action, and recovery could require disabling the mapper and restarting the process. The issue affects availability and does not expose or modify data. This issue is fixed in version 7.260706.0. |
| Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, The shared WebSocket decoder permits unbounded message buffering because defragmentation accumulates fragments without a limit and FrameTranscoder accepts declared lengths up to Int.MaxValue. A remote client that completes a WebSocket handshake against an http4s-blaze-server or http4s-ember-server endpoint can exhaust server memory with oversized frames or fragmented messages. The patched decoder applies a configurable 64 MiB default limit to individual frames and defragmented messages through EmberServerBuilder.withMaxWebSocketMessageSize. This issue is fixed in versions 0.23.35 and 1.0.0-M47. |
| emp3r0r is a C2 designed by Linux users for Linux environments. Prior to version 4.2.5, the `http_poll` C2 transport accepts attacker-controlled HTTP polling sessions before CBOR `MsgAuth` authentication is completed. A remote unauthenticated attacker can create arbitrary polling sessions and send request bodies that are forwarded into the C2 dispatch path. This can consume server resources and trigger pre-auth C2 processing. Version 4.2.5 patches the issue. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Starting in version 8.0.0 and prior to version 8.0.5, LDAP transaction state could store an unbounded number of responses. Because LDAP can be processed over UDP, crafted traffic may cause Suricata to consume excessive memory, potentially resulting in denial of service. Version 8.0.5 contains a fix. As a workaround, disable LDAP application-layer parsing where it is not required. Alternatively, use a rule like `alert ldap any any -> any any (sid: 1; ldap.responses.count: >1024; bypass;)`. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to versions 7.0.16 and 8.0.5,IKEv2 parser state could grow without bounds while storing client transforms. Repeated crafted UDP traffic may cause Suricata to consume excessive memory, potentially resulting in denial of service. Versions 7.0.16 and 8.0.5 fix the issue. Some workarounds are available. Disable IKE application-layer parsing if it is not needed. Alternatively, use a rule to bypass ike flows after the first packets like `alert ike any any -> any any (sid: 2; flow.pkts_toserver: > 256; bypass; noalert;)`. |
| A vulnerability was determined in a2ui-project a2ui 0.9/0.9.1. This issue affects the function updateComponents of the file basic_functions.ts of the component Update Components. Executing a manipulation can lead to resource consumption. The attack can be launched remotely. The project was informed of the problem early through an issue report but has not responded yet. |
| IBM WebSphere Application Server 9.0, and 8.5 is vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to trigger excessive resource consumption, potentially leading to reduced availability of the affected service. |
| A vulnerability was detected in ag-ui-protocol ag-ui 1.0. This impacts an unknown function of the file crates/ag-ui-client/src/sse.rs of the component SSE Frame Parser. Performing a manipulation results in resource consumption. The attack is possible to be carried out remotely. The pull request to fix this issue awaits acceptance. |
| filebrowser through 2.63.23 fails to limit WebSocket message size in the /api/command handler before checking permissions, allowing authenticated users to buffer arbitrarily large messages. Attackers can send oversized WebSocket messages to exhaust server heap memory and cause denial of service regardless of EnableExec setting or Execute permission. |
| Http4s is a Scala interface for HTTP services. Prior to 0.23.37 and 1.0.0-M48, Ember’s HTTP/2 read loop parses a frame’s 24-bit declared length but waits to buffer the entire payload before comparing it with SETTINGS_MAX_FRAME_SIZE. An unauthenticated peer can declare a payload near 16 MiB on a connection where Ember advertised 16 KiB and either complete or slowly stream it, causing up to 1024-fold memory amplification per connection before processFrame can reject the frame. The shared H2Connection.readLoop affects withHttp2 servers and clients, while HTTP/2-disabled configurations are unaffected, and the patch rejects oversized frames before buffering their payloads. This issue is fixed in versions 0.23.37 and 1.0.0-M48. |
| Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, Ember’s HTTP/2 flow-control window is replenished according to bytes received from the network rather than bytes consumed by the application, while each stream stores DATA in an unbounded channel. A hostile peer can therefore send a body faster than a slow or non-draining application consumes it, retaining payloads in heap on an ember-server or ember-client configured with withHttp2. The patch bounds the per-stream H2Connection body channel so application consumption applies backpressure. This issue is fixed in versions 0.23.35 and 1.0.0-M47. |
