| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| LibreOffice documents can contain Basic macro libraries. A library protected by a password is stored in the document in a compiled form, which may be read when the document is loaded. An out-of-bounds write existed when the compiled form was read, because the positions of its strings were not checked against the size of the data they refer to, and a type found by name was not checked to be of the right kind. In fixed versions these positions are checked, a library that fails the check is not loaded, and a type of the wrong kind is ignored. |
| An out-of-bounds read vulnerability in the IOMMU could allow a malicious guest to corrupt hypervisor (HV) pages and potentially cause a host crash leading to loss of availability. |
| A vulnerability in the default configuration of vsomeip allows a remote, unauthenticated attacker to trigger massive memory allocations by sending a small TCP packet with a large, attacker-declared SOME/IP length field. This can lead to immediate service termination via OOM-kill on memory-constrained systems or total host memory exhaustion through repeated connections. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - fix heap-buffer-overflow in ims_pcu_process_data()
The `ims_pcu_process_data()` processes incoming URB data byte by byte.
However, it fails to check if the `read_pos` index exceeds
IMS_PCU_BUF_SIZE.
If a malicious USB device sends a packet larger than IMS_PCU_BUF_SIZE,
`read_pos` will increment indefinitely. Moreover, since `read_pos` is
located immediately after `read_buf`, the attacker can overwrite
`read_pos` itself to arbitrarily control the index.
This manipulated `read_pos` is subsequently used in
`ims_pcu_handle_response()` to copy data into `cmd_buf`, leading to a
heap buffer overflow.
Specifically, an attacker can overwrite the `cmd_done.wait.head` located
at offset 136 relative to `cmd_buf` in the `ims_pcu_handle_response()`.
Consequently, when the driver calls `complete(&pcu->cmd_done)`, it
triggers a control flow hijack by using the manipulated pointer.
Fix this by adding a bounds check for `read_pos` before writing to
`read_buf`. If the packet is too long, discard it, log a warning,
and reset the parser state.
[dtor: factor out resetting packet state, reset checksum as well] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: p54: validate RX frame length in p54_rx_eeprom_readback()
p54_rx_eeprom_readback() copies the requested EEPROM slice out of a
device-supplied readback frame without checking that the skb actually holds
that many bytes. Commit da1b9a55ff11 ("wifi: p54: prevent buffer-overflow in
p54_rx_eeprom_readback()") closed the destination overflow by copying a
fixed priv->eeprom_slice_size (and rejecting a mismatched advertised len),
but the source side is still unbounded: nothing verifies the frame is long
enough to supply that many bytes.
A malicious USB device can send a short frame whose advertised len matches
priv->eeprom_slice_size while the payload is truncated. The equality check
passes and memcpy() reads past the end of the skb, leaking adjacent heap:
BUG: KASAN: slab-out-of-bounds in p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507)
Read of size 1016 at addr ffff88800f077114 by task swapper/0/0
Call Trace:
<IRQ>
...
__asan_memcpy (mm/kasan/shadow.c:105)
p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507)
p54u_rx_cb (drivers/net/wireless/intersil/p54/p54usb.c:163)
__usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657)
dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:2005)
...
</IRQ>
The buggy address belongs to the object at ffff88800f0770c0
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 84 bytes inside of
allocated 704-byte region [ffff88800f0770c0, ffff88800f077380)
Check that the slice fits in the skb before copying. |
| Out-of-bounds Read vulnerability in the Guththila XML parser wrapper of Apache Axis2/C. On some malformed XML input the Guththila parser returned a raw input byte in place of an event code, and the AXIOM reader wrapper used that value as an index into a ten-entry lookup table without checking its range, reading heap memory past the end of the table. An unauthenticated client could trigger this by sending a crafted XML request to a server built with Guththila, the default parser, causing the request to be parsed incorrectly or, in some cases, the process to crash. The memory read is not returned to the client. This issue affects Apache Axis2/C: through 2.0.0. The fix is available in commits 23110287924e79d05a5b4712298c355d1f05c606 and f01683ec10e8fddb87279ec9351b3239021223e6 and will be included in the next release. |
| Memory overflow in SAML authentication can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway. |
| Memory overflow in Email OTP authentication can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway. |
| Heap-based buffer overflow in Microsoft Office Outlook allows an unauthorized attacker to execute code over a network. |
| Buffer overflow in Skia in Google Chrome prior to 157.0.8103.78 allowed a remote attacker to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Out of bounds read in Compositing in Google Chrome prior to 157.0.8103.78 allowed a remote attacker who had compromised the renderer process to read memory outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| LibreOffice can import documents in the HWP format, including pictures that link to an external file. An out-of-bounds read existed when the link target of a crafted picture was read, so memory past the picture data could end up in the converted document. In fixed versions the link target is taken only from the picture data. |
| LibreOffice Calc can open spreadsheets in the DIF format, and text files such as CSV in the UTF-16 encoding. Both are read one line at a time. An out-of-bounds read existed when a line of a crafted file was read, because the length of the line could be miscalculated, so memory beyond the line could be copied into the imported document. In fixed versions each line is read up to its limit and no further. |
| LibreOffice can import EMF, EMF+ and WMF images, which may be embedded in documents. Several out-of-bounds reads existed in the readers for these formats, because sizes, counts and offsets taken from a crafted image were not checked against the data the image actually holds. In fixed versions these values are checked against the size of each record and the data that remains, and a record that fails the checks is not used. |
| Inconsistent transition-capture state in PostgreSQL MERGE allows a table data modifier to make an AFTER trigger process the wrong new row, via a partitioned table MERGE that performs an INSERT before an UPDATE. Within major versions 15-18, minor versions before PostgreSQL 18.7, 17.12, 16.16, and 15.20 are affected. Versions before PostgreSQL 15 are unaffected. |
| Out of bounds read in Skia in Google Chrome prior to 157.0.8103.78 allowed a remote attacker who had compromised the renderer process to read memory outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Dancer versions before 1.3400 for Perl pass unvalidated session ids from the session cookie to the session engine.
read_session_id returns the cookie value as the session id without checking its characters, and Dancer hands it to the session engine to load the session.
A remote attacker may cause path traversal or injection in a session engine that uses the id in a file path, cache command or query without checking it. |
| bootutil_img_hash() computes the image digest over ih_hdr_size + ih_img_size + ih_protect_tlv_size bytes, all three taken from the candidate image's header, and reads that span out of the slot without checking that it fits in the flash area. The three sizes are also summed without an overflow check. Nothing earlier on the validation path bounds the whole span either: bootutil_img_validate() compares the image size against bootutil_max_image_size() only after the hash has been computed.
The callers bound part of the span, or none of it:
On the swap and overwrite upgrade path, boot_validate_slot() first runs the image header check (boot_is_header_valid(), later boot_check_header_valid()). Before MCUboot 2.2.0 that check covered only ih_hdr_size + ih_img_size, so for every image the protected-TLV area (ih_protect_tlv_size, a uint16_t, up to 65535 bytes) was hashed without being bounded. From 2.2.0 the check includes ih_protect_tlv_size, except for a compressed image in the secondary slot when MCUBOOT_DECOMPRESS_IMAGES (CONFIG_BOOT_DECOMPRESSION) is enabled, which leaves the same gap of up to 64 KB.
Zephyr's single-slot and firmware loaders (boot/zephyr/single_loader.c, boot/zephyr/firmware_loader.c) read the header with boot_image_load_header(), which bounds ih_hdr_size + ih_img_size against the flash area. Before MCUboot 2.4.0 that bound did not include ih_protect_tlv_size, which leaves the same gap of up to 64 KB. From 2.4.0 these loaders bound the whole span.
The serial recovery image-list and image-state handlers (bs_list() and bs_set() in boot/boot_serial/src/boot_serial.c) call bootutil_img_validate() with no header check at all, so on those paths ih_img_size is unbounded as well.
The image is hashed before its signature is checked, so anyone who can place an image in a slot (an OTA or SMP update delivered through the application, or serial recovery) reaches this read before authentication.
Whether a malformed header produces an actual read beyond the area depends on the flash backend:
Backends whose flash_area_read() bounds-checks the request (Zephyr, Espressif, NuttX, Mbed) return an error once the chunked read crosses the end of the area. Validation fails and the image is rejected, with no over-read.
With MCUBOOT_HASH_STORAGE_DIRECTLY (Zephyr CONFIG_BOOT_IMG_HASH_DIRECTLY_ON_STORAGE, available from 2.2.0, not enabled by default) the span is hashed through a single direct pointer into memory-mapped flash, with no bounds check.
The Cypress PSoC6 port's flash_area_read() (boot/cypress/cy_flash_pal/cy_flash_map.c, from 1.6.0) does not bound the read: its assert()s compare against the area's absolute offset rather than its size, and it copies with memcpy().
The bytes read past the area feed only the digest, which is compared internally and never returned, so nothing is disclosed. The realistic effect is a read fault during image validation: up to 64 KB past the slot on the upgrade path and, before 2.4.0, on the Zephyr loaders, and potentially much further on the serial recovery handlers, which skip the header check. Where validation is repeated at every boot (a pending upgrade, or, before 2.4.0, the single-slot loader checking its image), the fault can recur on each reset and keep the device from booting.
The fix makes bootutil_img_hash() add the three sizes with boot_u32_safe_add() and reject an image whose span, including the sector offset used in swap-using-offset mode, does not fit in the flash area, before any of it is hashed. Because the bound is applied where the bytes are read, it covers every caller. |
| The MCUboot TLV iterator bootutil_tlv_iter_next() in boot/bootutil/src/tlv.c walks image trailer TLVs with a single loop guard (it->tlv_off < it->tlv_end) and advances by sizeof(struct image_tlv) + tlv.it_len using the attacker-controlled it_len field, without validating that the entry's header or payload stays within it->tlv_end. As a result the 4-byte header read can extend up to 3 bytes past the declared TLV area, and the returned (off, len) can describe a payload that runs past it.
The path is pre-authentication: TLVs are parsed during bootutil_img_validate() before the signature is verified, and a crafted image can be presented through DFU / serial-recovery / OTA. However the impact is contained by surrounding guards: bootutil_img_validate() first rejects a TLV area larger than bootutil_max_image_size(), the default LOAD_IMAGE_DATA sink is flash_area_read() which bounds-checks against the flash partition and fails an out-of-partition read, and every payload consumer (EXPECTED_HASH_TLV, EXPECTED_KEY_TLV, EXPECTED_SIG_TLV, IMAGE_TLV_SEC_CNT) clamps len against a fixed buffer before copying.
The residual effect in a default flash build is therefore an out-of-region read confined to the attacker's own slot partition whose result is never observable, yielding at worst a clean validation failure rather than memory corruption or information disclosure. A genuine (though still bounded) out-of-bounds read remains under the non-default MCUBOOT_RAM_LOAD configuration, where LOAD_IMAGE_DATA is an unchecked memcpy. The fix is to validate each entry's header and payload against it->tlv_end inside the iterator. |
| Mattermost Desktop App versions <=6.3 6.0.3 6.3.2.0 fail to validate the SiteURL value returned in a server's client configuration before constructing a server object from it which allows an operator of a server configured in the Desktop app to render the application persistently unusable across restarts via an unparseable SiteURL that triggers an uncaught exception reaching the process-level critical error handler. Mattermost Advisory ID: MMSA-2026-00770 |