| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| JetKVM prior to 0.5.4 does not verify the authenticity of downloaded firmware files. An attacker-in-the-middle or a compromised update server could modify the firmware and the corresponding SHA256 hash to pass verification. |
| The GL-iNet Comet (GL-RM1) KVM connects to a GL-iNet site during boot-up to provision client and CA certificates. The GL-RM1 does not verify certificates used for this connection, allowing an attacker-in-the-middle to serve invalid client and CA certificates. The GL-RM1 will attempt to use the invalid certificates and fail to connect to the legitimate GL-iNet KVM cloud service. |
| The GL-iNet Comet (GL-RM1) KVM web interface does not limit login requests, enabling brute-force attempts to guess credentials. |
| The GL-iNet Comet (GL-RM1) KVM does not require authentication on the UART serial console. This attack requires physically opening the device and connecting to the UART pins. |
| The GL-iNet Comet (GL-RM1) KVM does not sufficiently verify the authenticity of uploaded firmware files. An attacker-in-the-middle or a compromised update server could modify the firmware and the corresponding MD5 hash to pass verification. |
| Issue summary: An OpenSSL TLS 1.3 server may fail to negotiate the expected
preferred key exchange group when its key exchange group configuration includes
the default by using the 'DEFAULT' keyword.
Impact summary: A less preferred key exchange may be used even when a more
preferred group is supported by both client and server, if the group
was not included among the client's initial predicated keyshares.
This will sometimes be the case with the new hybrid post-quantum groups,
if the client chooses to defer their use until specifically requested by
the server.
If an OpenSSL TLS 1.3 server's configuration uses the 'DEFAULT' keyword to
interpolate the built-in default group list into its own configuration, perhaps
adding or removing specific elements, then an implementation defect causes the
'DEFAULT' list to lose its 'tuple' structure, and all server-supported groups
were treated as a single sufficiently secure 'tuple', with the server not
sending a Hello Retry Request (HRR) even when a group in a more preferred tuple
was mutually supported.
As a result, the client and server might fail to negotiate a mutually supported
post-quantum key agreement group, such as 'X25519MLKEM768', if the client's
configuration results in only 'classical' groups (such as 'X25519' being the
only ones in the client's initial keyshare prediction).
OpenSSL 3.5 and later support a new syntax for selecting the most preferred TLS
1.3 key agreement group on TLS servers. The old syntax had a single 'flat'
list of groups, and treated all the supported groups as sufficiently secure.
If any of the keyshares predicted by the client were supported by the server
the most preferred among these was selected, even if other groups supported by
the client, but not included in the list of predicted keyshares would have been
more preferred, if included.
The new syntax partitions the groups into distinct 'tuples' of roughly
equivalent security. Within each tuple the most preferred group included among
the client's predicted keyshares is chosen, but if the client supports a group
from a more preferred tuple, but did not predict any corresponding keyshares,
the server will ask the client to retry the ClientHello (by issuing a Hello
Retry Request or HRR) with the most preferred mutually supported group.
The above works as expected when the server's configuration uses the built-in
default group list, or explicitly defines its own list by directly defining the
various desired groups and group 'tuples'.
No OpenSSL FIPS modules are affected by this issue, the code in question lies
outside the FIPS boundary.
OpenSSL 3.6 and 3.5 are vulnerable to this issue.
OpenSSL 3.6 users should upgrade to OpenSSL 3.6.2 once it is released.
OpenSSL 3.5 users should upgrade to OpenSSL 3.5.6 once it is released.
OpenSSL 3.4, 3.3, 3.0, 1.0.2 and 1.1.1 are not affected by this issue. |
| Wazuh is a free and open source platform used for threat prevention, detection, and response. Starting in version 3.9.0 and prior to version 4.14.3, a privilege escalation vulnerability exists in the Wazuh Manager's cluster synchronization protocol. The `wazuh-clusterd` service allows authenticated nodes to write arbitrary files to the manager’s file system with the permissions of the `wazuh` system user. Due to insecure default permissions, the `wazuh` user has write access to the manager's main configuration file (`/var/ossec/etc/ossec.conf`). By leveraging the cluster protocol to overwrite `ossec.conf`, an attacker can inject a malicious `<localfile>` command block. The `wazuh-logcollector` service, which runs as root, parses this configuration and executes the injected command. This chain allows an attacker with cluster credentials to gain full Root Remote Code Execution, violating the principle of least privilege and bypassing the intended security model. Version 4.14.3 fixes the issue. |
| ### Impact
Spinnaker updated URL Validation logic on user input to provide sanitation on user inputted URLs for clouddriver. However, they missed that Java URL objects do not correctly handle underscores on parsing. This led to a bypass of the previous CVE (CVE-2025-61916) through the use of carefully crafted URLs. Note, Spinnaker found this not just in that CVE, but in the existing URL validations in Orca fromUrl expression handling. This CVE impacts BOTH artifacts as a result.
### Patches
This has been merged and will be available in versions 2025.4.1, 2025.3.1, 2025.2.4 and 2026.0.0.
### Workarounds
You can disable the various artifacts on this system to work around these limits. |
| A Use-After-Free vulnerability has been discovered in GRUB's gettext module. This flaw stems from a programming error where the gettext command remains registered in memory after its module is unloaded. An attacker can exploit this condition by invoking the orphaned command, causing the application to access a memory location that is no longer valid. An attacker could exploit this vulnerability to cause grub to crash, leading to a Denial of Service. Possible data integrity or confidentiality compromise is not discarded. |
| libcurl would wrongly close the same eventfd file descriptor twice when taking
down a connection channel after having completed a threaded name resolve. |
| Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior to 8.6.40 and 9.6.0-alpha.14, the GraphQL WebSocket endpoint for subscriptions does not pass requests through the Express middleware chain that enforces authentication, introspection control, and query complexity limits. An attacker can connect to the WebSocket endpoint and execute GraphQL operations without providing a valid application or API key, access the GraphQL schema via introspection even when public introspection is disabled, and send arbitrarily complex queries that bypass configured complexity limits. This vulnerability is fixed in 8.6.40 and 9.6.0-alpha.14. |
| OpenClaw versions prior to 2026.2.14 contain an oauth state validation bypass vulnerability in the manual Chutes login flow that allows attackers to bypass CSRF protection. An attacker can convince a user to paste attacker-controlled OAuth callback data, enabling credential substitution and token persistence for unauthorized accounts. |
| OpenClaw versions prior to 2026.2.13 contain a denial of service vulnerability in webhook handlers that buffer request bodies without strict byte or time limits. Remote unauthenticated attackers can send oversized JSON payloads or slow uploads to webhook endpoints causing memory pressure and availability degradation. |
| OpenClaw versions prior to 2026.2.15 use SHA-1 to hash sandbox identifier cache keys for Docker and browser sandbox configurations, which is deprecated and vulnerable to collision attacks. An attacker can exploit SHA-1 collisions to cause cache poisoning, allowing one sandbox configuration to be misinterpreted as another and enabling unsafe sandbox state reuse. |
| Craft CMS is a content management system (CMS). From version 4.0.0-RC1 to before version 4.17.5 and from version 5.0.0-RC1 to before version 5.9.11, the AssetsController->replaceFile() method has a targetFilename body parameter that is used unsanitized in a deleteFile() call before Assets::prepareAssetName() is applied on save. This allows an authenticated user with replaceFiles permission to delete arbitrary files within the same filesystem root by injecting ../ path traversal sequences into the filename. This could allow an authenticated user with replaceFiles permission on one volume to delete files in other folders/volumes that share the same filesystem root. This only affects local filesystems. This issue has been patched in versions 4.17.5 and 5.9.11. |
| Craft CMS is a content management system (CMS). From version 5.6.0 to before version 5.9.11, in src/controllers/EntryTypesController.php, the $settings array from parse_str is passed directly to Craft::configure() without Component::cleanseConfig(). This allows injecting Yii2 behavior/event handlers via "as" or "on" prefixed keys, the same attack vector as the original advisory. Craft control panel administrator permissions and allowAdminChanges must be enabled for this to work. This issue has been patched in version 5.9.11. |
| Craft CMS is a content management system (CMS). From version 4.0.0-RC1 to before version 4.17.5 and from version 5.0.0-RC1 to before version 5.9.11, there is a Behavior injection RCE vulnerability in ElementIndexesController and FieldsController. Craft control panel administrator permissions and allowAdminChanges must be enabled for this to work. This issue has been patched in versions 4.17.5 and 5.9.11. |
| OpenClaw versions prior to 2026.2.14 contain an authorization bypass vulnerability where Telegram allowlist matching accepts mutable usernames instead of immutable numeric sender IDs. Attackers can spoof identity by obtaining recycled usernames to bypass allowlist restrictions and interact with bots as unauthorized senders. |
| Craft CMS is a content management system (CMS). From version 4.0.0-RC1 to before version 4.17.6 and from version 5.0.0-RC1 to before version 5.9.12, a low-privilege user (or an unauthenticated user who has been sent a shared URL) can escalate their privileges to admin by abusing UsersController->actionImpersonateWithToken. This issue has been patched in versions 4.17.6 and 5.9.12. |
| OpenClaw versions 2026.1.30 and earlier, contain an information disclosure vulnerability, patched in 2026.2.1, in the MS Teams attachment downloader (optional extension must be enabled) that leaks bearer tokens to allowlisted suffix domains. When retrying downloads after receiving 401 or 403 responses, the application sends Authorization bearer tokens to untrusted hosts matching the permissive suffix-based allowlist, enabling token theft. |
