| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Hardcoded Password Vulnerability have been found in CENTUM. Affected products contain a hardcoded password for the user account (PROG) used for CENTUM Authentication Mode within the system. Under the following conditions, there is a risk that an attacker could log in as the PROG user.
The default permission for the PROG users is S1 permission (equivalent to OFFUSER). Therefore, for properly permission-controlled targets of operation and monitoring, even if an attacker user in as the PROG user, the risk of critical operations or configuration changes being performed is considered low. (If the PROG user's permissions have been changed for any reason, there is a risk that operations or configuration changes may be performed under the modified permissions. The CVSS values below are for the default permissions.)
Additionally, exploiting this vulnerability requires an attacker to already have access to the HIS screen controls. Therefore, an attacker can already operate and monitor at that point, regardless of this vulnerability.
The conditions under which this vulnerability is exploited:
If all of the following conditions are met, the affected products are vulnerable to this vulnerability.
-An attacker obtains the hardcoded password using a certain method.
-The HIS with the affected product installed is configured in CTM authentication mode.
-An attacker must have direct access to the aforementioned HIS or be able to break into it remotely using a certain method and perform screen operations.
The affected products and versions are as follows: CENTUM VP R5.01.00 to R5.04.20, R6.01.00 to R6.12.00 and R7.01.00. |
| An integer overflow vulnerability in the HTTP chunked transfer encoding parser in tinyproxy up to and including version 1.11.3 allows an unauthenticated remote attacker to cause a denial of service (DoS). The issue occurs because chunk size values are parsed using strtol() without properly validating overflow conditions (e.g., errno == ERANGE). A crafted chunk size such as 0x7fffffffffffffff (LONG_MAX) bypasses the existing validation check (chunklen < 0), leading to a signed integer overflow during arithmetic operations (chunklen + 2). This results in incorrect size calculations, causing the proxy to attempt reading an extremely large amount of request-body data and holding worker connections open indefinitely. An attacker can exploit this behavior to exhaust all available worker slots, preventing new connections from being accepted and causing complete service unavailability. Upstream addressed this issue in commit bb7edc4; however, the latest stable release (1.11.3) remains affected at the time of publication. |
| Heimdall is a cloud native Identity Aware Proxy and Access Control Decision service. When using Heimdall in envoy gRPC decision API mode with versions 0.7.0-alpha through 0.17.10, wrong encoding of the query URL string allows rules with non-wildcard path expressions to be bypassed. Envoy splits the requested URL into parts, and sends the parts individually to Heimdall. Although query and path are present in the API, the query field is documented to be always empty and the URL query is included in the path field. The implementation uses go's url library to reconstruct the url which automatically encodes special characters in the path. As a consequence, a parameter like /mypath?foo=bar to Path is escaped into /mypath%3Ffoo=bar. Subsequently, a rule matching /mypath no longer matches and is bypassed. The issue can only lead to unintended access if Heimdall is configured with an "allow all" default rule. Since v0.16.0, Heimdall enforces secure defaults and refuses to start with such a configuration unless this enforcement is explicitly disabled, e.g. via --insecure-skip-secure-default-rule-enforcement or the broader --insecure flag. This issue has been fixed in version 0.17.11. |
| The SureForms – Contact Form, Payment Form & Other Custom Form Builder plugin for WordPress is vulnerable to Payment Amount Bypass in all versions up to, and including, 2.5.2. This is due to the create_payment_intent() function performing a payment validation solely based on the value of a user-controlled parameter. This makes it possible for unauthenticated attackers to bypass configured form payment-amount validation and create underpriced payment/subscription intents by setting form_id to 0. |
| OpenEMR is a free and open source electronic health records and medical practice management application. Prior to version 8.0.0.3, a stored cross-site scripting vulnerability in the CCDA document preview allows an attacker who can upload or send a CCDA document to execute arbitrary JavaScript in a clinician's browser session when the document is previewed. The XSL stylesheet sanitizes attributes for all other narrative elements but not for `linkHtml`, allowing `href="javascript:..."` and event handler attributes to pass through unchanged. Version 8.0.0.3 patches the issue. |
| A weakness has been identified in Orc discount up to 3.0.1.2. This issue affects the function compile of the file markdown.c of the component Markdown Handler. This manipulation causes uncontrolled recursion. The attack is restricted to local execution. The exploit has been made available to the public and could be used for attacks. The project maintainer confirms: "[I]f you feed it an infinitely deep blockquote input it will crash. (...) [T]his is a duplicate of an old bug that I've been working on." |
| The Download Monitor plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 5.1.7 via the executePayment() function due to missing validation on a user controlled key. This makes it possible for unauthenticated attackers to complete arbitrary pending orders by exploiting a mismatch between the PayPal transaction token and the local order, allowing theft of paid digital goods by paying a minimal amount for a low-cost item and using that payment token to finalize a high-value order. |
| A security flaw has been discovered in Netcore Power 15AX up to 3.0.0.6938. Affected by this issue is the function setTools of the file /bin/netis.cgi of the component Diagnostic Tool Interface. Performing a manipulation of the argument IpAddr results in os command injection. Remote exploitation of the attack is possible. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| The Angular SSR is a server-rise rendering tool for Angular applications. Versions on the 22.x branch prior to 22.0.0-next.2, the 21.x branch prior to 21.2.3, and the 20.x branch prior to 20.3.21 have an Open Redirect vulnerability in `@angular/ssr` due to an incomplete fix for CVE-2026-27738. While the original fix successfully blocked multiple leading slashes (e.g., `///`), the internal validation logic fails to account for a single backslash (`\`) bypass. When an Angular SSR application is deployed behind a proxy that passes the `X-Forwarded-Prefix` header, an attacker provides a value starting with a single backslash, the internal validation failed to flag the single backslash as invalid, the application prepends a leading forward slash, resulting in a `Location` header containing the URL, and modern browsers interpret the `/\` sequence as `//`, treating it as a protocol-relative URL and redirecting the user to the attacker-controlled domain. Furthermore, the response lacks the `Vary: X-Forwarded-Prefix` header, allowing the malicious redirect to be stored in intermediate caches (Web Cache Poisoning). Versions 22.0.0-next.2, 21.2.3, and 20.3.21 contain a patch. Until the patch is applied, developers should sanitize the `X-Forwarded-Prefix` header in their `server.ts` before the Angular engine processes the request. |
| Ory Keto is am open source authorization server for managing permissions at scale. Prior to version 26.2.0, the GetRelationships API in Ory Keto is vulnerable to SQL injection due to flaws in its pagination implementation. Pagination tokens are encrypted using the secret configured in `secrets.pagination`. An attacker who knows this secret can craft their own tokens, including malicious tokens that lead to SQL injection. If this configuration value is not set, Keto falls back to a hard-coded default pagination encryption secret. Because this default value is publicly known, attackers can generate valid and malicious pagination tokens manually for installations where this secret is not set. This issue can be exploited when GetRelationships API is directly or indirectly accessible to the attacker, the attacker can pass a raw pagination token to the affected API, and the configuration value `secrets.pagination` is not set or known to the attacker. An attacker can execute arbitrary SQL queries through forged pagination tokens. As a first line of defense, immediately configure a custom value for `secrets.pagination` by generating a cryptographically secure random secret. Next, upgrade Keto to a fixed version, 26.2.0 or later, as soon as possible. |
| A flaw was found in Keycloak. An administrator with `manage-clients` permission can exploit a misconfiguration where this permission is equivalent to `manage-permissions`. This allows the administrator to escalate privileges and gain control over roles, users, or other administrative functions within the realm. This privilege escalation can occur when admin permissions are enabled at the realm level. |
| Authelia is an open-source authentication and authorization server providing two-factor authentication and single sign-on (SSO) for applications via a web portal. In version 4.39.15, an attacker may potentially be able to inject javascript into the Authelia login page if several conditions are met simultaneously. Unless both the `script-src` and `connect-src` directives have been modified it's almost impossible for this to have a meaningful impact. However if both of these are and they are done so without consideration to their potential impact; there is a are situations where this vulnerability could be exploited. This is caused to the lack of neutralization of the `langauge` cookie value when rendering the HTML template. This vulnerability is likely difficult to discover though fingerprinting due to the way Authelia is designed but it should not be considered impossible. The additional requirement to identify the secondary application is however likely to be significantly harder to identify along side this, but also likely easier to fingerprint. Users should upgrade to 4.39.16 or downgrade to 4.39.14 to mitigate the issue. The overwhelming majority of installations will not be affected and no workarounds are necessary. The default value for the Content Security Policy makes exploiting this weakness completely impossible. It's only possible via the deliberate removal of the Content Security Policy or deliberate inclusion of clearly noted unsafe policies. |
| ClearanceKit intercepts file-system access events on macOS and enforces per-process access policies. In versions on the 4.1 branch and earlier, the opfilter Endpoint Security system extension enforced file access policy exclusively by intercepting ES_EVENT_TYPE_AUTH_OPEN events. Seven additional file operation event types were not intercepted, allowing any locally running process to bypass the configured FAA policy without triggering a denial. Commit a3d1733 adds subscriptions for all seven event types and routes them through the existing FAA policy evaluator. AUTH_RENAME and AUTH_UNLINK additionally preserve XProtect change detection: events on the XProtect path are allowed and trigger the existing onXProtectChanged callback rather than being evaluated against user policy. All versions on the 4.2 branch contain the fix. No known workarounds are available. |
| A weakness has been identified in SourceCodester Note Taking App up to 1.0. This impacts an unknown function. This manipulation causes cross-site request forgery. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. |
| n8n is an open source workflow automation platform. Prior to versions 2.14.1, 2.13.3, and 1.123.26, an authenticated user with permission to create or modify workflows could use the Merge node's "Combine by SQL" mode to read local files on the n8n host and achieve remote code execution. The AlaSQL sandbox did not sufficiently restrict certain SQL statements, allowing an attacker to access sensitive files on the server or even compromise the instance. The issue has been fixed in n8n versions 2.14.1, 2.13.3, and 1.123.26. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations: Limit workflow creation and editing permissions to fully trusted users only, and/or disable the Merge node by adding `n8n-nodes-base.merge` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| A vulnerability was found in Totolink LR350 9.3.5u.6369_B20220309. This vulnerability affects the function setWiFiGuestCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ssid results in buffer overflow. The attack can be launched remotely. The exploit has been made public and could be used. |
| A flaw has been found in wandb OpenUI up to 1.0. This affects the function create_share/get_share of the file backend/openui/server.py of the component HTMLAnnotator Component. Executing a manipulation of the argument ID can lead to HTML injection. The attack may be performed from remote. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The Oxygen Theme theme for WordPress is vulnerable to Server-Side Request Forgery in all versions up to, and including, 6.0.8 via the laborator_calc_route AJAX action. This makes it possible for unauthenticated attackers to make web requests to arbitrary locations originating from the web application and can be used to query and modify information from internal services. |
| xwpe 1.5.30a-2.1 and prior contains a stack-based buffer overflow vulnerability that allows local attackers to execute arbitrary code by supplying overly long input strings that exceed buffer boundaries. Attackers can craft malicious command-line arguments with 262 bytes of junk data followed by shellcode to overwrite the instruction pointer and achieve code execution or denial of service. |
| NRSS RSS Reader 0.3.9-1 contains a stack buffer overflow vulnerability that allows local attackers to execute arbitrary code by supplying an oversized argument to the -F parameter. Attackers can craft a malicious input with 256 bytes of padding followed by a controlled EIP value to overwrite the return address and achieve code execution. |
