| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in grub2 where the grub_extcmd_dispatcher() function calls grub_arg_list_alloc() to allocate memory for the grub's argument list. However, it fails to check in case the memory allocation fails. Once the allocation fails, a NULL point will be processed by the parse_option() function, leading grub to crash or, in some rare scenarios, corrupt the IVT data. |
| A security issue was discovered in Kubernetes where users may be able to launch containers that bypass the mountable secrets policy enforced by the ServiceAccount admission plugin when using containers, init containers, and ephemeral containers with the envFrom field populated. The policy ensures pods running with a service account may only reference secrets specified in the service account’s secrets field. Kubernetes clusters are only affected if the ServiceAccount admission plugin and the kubernetes.io/enforce-mountable-secrets annotation are used together with containers, init containers, and ephemeral containers with the envFrom field populated. |
| nanoid (aka Nano ID) before 5.0.9 mishandles non-integer values. 3.3.8 is also a fixed version. |
| The net/http HTTP/1.1 client mishandled the case where a server responds to a request with an "Expect: 100-continue" header with a non-informational (200 or higher) status. This mishandling could leave a client connection in an invalid state, where the next request sent on the connection will fail. An attacker sending a request to a net/http/httputil.ReverseProxy proxy can exploit this mishandling to cause a denial of service by sending "Expect: 100-continue" requests which elicit a non-informational response from the backend. Each such request leaves the proxy with an invalid connection, and causes one subsequent request using that connection to fail. |
| A flaw was found in the OpenShift console. Several endpoints in the application use the authHandler() and authHandlerWithUser() middleware functions. When the default authentication provider ("openShiftAuth") is set, these functions do not perform any authentication checks, relying instead on the targeted service to handle authentication and authorization. This issue leads to various degrees of data exposure due to a lack of proper credential verification. |
| When parsing a multipart form (either explicitly with Request.ParseMultipartForm or implicitly with Request.FormValue, Request.PostFormValue, or Request.FormFile), limits on the total size of the parsed form were not applied to the memory consumed while reading a single form line. This permits a maliciously crafted input containing very long lines to cause allocation of arbitrarily large amounts of memory, potentially leading to memory exhaustion. With fix, the ParseMultipartForm function now correctly limits the maximum size of form lines. |
| It is possible to construct a zone such that some queries to it will generate responses containing numerous records in the Additional section. An attacker sending many such queries can cause either the authoritative server itself or an independent resolver to use disproportionate resources processing the queries. Zones will usually need to have been deliberately crafted to attack this exposure.
This issue affects BIND 9 versions 9.11.0 through 9.11.37, 9.16.0 through 9.16.50, 9.18.0 through 9.18.32, 9.20.0 through 9.20.4, 9.21.0 through 9.21.3, 9.11.3-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.50-S1, and 9.18.11-S1 through 9.18.32-S1. |
| A flaw was found in the OpenShift build process, where the docker-build container is configured with a hostPath volume mount that maps the node's /var/lib/kubelet/config.json file into the build pod. This file contains sensitive credentials necessary for pulling images from private repositories. The mount is not read-only, which allows the attacker to overwrite it. By modifying the config.json file, the attacker can cause a denial of service by preventing the node from pulling new images and potentially exfiltrating sensitive secrets. This flaw impacts the availability of services dependent on image pulls and exposes sensitive information to unauthorized parties. |
| A flaw was found in the Avahi-daemon, where it initializes DNS transaction IDs randomly only once at startup, incrementing them sequentially after that. This predictable behavior facilitates DNS spoofing attacks, allowing attackers to guess transaction IDs. |
| A flaw was found in the OpenShift Console, an endpoint for plugins to serve resources in multiple languages: /locales/resources.json. This endpoint's lng and ns parameters are used to construct a filepath in pkg/plugins/handlers unsafely.go#L112 Because of this unsafe filepath construction, an authenticated user can manipulate the path to retrieve any JSON files on the console's pod by using sequences of ../ and valid directory paths. |
| A flaw was found in openshift/builder. This vulnerability allows command injection via path traversal, where a malicious user can execute arbitrary commands on the OpenShift node running the builder container. When using the “Docker” strategy, executable files inside the privileged build container can be overridden using the `spec.source.secrets.secret.destinationDir` attribute of the `BuildConfig` definition. An attacker running code in a privileged container could escalate their permissions on the node running the container. |
| The ip package through 2.0.1 for Node.js might allow SSRF because some IP addresses (such as 127.1, 01200034567, 012.1.2.3, 000:0:0000::01, and ::fFFf:127.0.0.1) are improperly categorized as globally routable via isPublic. NOTE: this issue exists because of an incomplete fix for CVE-2023-42282. |
| A flaw was found in CIRCL's implementation of the FourQ elliptic curve. This vulnerability allows an attacker to compromise session security via low-order point injection and incorrect point validation during Diffie-Hellman key exchange. |
| A flaw was found in Rust's Ring package. A panic may be triggered when overflow checking is enabled. In the QUIC protocol, this flaw allows an attacker to induce this panic by sending a specially crafted packet. It will likely occur unintentionally in 1 out of every 2**32 packets sent or received. |
| A Denial of Service (DoS) vulnerability exists in the jaraco/zipp library, affecting all versions prior to 3.19.1. The vulnerability is triggered when processing a specially crafted zip file that leads to an infinite loop. This issue also impacts the zipfile module of CPython, as features from the third-party zipp library are later merged into CPython, and the affected code is identical in both projects. The infinite loop can be initiated through the use of functions affecting the `Path` module in both zipp and zipfile, such as `joinpath`, the overloaded division operator, and `iterdir`. Although the infinite loop is not resource exhaustive, it prevents the application from responding. The vulnerability was addressed in version 3.19.1 of jaraco/zipp. |
| A flaw was found in grub2. Grub's dump command is not blocked when grub is in lockdown mode, which allows the user to read any memory information, and an attacker may leverage this in order to extract signatures, salts, and other sensitive information from the memory. |
| The HTTP client drops sensitive headers after following a cross-domain redirect. For example, a request to a.com/ containing an Authorization header which is redirected to b.com/ will not send that header to b.com. In the event that the client received a subsequent same-domain redirect, however, the sensitive headers would be restored. For example, a chain of redirects from a.com/, to b.com/1, and finally to b.com/2 would incorrectly send the Authorization header to b.com/2. |
| A flaw was found in Eclipse Che che-machine-exec. This vulnerability allows unauthenticated remote arbitrary command execution and secret exfiltration (SSH keys, tokens, etc.) from other users' Developer Workspace containers, via an unauthenticated JSON-RPC / websocket API exposed on TCP port 3333. |
| A flaw was found in OpenShift Console. A Server Side Request Forgery (SSRF) attack can happen if an attacker supplies all or part of a URL to the server to query. The server is considered to be in a privileged network position and can often reach exposed services that aren't readily available to clients due to network filtering. Leveraging such an attack vector, the attacker can have an impact on other services and potentially disclose information or have other nefarious effects on the system.
The /api/dev-console/proxy/internet endpoint on the OpenShift Console allows authenticated users to have the console's pod perform arbitrary and fully controlled HTTP(s) requests. The full response to these requests is returned by the endpoint.
While the name of this endpoint suggests the requests are only bound to the internet, no such checks are in place. An authenticated user can therefore ask the console to perform arbitrary HTTP requests from outside the cluster to a service inside the cluster. |
| find-my-way is a fast, open source HTTP router, internally using a Radix Tree (aka compact Prefix Tree), supports route params, wildcards, and it's framework independent. A bad regular expression is generated any time one has two parameters within a single segment, when adding a `-` at the end, like `/:a-:b-`. This may cause a denial of service in some instances. Users are advised to update to find-my-way v8.2.2 or v9.0.1. or subsequent versions. There are no known workarounds for this issue. |
