| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An issue was discovered in RISC-V PicoRV32 commit 87c89a. A mismatch in the PCPI INSN and memory address can lead to unexpected behavior. |
| dataCycle is a data management system for centrally storing, managing, searching, finding, and distributing data. In dataCycle-CORE, the module handling core processing and framework rules, before and including version 25.07.3, the application accepts unlimited password guesses against both the browser login flow and the JSON login endpoint. The source code enables Devise's `:lockable` module on the user model but explicitly disables both lock and unlock strategies, and no request throttling or rate-limiting layer was identified in the Rails code. This creates a direct online password-guessing risk:
- valid user accounts can be attacked continuously without temporary lockout
- the same weakness is reachable through both `/users/sign_in` and `/api/v4/auth/login`
- successful guessing yields a normal session cookie in the HTML flow or a fresh JWT in the API flow
- the API endpoint is especially attractive for automation because it requires no CSRF token
This has been patched in version 26.06.08. |
| Net::DNS versions through 1.55 for Perl allow Denial of Service via deep DNS compression pointer chains.
Net::DNS::DomainName::decode follows RFC 1035 compression pointers by recursing into itself with no depth limit. It is possible to construct a name which saturates the call stack (at least with larger TCP responses), leading to a potential Denial of Service.
The guard `$link < $offset` prevents forward and circular chains, but still allows arbitrarily long backward chains. The per-offset cache (`$cache`) is populated at the start of each call and short-circuits only re-traverses of the same offset - the initial descent through a fresh chain still recurses at full depth.
A crafted packet can chain two-byte compression pointers so that each one points two bytes earlier than the previous, producing a chain length of `offset / 2`. For the 14-bit pointer field (max offset 16383) this gives up to ~8191 recursive frames. For a TCP DNS message the limit is the 16-bit length field (~32767 frames). Perl's default C stack handles only a few thousand frames; beyond that the process receives SIGSEGV or similar, which is a denial-of-service for any application parsing untrusted DNS data.
The vulnerability is triggered by `Net::DNS::Packet->new(\$wire)` i.e. any point where the library decodes a DNS message from the network. |
| Net::DNS versions through 1.55 for Perl allow remote execution injection via EDNS EXTENDED ERROR.
Net::DNS::RR::OPT::EXTENDED_ERROR::_decompose parses the EXTRA-TEXT field of an EDNS EXTENDED-ERROR option (RFC 8914) by tokenising the raw bytes and passing the result to Perl's eval. There is some escaping done for $ and @, but not for backticks. This can be exploited for command execution if $pkt->edns->option('EXTENDED-ERROR') is called in array context, for example with a payload of {0:`"<command>"`} in EXTRA-TEXT. |
| NanoMQ contains a protocol-semantics flaw in its MQTT v5 `SUBSCRIBE` handling: if a subscription entry is missing the final 1-byte `Subscription Options` field, the broker may still accept the malformed packet and install the subscription into internal broker state. Under a specific packet-length construction, the same parser flaw also causes a 1-byte out-of-bounds read that crosses the real heap allocation boundary and is detected by ASAN as a `heap-buffer-overflow`.
If the consumed byte happens to look acceptable, NanoMQ may continue and append the malformed subscription entry into its internal `subinfol` state. In that case, a `SUBSCRIBE` packet that should be rejected by MQTT rules is instead treated as a successful subscription. Whether ASAN reports the bug does not depend on MQTT's logical `remain` boundary; it depends on whether the read crosses the real heap allocation boundary of the underlying message buffer. In other words, these are not two unrelated issues. They are two manifestations of the same parsing defect: by default, it appears as a semantic vulnerability, and under suitable input conditions, it also becomes a verifiable out-of-bounds read vulnerability. |
| An issue in MCMS v.6.1.1 allows a remote attacker to obtain sensitive information via the source parameter. |
| xrdp is an open source RDP server. Versions 0.10.6 and prior contain a timing side-channel vulnerability in the login interface. Due to a discrepancy in response processing times, a remote attacker can infer the existence of a username on the system, leading to unauthorized information disclosure via username enumeration. This issue has been fixed in version 0.10.6.1. |
| cool-admin-java 8.0.0 has a SQL injection vulnerability in the order() method of CrudOption.java. |
| Buffer Overflow vulnerability in libjxl v.0.11.2 and before allows a local attacker to obtain sensitive information via the DecodeImageAPNG function |
| RustDesk before 1.4.9 does not enforce a session's authorized connection scope on the server side, so a peer granted a limited session type (FileTransfer, PortForward, ViewCamera, or Terminal) can send control messages and login options reserved for a full Remote session. An authenticated remote peer can exploit this missing scope check to act outside its granted scope, injecting out-of-scope control messages to observe and control the host beyond the permissions it was given. |
| The Tag plugin for GLPI 11 before 2.14.4 stores the tag name without HTML sanitization and renders it into the Kanban badge markup via PluginTagTag::preKanbanContent() without output escaping, resulting in stored cross-site scripting. An authenticated user with TAG MANAGEMENT create or update rights can set a tag name containing HTML, which then executes in the browser of any user who opens the Kanban view of a ticket, problem, change, or project the tag is attached to. |
| OpenPLC_v3 contains a heap-based buffer overflow in the getData() function in webserver/core/modbus_master.cpp. getData() reads characters between two delimiters into a caller-supplied buffer with no size parameter and no bounds check. In parseConfig() the function is invoked with the 100-byte heap-allocated MB_device.dev_name field. An authenticated attacker with access to the OpenPLC web interface can send a crafted HTTP POST to the /modbus endpoint with an oversized device_name value; the value is persisted to mbconfig.cfg and parsed on load, overflowing dev_name and overwriting adjacent struct fields (protocol at offset 108, dev_address at offset 109, ip_port at offset 210). A 200-byte payload writes 100 bytes past the allocation. The result is heap corruption leading to runtime crash and denial of service of the PLC process control loop, with attacker-controlled overwrite of adjacent configuration fields. The upstream repository was archived on 2026-04-04 and no fix is expected; the vendor has confirmed the issue does not affect OpenPLC Runtime v4. |
| secure_headers manages application of security headers with many safe defaults. Prior to 7.3.0, secure_headers builds the Content-Security-Policy value by stitching directives with ; separators, and build_sandbox_list_directive, build_media_type_list_directive, and build_report_to_directive interpolate caller-supplied strings without scrubbing ;, \r, or \n. When untrusted input reaches SecureHeaders.override_content_security_policy_directives or append APIs for :sandbox, :plugin_types, or :report_to, an attacker can inject a CSP directive such as script-src 'unsafe-inline' * before the legitimate script-src, enabling XSS reachability through these sinks or CSP report exfiltration. This issue is fixed in version 7.3.0. |
| HeyForm is an open-source form builder. Prior to version 3.0.0-rc.9, `POST /api/upload` has no authentication guard, no global guard, no form-context validation, no `openToken` requirement, and no session cookie check. Any anonymous internet user can upload files (PDF, DOC/DOCX, XLS/XLSX, CSV, TXT, MP4, images, etc., up to 10 MB) and receive a permanent public URL on the HeyForm domain. The endpoint is used by both authenticated form creators and unauthenticated form submitters; because no form-context binding exists, every request to it is anonymously accepted. Version 3.0.0-rc.9 contains a patch for the issue. |
| dataCycle is a data management system for centrally storing, managing, searching, finding, and distributing data. In dataCycle-CORE, the module handling core processing and framework rules, before and including version 25.07.3, a low-privileged authenticated API user can supply `forwardToUrl` and `redirectUrl` values when triggering password reset or confirmation flows. Those values are then embedded into the outgoing email workflow without host allowlisting. This creates two related abuse paths:
- password reset or confirmation links can be sent to a victim with the token already attached to an attacker-controlled `forwardToUrl`
- after a legitimate password reset completes, the browser is redirected to attacker-controlled `redirectUrl`
In practice, this can be used for phishing, token capture, confirmation hijacking, or steering a victim from a trusted email
into an attacker domain. This is patched in version 26.06.08. |
| libvips is a fast image processing library with low memory needs. The `tiffload` operation in libvips versions before and including 8.18.1 could incorrectly determine the number of channels in a JPEG or JPEG2000-encoded tile within a TIFF image, leading to a possible buffer overflow. This has been patched in version 8.18.2. |
| Network-AI is a TypeScript/Node.js multi-agent orchestrator. Prior to version 5.12.2, `AgentRuntime` promises scoped file access under a configured sandbox `basePath`, but its path containment checks use raw string prefix tests. A sandbox base such as `/tmp/network-ai-sandbox` also matches a sibling path such as `/tmp/network-ai-sandbox_evil/secret.txt`. An agent/user that can call `AgentRuntime.readFile()` or `AgentRuntime.listDir()` can read or list files outside the intended sandbox when the target path is in a sibling directory sharing the base path prefix. This breaks the documented sandbox boundary. The issue is fixed in v5.12.2. `SandboxPolicy.resolvePath()` and `isPathAllowed()` now use separator-anchored prefix checks (`resolved === base || resolved.startsWith(base + path.sep)`) for both the allow-list and block-list. A sibling directory that merely shares a name prefix (e.g. `/srv/app-evil` vs base `/srv/app`) is no longer treated as in-scope. |
| Webmin is a web-based system administration tool for Unix-like servers. Prior to version 2.640, for Webmin accounts that require a second authentication factor (typically TOTP), an attacker with knowledge of the username and password can bypass the 2FA requirement by using Basic authentication. Webmin is a web-based system administration tool for Unix-like servers. As a workaround, apply the patch from commit da18a16c84ae5c0b78cad79609cb0efb174000ec manually. |
| In nanomq versions 0.24.11 and earlier, a NULL pointer dereference in `properties_parse()` allows an authenticated attacker to crash the NanoMQ broker by sending a POST request to `/api/v4/mqtt/publish` with `user_properties` as a JSON array instead of a JSON object. The crash occurs because `strlen()` is called on a NULL `item->string` pointer when iterating over array elements. An authenticated attacker can exploit this to crash the NanoMQ broker process. This is patched in version 0.24.14. |
| dataCycle is a data management system for centrally storing, managing, searching, finding, and distributing data. In dataCycle-CORE, the module handling core processing and framework rules, before and including version 25.07.3, any unauthenticated attacker can place arbitrary HTML into flash notifications on public routes and rely on the frontend toast component to inject that content into the DOM with `innerHTML`. This creates a reflected DOM XSS that can be delivered with a crafted link to a public page such as `/docs`. Because the vulnerable JavaScript is loaded by the normal application layout, the issue is not limited to a special debug page or an isolated admin-only view. |
