| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Hard-coded ASP.NET/IIS machineKey value in Digital Knowledge KnowledgeDeliver deployments prior to February 24, 2026 allows adversaries to circumvent ViewState validation mechanisms and achieve remote code execution via malicious ViewState deserialization attacks |
| A privilege escalation vulnerability in Microchip IStaX allows an authenticated low-privileged user to recover a shared per-device cookie secret from their own webstax_auth session cookie and forge a new cookie with administrative privileges.This issue affects IStaX before 2026.03. |
| Dell PowerScale OneFS, versions prior to 9.12.0.0, contains an improper check for unusual or exceptional conditions vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to denial of service. |
| Dell PowerScale OneFS, versions prior to 9.12.0.0, contains an improper resource shutdown or release vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to denial of service. |
| Insufficient checks of the RMP on host buffer access in IOMMU may allow an attacker with privileges and a compromised hypervisor to trigger an out of bounds condition without RMP checks, resulting in a potential loss of confidential guest integrity. |
| spdystream is a Go library for multiplexing streams over SPDY connections. In versions 0.5.0 and below, the SPDY/3 frame parser does not validate attacker-controlled counts and lengths before allocating memory. Three allocation paths are affected: the SETTINGS frame entry count, the header count in parseHeaderValueBlock, and individual header field sizes — all read as 32-bit integers and used directly as allocation sizes with no bounds checking. Because SPDY header blocks are zlib-compressed, a small on-the-wire payload can decompress into large attacker-controlled values. A remote peer that can send SPDY frames to a service using spdystream can exhaust process memory and cause an out-of-memory crash with a single crafted control frame. This issue has been fixed in version 0.5.1. |
| DataEase is an open-source data visualization and analytics platform. Versions 2.10.20 and below contain a SQL injection vulnerability in the sort parameter of the /de2api/datasetData/enumValueObj endpoint. The DatasetDataManage service layer directly transfers the user-supplied sort value to the sorting metadata DTO, which is passed to Order2SQLObj where it is incorporated into the SQL ORDER BY clause without any whitelist validation, and then executed via CalciteProvider. An authenticated attacker can inject arbitrary SQL commands through the sort parameter, enabling time-based blind SQL injection. This issue has been fixed in version 2.10.21. |
| DataEase is an open-source data visualization and analytics platform. Versions 2.10.20 and below contain a SQL injection vulnerability in the API datasource saving process. The deTableName field from the Base64-encoded datasource configuration is used to construct a DDL statement via simple string replacement without any sanitization or escaping of the table name. An authenticated attacker can inject arbitrary SQL commands by crafting a deTableName that breaks out of identifier quoting, enabling error-based SQL injection that can extract database information such as the MySQL version. This issue has been fixed in version 2.10.21. |
| A missing lock verification in AMD Secure Processor (ASP) firmware may permit a locally authenticated attacker with administrative privileges to alter MMIO routing on some Zen 5-based products, potentially compromising guest system integrity. |
| DataEase is an open-source data visualization and analytics platform. Versions 2.10.20 and below contain a JDBC parameter blocklist bypass vulnerability in the MySQL datasource configuration. The Mysql class uses Lombok's @Data annotation, which auto-generates a public setter for the illegalParameters field that contains the JDBC security blocklist. When a datasource configuration is submitted as JSON, Jackson deserialization calls setIllegalParameters with an attacker-supplied empty list, replacing the blocklist before getJdbc() validation runs. This allows an authenticated attacker to include dangerous JDBC parameters such as allowLoadLocalInfile=true, and by pointing the datasource at a rogue MySQL server, exploit the LOAD DATA LOCAL INFILE protocol feature to read arbitrary files from the DataEase server filesystem, including sensitive environment variables and database credentials. This issue has been fixed in version 2.10.21. |
| DataEase is an open-source data visualization and analytics platform. Versions 2.10.20 and below contain a SQL injection vulnerability in the /de2api/datasetData/previewSql endpoint. The user-supplied SQL is wrapped in a subquery without validation that the input is a single SELECT statement. Combined with the JDBC blocklist bypass that allows enabling allowMultiQueries=true, an attacker can break out of the subquery and execute arbitrary stacked SQL statements, including UPDATE and other write operations, against the connected database. An authenticated attacker with access to valid datasource credentials can achieve full read and write access to the underlying database. This issue has been fixed in version 2.10.21. |
| DataEase is an open-source data visualization and analytics platform. Versions 2.10.20 and below ship the legacy velocity-1.7.jar, which pulls in commons-collections-3.2.1.jar containing the InvokerTransformer deserialization gadget chain. Quartz 2.3.2, also bundled in the application, deserializes job data BLOBs from the qrtz_job_details table using ObjectInputStream with no deserialization filter or class allowlist. An authenticated attacker who can write to the Quartz job table, such as through the previously described SQL injection in previewSql, can replace a scheduled job's JOB_DATA with a malicious CommonsCollections6 gadget chain payload. When the Quartz cron trigger fires, the payload is deserialized and executes arbitrary commands as root inside the container, achieving full remote code execution. This issue has been fixed in version 2.10.21. |
| Cryptomator is an open-source client-side encryption application for cloud storage. Version 1.19.1 contains a logic flaw in CheckHostTrustController.getAuthority() that allows an attacker to bypass the security fix for CVE-2026-32303. The method hardcodes the URI scheme based on port number, causing HTTPS URLs with port 80 to produce the same authority string as HTTP URLs, which defeats both the consistency check and the HTTP block validation. An attacker with write access to a cloud-synced vault.cryptomator file can craft a Hub configuration where apiBaseUrl and authEndpoint use HTTPS with port 80 to pass auto-trust validation, while tokenEndpoint uses plaintext HTTP. The vault is auto-trusted without user prompt, and a network-positioned attacker can intercept the OAuth token exchange to access the Cryptomator Hub API as the victim. This issue has been fixed in version 1.19.2. |
| My Calendar is a WordPress plugin for managing calendar events. In versions 3.7.6 and below, the mc_ajax_mcjs_action AJAX endpoint, registered for unauthenticated users, passes user-supplied arguments through parse_str() without validation, allowing injection of arbitrary parameters including a site value. On WordPress Multisite installations, this enables an unauthenticated attacker to call switch_to_blog() with an arbitrary site ID and extract calendar events from any sub-site on the network, including private or hidden events. On standard Single Site installations, switch_to_blog() does not exist, causing an uncaught PHP fatal error and crashing the worker thread, creating an unauthenticated denial of service vector. This issue has been fixed in version 3.7.7. |
| free5GC is an open-source implementation of the 5G core network. In versions 1.4.2 and below of the UDR service, the handler for deleting Traffic Influence Subscriptions checks whether the influenceId path segment equals subs-to-notify, but does not return after sending the HTTP 404 response when validation fails. Execution continues and the subscription is deleted regardless. An unauthenticated attacker with access to the 5G Service Based Interface can delete arbitrary Traffic Influence Subscriptions by supplying any value for the influenceId path segment, while the API misleadingly returns a 404 Not Found response. A patched version was not available at the time of publication. |
| free5GC is an open-source implementation of the 5G core network. In versions 4.2.1 and below of the UDR service, the handler for reading Traffic Influence Subscriptions checks whether the influenceId path segment equals subs-to-notify, but does not return after sending the HTTP 404 response when validation fails. Execution continues and the subscription data is returned alongside the 404 response. An unauthenticated attacker with access to the 5G Service Based Interface can read arbitrary Traffic Influence Subscriptions, including SUPIs/IMSIs, DNNs, S-NSSAIs, and callback URIs, by supplying any value for the influenceId path segment. A patched version was not available at the time of publication. |
| free5GC is an open-source implementation of the 5G core network. In versions 4.2.1 and below of the UDR service, the handler for creating or updating Traffic Influence Subscriptions checks whether the influenceId path segment equals subs-to-notify, but does not return after sending the HTTP 404 response when validation fails. Execution continues and the subscription is created or overwritten regardless. An unauthenticated attacker with access to the 5G Service Based Interface can create or overwrite arbitrary Traffic Influence Subscriptions, including injecting attacker-controlled notificationUri values and arbitrary SUPIs, by supplying any value for the influenceId path segment. A patched version was not available at the time of publication. |
| free5GC is an open-source implementation of the 5G core network. In versions 4.2.1 and below of the UDR service, the PUT handler for updating Policy Data notification subscriptions at /nudr-dr/v2/policy-data/subs-to-notify/{subsId} does not return after request body retrieval or deserialization errors. Although HTTP 500 or 400 error responses are sent, execution continues and the processor is invoked with a potentially uninitialized or partially initialized PolicyDataSubscription object. This fail-open behavior may allow unintended modification of existing Policy Data notification subscriptions with invalid or empty input, depending on downstream processor and storage behavior. A patched version was not available at the time of publication. |
| pypdf is a free and open-source pure-python PDF library. In versions prior to 6.10.0, manipulated XMP metadata entity declarations can exhaust RAM. An attacker who exploits this vulnerability can craft a PDF which leads to large memory usage. This requires parsing the XMP metadata. This issue has been fixed in version 6.10.0. |
| A flaw was found in npm-serialize-javascript. The vulnerability occurs because the serialize-javascript module does not properly sanitize certain inputs, such as regex or other JavaScript object types, allowing an attacker to inject malicious code. This code could be executed when deserialized by a web browser, causing Cross-site scripting (XSS) attacks. This issue is critical in environments where serialized data is sent to web clients, potentially compromising the security of the website or web application using this package. |
